Published in J Biomech Eng on June 01, 2009
Current progress in patient-specific modeling. Brief Bioinform (2009) 1.91
Quantitative assessment of abdominal aortic aneurysm geometry. Ann Biomed Eng (2010) 1.08
A framework for the automatic generation of surface topologies for abdominal aortic aneurysm models. Ann Biomed Eng (2010) 0.97
The role of geometric and biomechanical factors in abdominal aortic aneurysm rupture risk assessment. Ann Biomed Eng (2013) 0.95
The effect of material model formulation in the stress analysis of abdominal aortic aneurysms. Ann Biomed Eng (2009) 0.94
A relation between near-wall particle-hemodynamics and onset of thrombus formation in abdominal aortic aneurysms. Ann Biomed Eng (2011) 0.91
Fluid-structure interaction modeling of abdominal aortic aneurysms: the impact of patient-specific inflow conditions and fluid/solid coupling. J Biomech Eng (2013) 0.89
The importance of patient-specific regionally varying wall thickness in abdominal aortic aneurysm biomechanics. J Biomech Eng (2013) 0.87
Surface curvature as a classifier of abdominal aortic aneurysms: a comparative analysis. Ann Biomed Eng (2012) 0.79
Biomechanical rupture risk assessment of abdominal aortic aneurysms based on a novel probabilistic rupture risk index. J R Soc Interface (2015) 0.78
Biomechanical Rupture Risk Assessment: A Consistent and Objective Decision-Making Tool for Abdominal Aortic Aneurysm Patients. Aorta (Stamford) (2016) 0.77
The association of wall mechanics and morphology: a case study of abdominal aortic aneurysm growth. J Biomech Eng (2011) 0.76
Improving the efficiency of abdominal aortic aneurysm wall stress computations. PLoS One (2014) 0.76
Robust infrarenal aortic aneurysm lumen centerline detection for rupture status classification. Med Eng Phys (2013) 0.76
An approach for patient-specific multi-domain vascular mesh generation featuring spatially varying wall thickness modeling. J Biomech (2015) 0.75
Interaction of expanding abdominal aortic aneurysm with surrounding tissue: Retrospective CT image studies. J Nat Sci (2015) 0.75
Geometric Predictors of Abdominal Aortic Aneurysm Maximum Wall Stress. Chem Eng Trans (2016) 0.75
A Review of Computational Methods to Predict the Risk of Rupture of Abdominal Aortic Aneurysms. Biomed Res Int (2015) 0.75
The Association Between Geometry and Wall Stress in Emergently Repaired Abdominal Aortic Aneurysms. Ann Biomed Eng (2017) 0.75
Broadband phonon mean free path contributions to thermal conductivity measured using frequency domain thermoreflectance. Nat Commun (2013) 1.73
Endoluminal treatment of type IA endoleak with Onyx. J Vasc Surg (2010) 1.43
A comparative analysis of bench-top performance assessment of distal protection filters in transient flow conditions. J Endovasc Ther (2012) 1.38
Fluid-structure interaction in abdominal aortic aneurysms: effects of asymmetry and wall thickness. Biomed Eng Online (2005) 1.38
A decade of change in abdominal aortic aneurysm repair in the United States: Have we improved outcomes equally between men and women? J Vasc Surg (2006) 1.35
Improving aneurysm-related outcomes: nationwide benefits of endovascular repair. J Vasc Surg (2006) 1.28
Wall stress and flow dynamics in abdominal aortic aneurysms: finite element analysis vs. fluid-structure interaction. Comput Methods Biomech Biomed Engin (2008) 1.26
Semiautomatic vessel wall detection and quantification of wall thickness in computed tomography images of human abdominal aortic aneurysms. Med Phys (2010) 1.25
Does hostile neck anatomy preclude successful endovascular aortic aneurysm repair? J Vasc Surg (2003) 1.25
Monocytes mediate metastatic breast tumor cell adhesion to endothelium under flow. FASEB J (2013) 1.10
Blood flow dynamics in saccular aneurysm models of the basilar artery. J Biomech Eng (2006) 1.09
Quantitative assessment of abdominal aortic aneurysm geometry. Ann Biomed Eng (2010) 1.08
An analysis of the complete strain field within Flexercell membranes. J Biomech (2004) 1.05
A biomechanics-based rupture potential index for abdominal aortic aneurysm risk assessment: demonstrative application. Ann N Y Acad Sci (2006) 1.04
A framework for the automatic generation of surface topologies for abdominal aortic aneurysm models. Ann Biomed Eng (2010) 0.97
Flow-induced wall shear stress in abdominal aortic aneurysms: Part I--steady flow hemodynamics. Comput Methods Biomech Biomed Engin (2002) 0.95
The role of geometric and biomechanical factors in abdominal aortic aneurysm rupture risk assessment. Ann Biomed Eng (2013) 0.95
The effect of material model formulation in the stress analysis of abdominal aortic aneurysms. Ann Biomed Eng (2009) 0.94
Flow-induced wall shear stress in abdominal aortic aneurysms: Part II--pulsatile flow hemodynamics. Comput Methods Biomech Biomed Engin (2002) 0.92
In vitro performance assessment of distal protection devices for carotid artery stenting: effect of physiological anatomy on vascular resistance. J Endovasc Ther (2007) 0.92
Bioprinting of growth factors onto aligned sub-micron fibrous scaffolds for simultaneous control of cell differentiation and alignment. Biomaterials (2011) 0.92
Variability of computational fluid dynamics solutions for pressure and flow in a giant aneurysm: the ASME 2012 Summer Bioengineering Conference CFD Challenge. J Biomech Eng (2013) 0.92
Fluid-structure interaction modeling of abdominal aortic aneurysms: the impact of patient-specific inflow conditions and fluid/solid coupling. J Biomech Eng (2013) 0.89
Color-flow duplex ultrasound scan versus computed tomographic scan in the surveillance of endovascular aneurysm repair. J Vasc Surg (2003) 0.88
The importance of patient-specific regionally varying wall thickness in abdominal aortic aneurysm biomechanics. J Biomech Eng (2013) 0.87
Disease progression in contralateral carotid artery is common after endarterectomy. J Vasc Surg (2004) 0.85
Flow dynamics in anatomical models of abdominal aortic aneurysms: computational analysis of pulsatile flow. Acta Cient Venez (2003) 0.85
The influence of hemodynamics and wall biomechanics on the thrombogenicity of vein segments perfused in vitro. J Surg Res (2004) 0.84
In vitro performance assessment of distal protection filters: pulsatile flow conditions. J Endovasc Ther (2009) 0.83
Two-dimensional versus three-dimensional CT scan for aortic measurement. J Endovasc Ther (2003) 0.83
Biaxial mechanical modeling of the small intestine. J Mech Behav Biomed Mater (2011) 0.82
Local Quantification of Wall Thickness and Intraluminal Thrombus Offer Insight into the Mechanical Properties of the Aneurysmal Aorta. Ann Biomed Eng (2015) 0.80
Vascular resistance in the carotid artery: an in vitro investigation of embolic protection filters. J Vasc Interv Radiol (2008) 0.80
Abdominal aortic aneurysm: from clinical imaging to realistic replicas. J Biomech Eng (2014) 0.80
The Angioguard embolic protection device. Expert Rev Med Devices (2008) 0.79
The effect of immunosuppression on lower extremity arterial bypass outcomes. Ann Vasc Surg (2011) 0.79
Relevance of carotid stenosis progression as a predictor of ischemic neurological outcomes. Arch Intern Med (2003) 0.79
Numerical simulation of particle transport and deposition in the pulmonary vasculature. J Biomech Eng (2014) 0.79
Surface curvature as a classifier of abdominal aortic aneurysms: a comparative analysis. Ann Biomed Eng (2012) 0.79
Assessing the impact of distal protection filter design characteristics on 30-day outcomes of carotid artery stenting procedures. J Vasc Surg (2012) 0.78
Reproducibility of IVUS border detection for carotid atherosclerotic plaque assessment. Med Eng Phys (2011) 0.78
A pull-back algorithm to determine the unloaded vascular geometry in anisotropic hyperelastic AAA passive mechanics. Ann Biomed Eng (2012) 0.78
A mechanical characterization of the porcine atria at the healthy stage and after ventricular tachypacing. J Biomech Eng (2012) 0.78
Effects of intraluminal thrombus on patient-specific abdominal aortic aneurysm hemodynamics via stereoscopic particle image velocity and computational fluid dynamics modeling. J Biomech Eng (2014) 0.77
Clinical significance and technical assessment of stent cell geometry in carotid artery stenting. J Endovasc Ther (2009) 0.77
Can the internal iliac artery be safely covered during endovascular repair of abdominal aortic and iliac artery aneurysms? Ann Vasc Surg (2002) 0.77
A feature-based morphing methodology for computationally modeled biological structures applied to left atrial fiber directions. J Biomech Eng (2013) 0.77
Challenging neck anatomy is associated with need for intraoperative endovascular adjuncts during endovascular aortic aneurysm repair (EVAR). Ann Vasc Surg (2011) 0.76
Gender-related differences in the tensile strength of abdominal aortic aneurysm. Ann N Y Acad Sci (2006) 0.76
The association of wall mechanics and morphology: a case study of abdominal aortic aneurysm growth. J Biomech Eng (2011) 0.76
Robust infrarenal aortic aneurysm lumen centerline detection for rupture status classification. Med Eng Phys (2013) 0.76
A Methodology for the Derivation of Unloaded Abdominal Aortic Aneurysm Geometry With Experimental Validation. J Biomech Eng (2016) 0.75
A protocol for measuring pull-off stress of wound-treatment polymers. J Biomech Eng (2014) 0.75
Mechanical behaviour of the human atria. Ann Biomed Eng (2012) 0.75
Computational modeling of distal protection filters. J Endovasc Ther (2010) 0.75
Methodology for predicting oxygen transport on an intravenous membrane oxygenator combining computational and analytical models. J Biomech Eng (2005) 0.75
Flow mixing enhancement from balloon pulsations in an intravenous oxygenator. J Biomech Eng (2005) 0.75
Regulation of tissue factor expression in smooth muscle cells with nitric oxide. J Vasc Surg (2003) 0.75
Computational fluid dynamics evaluation of the cross-limb stent graft configuration for endovascular aneurysm repair. J Biomech Eng (2012) 0.75