Published in Am J Orthod Dentofacial Orthop on September 01, 1986
A comparative study of frictional force in self-ligating brackets according to the bracket-archwire angulation, bracket material, and wire type. Korean J Orthod (2015) 0.82
Frictional resistance of three types of ceramic brackets. J Oral Maxillofac Res (2014) 0.77
Comparative Evaluation of Friction Resistance of Titanium, Stainless Steel, Ceramic and Ceramic with Metal Insert Brackets with Varying Dimensions of Stainless Steel Wire: An In vitro Multi-center Study. J Int Oral Health (2014) 0.76
Fluoride influences nickel-titanium orthodontic wires' surface texture and friction resistance. J Orthod Sci (2016) 0.75
Comparative Evaluation of Frictional Properties, Load Deflection Rate and Surface Characteristics of Different Coloured TMA Archwires - An Invitro Study. J Clin Diagn Res (2015) 0.75
Frictional force released during sliding mechanics in nonconventional elastomerics and self-ligation: An in vitro comparative study. Indian J Dent (2016) 0.75
Friction in perspective. Am J Orthod Dentofacial Orthop (1999) 1.35
On the setting properties of acrylic bone cement. J Bone Joint Surg Am (1973) 1.25
Microleakage of posterior packable resin composites with and without flowable liners. Oper Dent (2001) 1.12
Effect of filler content and size on properties of composites. J Dent Res (1985) 1.03
An in vitro study of apical extrusion of sodium hypochlorite during endodontic canal preparation. J Endod (1995) 1.00
Influence of filler addition to bonding agents on shear bond strength to bovine dentin. Dent Mater (1995) 0.96
Effect of light exposure on fracture toughness and flexural strength of light-cured composites. Dent Mater (1996) 0.94
A comparison of resins for fabricating provisional fixed restorations. Int J Prosthodont (1990) 0.94
Hydrophilic poly(vinyl siloxane) impression materials: dimensional accuracy, wettability, and effect on gypsum hardness. Int J Prosthodont (1992) 0.93
In vitro study of fracture incidence and compressive fracture load of all-ceramic crowns cemented with resin-modified glass ionomer and other luting agents. J Prosthet Dent (1998) 0.91
Effect of the bonding agent on the bond strength between glass ionomer cement and composite resin. Quintessence Int (1989) 0.91
Influence of dentin primer application methods on dentin bond strength. Oper Dent (1997) 0.91
Influence of selected variables on adhesion testing. Dent Mater (1992) 0.91
Corrosion behavior of 2205 duplex stainless steel. Am J Orthod Dentofacial Orthop (1997) 0.90
Carbamide peroxide bleaching: effects on enamel surface hardness and bonding. Oper Dent (1993) 0.90
Effect of porcelain thickness and type of metal-ceramic alloy on color. J Prosthet Dent (1987) 0.90
Influence of thermal cycling on dentin bond strength of two-step bonding systems. Am J Dent (1998) 0.90
Study of the physical properties of type IV gypsum, resin-containing, and epoxy die materials. J Prosthet Dent (2000) 0.89
Comparative tensile strengths of brackets bonded to porcelain with orthodontic adhesive and porcelain repair systems. Am J Orthod Dentofacial Orthop (1988) 0.88
Color stability and colorant effect on maxillofacial elastomers. Part III: weathering effect on color. J Prosthet Dent (1999) 0.88
In vivo disintegration of luting cements. J Am Dent Assoc (1987) 0.86
Color stability and colorant effect on maxillofacial elastomers. Part I: colorant effect on physical properties. J Prosthet Dent (1999) 0.86
The effect of relining on the accuracy and stability of maxillary complete dentures--an in vitro and in vivo study. J Prosthet Dent (1979) 0.86
Laboratory profiles of 30 high copper amalgam alloys. J Am Dent Assoc (1982) 0.85
Effect of filler content of light-cured composites on bond strength to bovine dentine. J Dent (1991) 0.85
Analysis of the dentin-resin interface by use of laser Raman spectroscopy. Dent Mater (2002) 0.85
Color stability and colorant effect on maxillofacial elastomers. Part II: weathering effect on physical properties. J Prosthet Dent (1999) 0.85
Tensile bond strength between glass ionomer cements and composite resins. J Am Dent Assoc (1987) 0.85
Polydimethyl siloxane materials in maxillofacial prosthetics: evaluation and comparison of physical properties. J Prosthet Dent (1985) 0.84
Evaluation of curing units used in private dental offices. Oper Dent (1998) 0.83
Influence of self-etching primer drying time on enamel bond strength of resin composites. J Dent (1999) 0.83
Effect of operator variability on dentin bond strength of two-step bonding systems. Am J Dent (2000) 0.83
Effect of two opaquing techniques and two metal surface conditions on metal-ceramic bond strength. J Prosthet Dent (1995) 0.83
Using a colorimeter to develop an intrinsic silicone shade guide for facial prostheses. J Prosthodont (1998) 0.83
The effect of tooth preparation design on the breaking strength of Dicor crowns: 2. Int J Prosthodont (1991) 0.83
Influence of surface treatment on bond strength between a heat-activated and a light-activated resin composite. Int J Prosthodont (1995) 0.83
Reinforcement of acrylic resins for provisional fixed restorations. Part I: Mechanical properties. Biomed Mater Eng (1997) 0.82
The effect of air abrasion on shear bond strength to dentin with dental adhesives. Oper Dent (1998) 0.82
In vitro wear of new indirect resin composites. Oper Dent (2009) 0.82
Properties of microfilled composite resins as influenced by filler content. J Dent Res (1985) 0.82
Malocclusion in black Americans and Nyeri Kenyans. An epidemiologic study. Angle Orthod (1985) 0.82
Effect of surface coatings on flexural properties of glass ionomers. Eur J Oral Sci (1997) 0.82
The effect of tooth preparation design on the breaking strength of Dicor crowns: Part 1. Int J Prosthodont (1992) 0.82
Microleakage and shear bond strength of resin and porcelain veneers bonded to cast alloys. J Prosthet Dent (1991) 0.81
Influence of bonded amalgam restorations on the fracture strength of teeth. Oper Dent (1997) 0.81
Keratocystic Odontogenic Tumour of the Mandible: a case report of decompression with a customised removable tube and review of literature. N Z Dent J (2015) 0.81
Efficacy testing of visible-light-curing units. Oper Dent (1994) 0.81
Strength mechanisms of dental solder joints. J Dent Res (1975) 0.80
Direct surface pH determinations of setting cements. Oper Dent (1992) 0.80
Effect of crosslinking agent content, monomer functionality, and repeat unit chemistry on properties of unfilled resins. J Biomed Mater Res (1993) 0.80
A comparison of the physical properties of a room temperature vulcanizing silicone modified and unmodified. J Prosthet Dent (1985) 0.79
In vitro evaluation of the use of resin liners to reduce microleakage and improve retention of amalgam restorations. Oper Dent (1992) 0.79
In vitro evaluation of two microleakage detection tests. J Dent (1992) 0.79
A comparative study of the strength of aluminous porcelain and all-ceramic crowns. J Prosthet Dent (1989) 0.79
Incorporation of adhesive liners in amalgam: effect on compressive strength and creep. Am J Dent (1991) 0.79
Resin-modified glass-ionomers: effect of dentin primer application on the development of bond strength. Eur J Oral Sci (1999) 0.79
A clinical study of the effect of pellicle on the degradation of 10% carbamide peroxide within the first hour. Quintessence Int (1999) 0.78
The contribution of a pinhole to the retention and resistance form of veneer crowns. J Prosthet Dent (1986) 0.78
Microwave energy polymerization of poly(methyl methacrylate) denture base resin. Int J Prosthodont (1990) 0.78
The effects of enamel wear on the metal-porcelain interface. J Prosthet Dent (1983) 0.78
Using a resin-modified glass ionomer as an occlusal sealant: a one-year clinical study. J Am Dent Assoc (1996) 0.78
Comparison of microleakage in direct and indirect composite resin restorations in vitro. Oper Dent (1987) 0.78
Physical characteristics of setting of acrylic bone cements. J Biomed Mater Res (1974) 0.78
Bulge ductility of several occlusal contact measuring paper-based and plastic-based sheets. Biomed Mater Eng (1997) 0.77
An in vitro shear bond strength study of enamel/dentin bonding systems on enamel. Oper Dent (1996) 0.77
A comparison of the physical properties of four prosthetic veneering materials. J Prosthet Dent (1989) 0.77
Influence of curing time and distance on microhardness of eight light-cured liners. Oper Dent (1993) 0.77
Correlation study of incisive biting forces with age, sex, and anterior occlusion. J Dent Res (1973) 0.77
Comparison of retentiveness of amalgam bonding agent types. Oper Dent (1998) 0.77
Influence of light irradiation of dentine primers on dentine-resin bond. J Dent (1995) 0.77
Influence of light intensity on shear bond strength to dentin. Am J Dent (1995) 0.77
Soft-tissue changes concurrent with orthodontic tooth movement. Am J Orthod (1974) 0.77
Is partial anodontia a syndrome of Black Americans? Angle Orthod (1978) 0.77
Tensile strength of preceramic solder joints formed using an infrared heat source. Int J Prosthodont (1992) 0.76
Direct restorative resins-a comparative study. J Prosthet Dent (1982) 0.75
Evaluation of an apatite cement as a root end filling material. J Endod (1994) 0.75
Microhardness and anisotropy of the vital osseous interface and endosseous implant supporting bone. J Orthop Res (1998) 0.75
The effects of load misalignment on tensile load testing of direct bonded orthodontic brackets--a finite element model. Am J Orthod Dentofacial Orthop (1994) 0.75
Color stability of composite resins. Gaoxiong Yi Xue Ke Xue Za Zhi (1990) 0.75
In vitro degradation of cements: a comparison of three test methods. J Prosthet Dent (1989) 0.75
Tensile bond strengths of five porcelain repair systems. Oper Dent (1988) 0.75
A topographical assessment of casting ring liners using scanning electron microscopy (SEM). Quintessence Dent Technol (1989) 0.75
Laboratory testing of light-cured glass ionomers as pit and fissure sealants. Gen Dent (1995) 0.75
Comparative study: bond strength and microleakage with dentin bond systems. Oper Dent (1990) 0.75
Repairability of type II glass polyalkenoate (ionomer) cements. J Dent (1991) 0.75
Correlation of bond strength with surface roughness using a new roughness measurement technique. Dent Mater (1994) 0.75
Efficacy of visible-light generators with changes in voltage. Oper Dent (1988) 0.75
Cephalometric analysis of Berry-Treacher-Collins syndrome. Oral Surg Oral Med Oral Pathol (1967) 0.75
Comparison of two tests to determine the castability of dental alloys. Int J Prosthodont (1991) 0.75
Some effects of cooling and chemical retarders on five elastomeric impression materials. Int J Prosthodont (1989) 0.75
Properties related to strength and resistance to abrasion of VariGlass VLC, Fuji II L.C., Ketac-Silver, and Z-100 composite resin. ASDC J Dent Child (1994) 0.75
The image of the spermatic vein on a urethrogram after high velocity missile injury of the urethra in the presence of a varicocele. Br J Urol (1994) 0.75
Effect of die material hue and value on polymerization of indirect resin inlays. Int J Prosthodont (1993) 0.75
The effect on microleakage of interchanging dentine adhesives in two composite resin systems in vitro. Br Dent J (1988) 0.75
The influence of mixing speed on the setting rate of high-copper amalgams. J Am Dent Assoc (1987) 0.75
Influence of dentin surface treatments on the bond strengths of dentin-lining cements. Oper Dent (1986) 0.75
Evaluation of color changes of silicone maxillofacial materials after exposure to sunlight. Dent Mater J (1989) 0.75
Anodic polarization behavior and microstructure of a gallium-based alloy. Dent Mater (1993) 0.75
The effect of surface treatment on the Knoop hardness of Dicor. Int J Prosthodont (1992) 0.75