Published in Dent Mater on March 21, 2007
The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio. Clin Oral Investig (2012) 0.89
Impact of Gluma Desensitizer on the tensile strength of zirconia crowns bonded to dentin: an in vitro study. Clin Oral Investig (2011) 0.86
The Effect of Cerium Oxide Addition on the Properties and Behavior of Y-TZP. Int Sch Res Notices (2014) 0.75
Effect of liner and porcelain application on zirconia surface structure and composition. Int J Oral Sci (2016) 0.75
Sol-gel dip coating of yttria-stabilized tetragonal zirconia dental ceramic by aluminosilicate nanocomposite as a novel technique to improve the bonding of veneering porcelain. Int J Nanomedicine (2016) 0.75
Biaxial flexural strength and phase transformation of Ce-TZP/Al2O3 and Y-TZP core materials after thermocycling and mechanical loading. J Adv Prosthodont (2014) 0.75
Effect of Surface Treatment on Shear Bond Strength between Resin Cement and Ce-TZP/Al2O3. Biomed Res Int (2016) 0.75
Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites. Dent Mater J (2008) 1.18
In vitro study of the influence of the type of connection on the fracture load of zirconia abutments with internal and external implant-abutment connections. Int J Oral Maxillofac Implants (2009) 0.99
Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina. J Prosthet Dent (2010) 0.90
Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. J Mech Behav Biomed Mater (2013) 0.89
Effect of different adhesives combined with two resin composite cements on shear bond strength to polymeric CAD/CAM materials. Dent Mater J (2013) 0.88
Effect of different surface pre-treatments and luting materials on shear bond strength to PEEK. Dent Mater (2010) 0.87
Bending moments of zirconia and titanium abutments with internal and external implant-abutment connections after aging and chewing simulation. Clin Oral Implants Res (2011) 0.86
Effect of thermal misfit between different veneering ceramics and zirconia frameworks on in vitro fracture load of single crowns. Dent Mater J (2007) 0.85
Shear bond strength of brackets to demineralize enamel after different pretreatment methods. Angle Orthod (2011) 0.84
Repair of silorane composite--using the same substrate or a methacrylate-based composite? Dent Mater (2011) 0.83
The effects of desensitizing resin, resin sealing, and provisional cement on the bond strength of dentin luted with self-adhesive and conventional resincements. J Prosthet Dent (2012) 0.83
Are self-adhesive resin cements a valid alternative to conventional resin cements? A laboratory study of the long-term bond strength. Dent Mater (2012) 0.83
Impact of thermal properties of veneering ceramics on the fracture load of layered Ce-TZP/A nanocomposite frameworks. Dent Mater (2008) 0.82
Shear bond strength of orthodontic resins after caries infiltrant preconditioning. Angle Orthod (2012) 0.82
Influence of PEEK surface modification on surface properties and bond strength to veneering resin composites. J Adhes Dent (2014) 0.82
The effect of thermal cycling on metal-ceramic bond strength. J Dent (2009) 0.80
Effect of caries infiltrant application on shear bond strength of different adhesive systems to sound and demineralized enamel. J Adhes Dent (2012) 0.80
The effect of different pretreatment methods of PMMA-based crowns on the long-term tensile bond strength to dentin abutments. Clin Oral Investig (2014) 0.79
Fracture load of milled polymeric fixed dental prostheses as a function of connector cross-sectional areas. J Prosthet Dent (2013) 0.79
The influence of grain size on low-temperature degradation of dental zirconia. J Biomed Mater Res B Appl Biomater (2011) 0.79
In vitro study of the influence of dentin desensitizing and sealing on the shear bond strength of two universal resin cements. J Adhes Dent (2010) 0.78
Investigations in the correlation between Martens hardness and flexural strength of composite resin restorative materials. Dent Mater J (2010) 0.78
Retention force of differently fabricated telescopic PEEK crowns with different tapers. Dent Mater J (2016) 0.77
Influence of abutment model materials on the fracture loads of three-unit fixed dental prostheses. Dent Mater J (2014) 0.77
In vitro fatigue and fracture resistance of one- and two-piece CAD/CAM zirconia implant abutments. Int J Oral Maxillofac Implants (2015) 0.77
Bending moments and types of failure of zirconia and titanium abutments with internal implant-abutment connections: a laboratory study. Int J Oral Maxillofac Implants (2012) 0.77
The effect of ceramic primer on shear bond strength of resin composite cement to zirconia: a function of water storage and thermal cycling. J Am Dent Assoc (2013) 0.77
Accuracy of mechanical torque-limiting gauges for mini-screw placement. Clin Oral Implants Res (2010) 0.77
Impact of plasma treatment of PMMA-based CAD/CAM blanks on surface properties as well as on adhesion to self-adhesive resin composite cements. Dent Mater (2013) 0.77
Impact of surface treatment of different reinforced glass-ceramic anterior crowns on load bearing capacity. Dent Mater J (2015) 0.76
Effects of different chlorhexidine pretreatments on adhesion of metal brackets in vitro. Head Face Med (2012) 0.76
Evaluation of bond strength of resin cements using different general-purpose statistical software packages for two-parameter Weibull statistics. Dent Mater (2012) 0.75
Bending moments of zirconia and titanium implant abutments supporting all-ceramic crowns after aging. Clin Oral Implants Res (2013) 0.75
The effects of internal tooth bleaching regimens on composite-to-composite bond strength. J Am Dent Assoc (2012) 0.75
Load-bearing capacity of soldered and subsequently veneered 4-unit zirconia FDPs. J Mech Behav Biomed Mater (2013) 0.75
Influence of dentin and enamel pretreatment with acidic sulfur compounds on adhesive performance. Clin Oral Investig (2012) 0.75
Influence of residual bone thickness on primary stability of hybrid self-tapping and cylindric non-self-tapping implants in vitro. Int J Oral Maxillofac Implants (2013) 0.75
Three generations of zirconia: From veneered to monolithic. Part I. Quintessence Int (2017) 0.75
Fracture resistance of endodontically treated teeth without ferrule using a novel H-shaped short post. Quintessence Int (2015) 0.75
Effect of sulfuric acid etching of polyetheretherketone on the shear bond strength to resin cements. J Adhes Dent (2014) 0.75
Comparison of fracture loads of CAD/CAM and conventionally fabricated temporary fixed dental prostheses after different aging regimens. Int J Comput Dent (2016) 0.75
Bonding Behaviour of Polyetherketoneketone to Methylmethacrylate- and Dimethacrylate-based Polymers. J Adhes Dent (2017) 0.75
Three generations of zirconia: From veneered to monolithic. Part II. Quintessence Int (2017) 0.75
Glass Fiber Post/Composite Core Systems Bonded to Human Dentin: Analysis of Tensile Load vs Calculated Tensile Strength of Various Systems Using Pull-out Tests. J Adhes Dent (2016) 0.75
Influence of silanes on the shear bond strength of resin cements to zirconia. Quintessence Int (2013) 0.75
Influence of caries infiltrant contamination on shear bond strength of different adhesives to dentin. Clin Oral Investig (2012) 0.75
Effects of differing thickness and mechanical properties of cement on the stress levels and distributions in a three-unit zirconia fixed prosthesis by FEA. J Prosthodont (2014) 0.75
Mold filling and dimensional accuracy of titanium castings in a spinel-based investment. Dent Mater (2009) 0.75