Published in J Dent on May 05, 2010
Performance of dental ceramics: challenges for improvements. J Dent Res (2011) 1.08
Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques. J Dent (2011) 1.04
Internal fit of two all-ceramic systems and metal-ceramic crowns. J Appl Oral Sci (2012) 0.89
Dual-scan technique for the customization of zirconia computer-aided design/computer-aided manufacturing frameworks. Eur J Dent (2013) 0.87
Effect of screw access hole preparation on fracture load of implant-supported zirconia-based crowns: an in vitro study. J Dent Res Dent Clin Dent Prospects (2016) 0.76
Effect of framework design on fracture resistance of zirconium oxide posterior fixed partial dentures. Dent Res J (Isfahan) (2012) 0.76
Influence of cyclic loading on the fracture toughness and load bearing capacities of all-ceramic crowns. Int J Oral Sci (2013) 0.75
Current status of implant prosthetics in Japan: a survey among certified dental lab technicians. Int J Implant Dent (2015) 0.75
Effectiveness of a resin-modified glass ionomer liner in reducing hypersensitivity in posterior restorations: a study from the practitioners engaged in applied research and learning network. J Am Dent Assoc (2013) 3.18
Risk factors for osteonecrosis of the jaws: a case-control study from the CONDOR dental PBRN. J Dent Res (2011) 3.01
Outcomes of endodontic therapy in general practice: a study by the Practitioners Engaged in Applied Research and Learning Network. J Am Dent Assoc (2012) 2.90
Periodontal diagnosis affected by variation in terminology. J Periodontol (2012) 2.13
Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B Appl Biomater (2004) 1.55
Classification of osseointegrated implant surfaces: materials, chemistry and topography. Trends Biotechnol (2010) 1.46
Hertzian contact response of dentin with loading rate and orientation. Arch Oral Biol (2008) 1.38
Simplified drilling technique does not decrease dental implant osseointegration: a preliminary report. J Periodontol (2012) 1.38
Performance of degradable composite bone repair products made via three-dimensional fabrication techniques. J Biomed Mater Res A (2003) 1.36
Engineering long term clinical success of advanced ceramic prostheses. J Mater Sci Mater Med (2007) 1.33
Materials design in the performance of all-ceramic crowns. Biomaterials (2004) 1.25
Basic research methods and current trends of dental implant surfaces. J Biomed Mater Res B Appl Biomater (2009) 1.25
Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. Int J Prosthodont (2010) 1.14
Cements and adhesives for all-ceramic restorations. Dent Clin North Am (2011) 1.12
Competition of fracture mechanisms in monolithic dental ceramics: flat model systems. J Biomed Mater Res B Appl Biomater (2009) 1.12
Factorial analysis of variables influencing stress in all-ceramic crowns. Dent Mater (2005) 1.10
Postoperative hypersensitivity in class I resin-based composite restorations in general practice: interim results. Compend Contin Educ Dent (2009) 1.09
Residual stresses in porcelain-veneered zirconia prostheses. Dent Mater (2012) 1.09
Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques. J Dent (2011) 1.04
All-ceramic systems: laboratory and clinical performance. Dent Clin North Am (2011) 1.03
Practicing dentistry using findings from clinical research: you are closer than you think. J Am Dent Assoc (2006) 1.03
In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing. J Biomed Mater Res A (2007) 1.02
Dentin caries activity in early occlusal lesions selected to receive operative treatment: findings from the Practitioners Engaged in Applied Research and Learning (PEARL) Network. J Am Dent Assoc (2012) 1.01
Argon-based atmospheric pressure plasma enhances early bone response to rough titanium surfaces. J Biomed Mater Res A (2012) 1.00
Engineered cellular response to scaffold architecture in a rabbit trephine defect. J Biomed Mater Res A (2003) 0.98
High strain rate response of rabbit femur bones. J Biomech (2010) 0.93
Performance of hydroxyapatite bone repair scaffolds created via three-dimensional fabrication techniques. J Biomed Mater Res A (2003) 0.93
Treatments for hypersensitive noncarious cervical lesions: a Practitioners Engaged in Applied Research and Learning (PEARL) Network randomized clinical effectiveness study. J Am Dent Assoc (2013) 0.92
The influence of temporary cements on dental adhesive systems for luting cementation. J Dent (2011) 0.92
Assessment of a chair-side argon-based non-thermal plasma treatment on the surface characteristics and integration of dental implants with textured surfaces. J Mech Behav Biomed Mater (2012) 0.92
Comparative reliability analyses of zirconium oxide and lithium disilicate restorations in vitro and in vivo. J Am Dent Assoc (2011) 0.92
Effect of water storage time and composite cement thickness on fatigue of a glass-ceramic trilayer system. J Biomed Mater Res B Appl Biomater (2008) 0.92
The effect of implant design on insertion torque and immediate micromotion. Clin Oral Implants Res (2011) 0.91
Attitudes and expectations of treating deep caries: a PEARL Network survey. Gen Dent (2007) 0.91
Marginal fit of leucite-glass pressable ceramic restorations and ceramic-pressed-to-metal restorations. J Prosthet Dent (2005) 0.91
Advantages of the dental practice-based research network initiative and its role in dental education. J Dent Educ (2011) 0.91
Histological and three-dimensional evaluation of osseointegration to nanostructured calcium phosphate-coated implants. Acta Biomater (2011) 0.90
Osseointegration assessment of chairside argon-based nonthermal plasma-treated Ca-P coated dental implants. J Biomed Mater Res A (2012) 0.90
Effect of framework design on crown failure. Eur J Oral Sci (2009) 0.90
Load-bearing properties of minimal-invasive monolithic lithium disilicate and zirconia occlusal onlays: finite element and theoretical analyses. Dent Mater (2013) 0.90
Effect of proximal wall height on all-ceramic crown core stress distribution: a finite element analysis study. Int J Prosthodont (2009) 0.90
In vitro wear resistance of three types of polymethyl methacrylate denture teeth. J Appl Oral Sci (2008) 0.90
Internal fit of two all-ceramic systems and metal-ceramic crowns. J Appl Oral Sci (2012) 0.89
Effect of titanium implant surface nanoroughness and calcium phosphate low impregnation on bone cell activity in vitro. Oral Surg Oral Med Oral Pathol Oral Radiol Endod (2010) 0.89
Removal torque and histomorphometric evaluation of bioceramic grit-blasted/acid-etched and dual acid-etched implant surfaces: an experimental study in dogs. J Periodontol (2008) 0.88
Comparison of the fracture resistance of endodontically treated teeth restored with prefabricated posts and composite resin cores with different post lengths. J Appl Oral Sci (2007) 0.88
MicroCT analysis of hydroxyapatite bone repair scaffolds created via three-dimensional printing for evaluating the effects of scaffold architecture on bone ingrowth. J Biomed Mater Res A (2008) 0.88
Removing carious dentin using a polymer instrument without anesthesia versus a carbide bur with anesthesia. J Am Dent Assoc (2005) 0.87
Resin bond to indirect composite and new ceramic/polymer materials: a review of the literature. J Esthet Restor Dent (2014) 0.87
Histomorphologic and histomophometric evaluation of immediately and early loaded mini-implants for orthodontic anchorage. Am J Orthod Dentofacial Orthop (2007) 0.87
Restorative outcomes for endodontically treated teeth in the Practitioners Engaged in Applied Research and Learning network. J Am Dent Assoc (2012) 0.86
Thermal/mechanical simulation and laboratory fatigue testing of an alternative yttria tetragonal zirconia polycrystal core-veneer all-ceramic layered crown design. Eur J Oral Sci (2010) 0.86
Monolithic and bi-layer CAD/CAM lithium-disilicate versus metal-ceramic fixed dental prostheses: comparison of fracture loads and failure modes after fatigue. Clin Oral Investig (2012) 0.86
Restoration variables and postoperative hypersensitivity in Class I restorations: PEARL Network findings. Part 2. Compend Contin Educ Dent (2013) 0.86
Fracture strength of teeth with flared root canals restored with glass fibre posts. Int Dent J (2007) 0.86
Evaluation of fracture resistance of endodontically treated teeth restored with prefabricated posts and composites with varying quantities of remaining coronal tooth structure. J Appl Oral Sci (2005) 0.86
Reliability and failure modes of internal conical dental implant connections. Clin Oral Implants Res (2012) 0.86
Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment. J Dent (2012) 0.85
Effect of drilling technique on the early integration of plateau root form endosteal implants: an experimental study in dogs. J Oral Maxillofac Surg (2011) 0.85
Effect of metal primers on microtensile bond strength between zirconia and resin cements. J Prosthet Dent (2011) 0.84
Effect of drilling dimension on implant placement torque and early osseointegration stages: an experimental study in dogs. J Oral Maxillofac Surg (2012) 0.84
Histomorphometry and bone mechanical property evolution around different implant systems at early healing stages: an experimental study in dogs. Implant Dent (2013) 0.84
Characterization and in vivo evaluation of laser sintered dental endosseous implants in dogs. J Biomed Mater Res B Appl Biomater (2012) 0.84
Reliability and fatigue damage modes of zirconia and titanium abutments. Int J Prosthodont (2010) 0.83
Implant biomechanical stability variation at early implantation times in vivo: an experimental study in dogs. Int J Oral Maxillofac Implants (2013) 0.83
Physicochemical Characterization and In Vivo Evaluation of Amorphous and Partially Crystalline Calcium Phosphate Coatings Fabricated on Ti-6Al-4V Implants by the Plasma Spray Method. Int J Biomater (2012) 0.83
Histomorphologic and histomorphometric evaluation of various endosseous implant healing chamber configurations at early implantation times: a study in dogs. Clin Oral Implants Res (2010) 0.83
Histomorphometric evaluation of bioceramic molecular impregnated and dual acid-etched implant surfaces in the human posterior maxilla. Clin Implant Dent Relat Res (2010) 0.83
Evaluation of shear bond strength of composite to porcelain according to surface treatment. Braz Dent J (2003) 0.83
In vivo evaluation of a novel implant coating agent: laminin-1. Clin Implant Dent Relat Res (2013) 0.83
Effect of core design and veneering technique on damage and reliability of Y-TZP-supported crowns. Dent Mater (2012) 0.82