Published in Clin Oral Investig on January 13, 2017
The estimation of cement film thickness by an in vivo technique. Br Dent J (1971) 2.08
Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent (2004) 1.62
A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns. Int J Prosthodont (1998) 1.48
Marginal and internal fits of fixed dental prostheses zirconia retainers. Dent Mater (2008) 1.37
Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations. J Oral Rehabil (2005) 1.29
The effect of various finish line preparations on the marginal seal and occlusal seat of full crown preparations. J Prosthet Dent (1981) 1.24
Determination of the minimum number of marginal gap measurements required for practical in-vitro testing. J Prosthet Dent (2000) 1.20
An investigation of dental luting cement solubility as a function of the marginal gap. J Prosthet Dent (1991) 1.18
Marginal adaptation of three different zirconium dioxide three-unit fixed dental prostheses. J Prosthet Dent (2009) 1.16
Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth. J Oral Rehabil (1999) 1.14
Digitization of simulated clinical dental impressions: virtual three-dimensional analysis of exactness. Dent Mater (2009) 1.14
A standardized method for determination of crown margin fidelity. J Prosthet Dent (1990) 1.13
Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system. J Prosthet Dent (2010) 1.09
Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns. Int J Prosthodont (2003) 1.08
Marginal fit changes during porcelain firing cycles. J Prosthet Dent (1995) 1.07
Marginal adaptation of castable ceramic crowns. J Prosthet Dent (1991) 1.04
Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines, and luting agents: an in vitro evaluation. J Prosthet Dent (2004) 1.02
Fit of all-ceramic posterior fixed partial denture frameworks in vitro. Int J Periodontics Restorative Dent (2007) 1.02
Status of current CAD/CAM technology in dental medicine. Int J Comput Dent (2004) 0.98
Fit of zirconia fixed partial denture: a systematic review. J Oral Rehabil (2010) 0.95
Clinical fit of Procera AllCeram crowns. J Prosthet Dent (2000) 0.95
Influence of the veneering process on the marginal fit of zirconia fixed dental prostheses. J Oral Rehabil (2010) 0.94
Influence of firing cycles on the margin distortion of 3 all-ceramic crown systems. J Prosthet Dent (2005) 0.94
The effects of thermal mismatch and fabrication procedures on the deflection of layered all-ceramic discs. Dent Mater (2005) 0.94
The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns. Quintessence Int (2007) 0.93
Influence of marginal configuration and porcelain addition on the fit of In-Ceram crowns. Biomaterials (1996) 0.93
Evaluation of the absolute marginal discrepancy of zirconia-based ceramic copings. J Prosthet Dent (2011) 0.92
Current status of zirconia-based fixed restorations. J Oral Sci (2010) 0.92
An in vitro evaluation of fit of zirconium-oxide-based ceramic four-unit fixed partial dentures, generated with three different CAD/CAM systems, before and after porcelain firing cycles and after glaze cycles. J Prosthodont (2008) 0.92
Clinical evaluation of marginal fit of a new experimental all-ceramic system before and after cementation. Int J Prosthodont (2004) 0.91
Thermal distortion of different materials in crown construction. J Prosthet Dent (1994) 0.91
Accuracy of ceramic restorations made with two CAD/CAM systems. J Prosthet Dent (2013) 0.90
Marginal fit of castable ceramic crowns. J Prosthet Dent (1992) 0.89
Distortion of ceramometal fixed partial dentures during the firing cycle. J Prosthet Dent (1981) 0.89
Fit of single tooth zirconia copings: comparison between various manufacturing processes. J Prosthet Dent (2011) 0.88
Different CAD/CAM-processing routes for zirconia restorations: influence on fitting accuracy. Clin Oral Investig (2010) 0.88
Marginal adaptation of fixed prosthodontics: a new in vitro 360-degree external examination procedure. Int J Prosthodont (2004) 0.85
Comparison of the marginal adaptation of zirconium dioxide crowns in preparations with two different finish lines. J Prosthodont (2012) 0.85
Comparison of fit of two types of all-ceramic crowns. J Prosthet Dent (1988) 0.83
In vitro evaluation of a glass-ceramic restorative material. J Oral Rehabil (1997) 0.82
Polycarboxylate cements. Five years' experience in general practice. Br Dent J (1972) 0.82
The effect of repeated firings and strength on marginal distortion in two ceramometal systems. J Prosthet Dent (1981) 0.82
The effect of various veneering techniques on the marginal fit of zirconia copings. J Adv Prosthodont (2015) 0.80
Evaluation of marginal fit of two all-ceramic copings with two finish lines. Eur J Dent (2012) 0.80
Influence of finish line design on marginal adaptation of electroformed metal-ceramic crowns. J Prosthet Dent (2006) 0.78
Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systems. Dent Mater J (2011) 0.78
Effect of different retraction and impression techniques on the marginal fit of crowns. J Dent (2008) 0.77
Marginal and internal fit of metal copings fabricated with rapid prototyping and conventional waxing. J Prosthet Dent (2016) 0.77
A microcomputed tomography evaluation of the marginal fit of cobalt-chromium alloy copings fabricated by new manufacturing techniques and alloy systems. J Prosthet Dent (2016) 0.77
Fit of zirconia all-ceramic crowns with different cervical margin designs, before and after porcelain firing and glazing. Dent Mater J (2014) 0.76
The effect of tooth preparation form on the fit of Procera copings. Int J Prosthodont (1999) 0.76
Influence of Tooth Preparation Design on Fitting Accuracy of CAD-CAM Based Restorations. J Esthet Restor Dent (2016) 0.75