Published in Artif Organs on July 01, 2002
Thoracic artificial lung impedance studies using computational fluid dynamics and in vitro models. Ann Biomed Eng (2011) 0.92
Evaluation of local gas exchange in a pulsating respiratory support catheter. ASAIO J (2005) 0.91
THE ROLE OF POROUS MEDIA IN MODELING FLUID FLOW WITHIN HOLLOW FIBER MEMBRANES OF THE TOTAL ARTIFICIAL LUNG. J Porous Media (2010) 0.81
Computational evaluation of the thrombogenic potential of a hollow-fiber oxygenator with integrated heat exchanger during extracorporeal circulation. Biomech Model Mechanobiol (2012) 0.81
Effect of impeller design and spacing on gas exchange in a percutaneous respiratory assist catheter. Artif Organs (2014) 0.80
Micro-scale Modeling of Flow and Oxygen Transfer in Hollow Fiber Membrane Bundle. J Memb Sci (2010) 0.77
A theoretical model for evaluation of the design of a hollow-fiber membrane oxygenator. J Artif Organs (2012) 0.76
Darcy Permeability of Hollow Fiber Membrane Bundles Made from Membrana Polymethylpentene Fibers Used in Respiratory Assist Devices. ASAIO J (2016) 0.75
Computational study of the blood flow in three types of 3D hollow fiber membrane bundles. J Biomech Eng (2013) 0.75
Synthesis, characterization, and cytocompatibility of elastomeric, biodegradable poly(ester-urethane)ureas based on poly(caprolactone) and putrescine. J Biomed Mater Res (2002) 2.49
Design and analysis of tissue engineering scaffolds that mimic soft tissue mechanical anisotropy. Biomaterials (2006) 2.40
Ultrasonic imaging of tumor angiogenesis using contrast microbubbles targeted via the tumor-binding peptide arginine-arginine-leucine. Cancer Res (2005) 2.34
Myocardial ischemic memory imaging with molecular echocardiography. Circulation (2007) 2.13
Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications. Biomaterials (2005) 2.08
Microintegrating smooth muscle cells into a biodegradable, elastomeric fiber matrix. Biomaterials (2005) 1.91
Ultrasound imaging of acute cardiac transplant rejection with microbubbles targeted to intercellular adhesion molecule-1. Circulation (2003) 1.83
In vivo evaluation of a porous, elastic, biodegradable patch for reconstructive cardiac procedures. Ann Thorac Surg (2007) 1.72
The National Heart, Lung, and Blood Institute Pediatric Circulatory Support Program. Circulation (2006) 1.67
Synthesis, characterization and therapeutic efficacy of a biodegradable, thermoresponsive hydrogel designed for application in chronic infarcted myocardium. Biomaterials (2009) 1.62
Fate of culture-expanded mesenchymal stem cells in the microvasculature: in vivo observations of cell kinetics. Circ Res (2008) 1.62
Fabrication of biodegradable elastomeric scaffolds with sub-micron morphologies. J Biomed Mater Res A (2004) 1.61
Modulating targeted adhesion of an ultrasound contrast agent to dysfunctional endothelium. Ann Biomed Eng (2002) 1.59
Biodegradable poly(ether ester urethane)urea elastomers based on poly(ether ester) triblock copolymers and putrescine: synthesis, characterization and cytocompatibility. Biomaterials (2004) 1.57
Targeted ultrasound contrast agents: in vitro assessment of endothelial dysfunction and multi-targeting to ICAM-1 and sialyl Lewisx. Biotechnol Bioeng (2005) 1.53
Characterization of the complete fiber network topology of planar fibrous tissues and scaffolds. Biomaterials (2010) 1.51
Development of a tissue-engineered vascular graft combining a biodegradable scaffold, muscle-derived stem cells and a rotational vacuum seeding technique. Biomaterials (2007) 1.48
An elastic, biodegradable cardiac patch induces contractile smooth muscle and improves cardiac remodeling and function in subacute myocardial infarction. J Am Coll Cardiol (2007) 1.44
Fabrication of cell microintegrated blood vessel constructs through electrohydrodynamic atomization. Biomaterials (2007) 1.34
Intra-myocardial biomaterial injection therapy in the treatment of heart failure: Materials, outcomes and challenges. Acta Biomater (2010) 1.33
Synthesis, characterization and cytocompatibility of polyurethaneurea elastomers with designed elastase sensitivity. Biomacromolecules (2005) 1.26
Pericyte-based human tissue engineered vascular grafts. Biomaterials (2010) 1.25
A seeding device for tissue engineered tubular structures. Biomaterials (2006) 1.24
Biodegradable elastomeric scaffolds with basic fibroblast growth factor release. J Control Release (2007) 1.21
Targeted in vivo labeling of receptors for vascular endothelial growth factor: approach to identification of ischemic tissue. Circulation (2003) 1.21
A bilayered elastomeric scaffold for tissue engineering of small diameter vascular grafts. Acta Biomater (2009) 1.20
Platelet activation, aggregation, and life span in calves implanted with axial flow ventricular assist devices. Ann Thorac Surg (2002) 1.19
Tissue-to-cellular level deformation coupling in cell micro-integrated elastomeric scaffolds. Biomaterials (2008) 1.18
Flow cytometric assays for quantifying activated ovine platelets. Artif Organs (2007) 1.15
In vivo assessment of a tissue-engineered vascular graft combining a biodegradable elastomeric scaffold and muscle-derived stem cells in a rat model. Tissue Eng Part A (2010) 1.14
Mechanical properties and in vivo behavior of a biodegradable synthetic polymer microfiber-extracellular matrix hydrogel biohybrid scaffold. Biomaterials (2011) 1.13
The engineering of organized human corneal tissue through the spatial guidance of corneal stromal stem cells. Biomaterials (2011) 1.11
Transient elastic support for vein grafts using a constricting microfibrillar polymer wrap. Biomaterials (2008) 1.10
The national heart, lung, and blood institute pediatric circulatory support program: a summary of the 5-year experience. Circulation (2011) 1.10
Biocompatibility assessment of the first generation PediaFlow pediatric ventricular assist device. Artif Organs (2011) 1.08
Elimination of adverse leakage flow in a miniature pediatric centrifugal blood pump by computational fluid dynamics-based design optimization. ASAIO J (2005) 1.08
Hybrid nanofibrous scaffolds from electrospinning of a synthetic biodegradable elastomer and urinary bladder matrix. J Biomater Sci Polym Ed (2008) 1.07
Multilaboratory particle image velocimetry analysis of the FDA benchmark nozzle model to support validation of computational fluid dynamics simulations. J Biomech Eng (2011) 1.05
A small diameter, fibrous vascular conduit generated from a poly(ester urethane)urea and phospholipid polymer blend. Biomaterials (2009) 1.05
Morphological and mechanical characteristics of the reconstructed rat abdominal wall following use of a wet electrospun biodegradable polyurethane elastomer scaffold. Biomaterials (2010) 1.04
On the biomechanical function of scaffolds for engineering load-bearing soft tissues. Acta Biomater (2010) 1.04
Preclinical biocompatibility assessment of the EVAHEART ventricular assist device: coating comparison and platelet activation. J Biomed Mater Res A (2007) 1.03
Bioengineering organized, multilamellar human corneal stromal tissue by growth factor supplementation on highly aligned synthetic substrates. Tissue Eng Part A (2013) 1.02
Thermally responsive injectable hydrogel incorporating methacrylate-polylactide for hydrolytic lability. Biomacromolecules (2010) 1.00
Injectable, rapid gelling and highly flexible hydrogel composites as growth factor and cell carriers. Acta Biomater (2009) 0.99
Polyethylene glycol diisocyanate decreases platelet deposition after balloon injury of rabbit femoral arteries. J Thromb Thrombolysis (2002) 0.99
Covalent surface modification of a titanium alloy with a phosphorylcholine-containing copolymer for reduced thrombogenicity in cardiovascular devices. J Biomed Mater Res A (2009) 0.99
Protein-reactive, thermoresponsive copolymers with high flexibility and biodegradability. Biomacromolecules (2008) 0.99
Elastomeric electrospun polyurethane scaffolds: the interrelationship between fabrication conditions, fiber topology, and mechanical properties. Adv Mater (2011) 0.98
Fiber micro-architecture in the longitudinal-radial and circumferential-radial planes of ascending thoracic aortic aneurysm media. J Biomech (2013) 0.98
Effects of turbulent stresses upon mechanical hemolysis: experimental and computational analysis. ASAIO J (2004) 0.98
Tailoring the degradation kinetics of poly(ester carbonate urethane)urea thermoplastic elastomers for tissue engineering scaffolds. Biomaterials (2010) 0.97
Generating elastic, biodegradable polyurethane/poly(lactide-co-glycolide) fibrous sheets with controlled antibiotic release via two-stream electrospinning. Biomacromolecules (2008) 0.97
Synthesis, characterization and surface modification of low moduli poly(ether carbonate urethane)ureas for soft tissue engineering. Acta Biomater (2009) 0.96
Ultrasound molecular imaging of cardiovascular disease. Nat Clin Pract Cardiovasc Med (2008) 0.96
Right ventricular outflow tract repair with a cardiac biologic scaffold. Cells Tissues Organs (2011) 0.95
Engineered fetal cardiac graft preserves its cardiomyocyte proliferation within postinfarcted myocardium and sustains cardiac function. Tissue Eng Part A (2011) 0.94
Mesenchymal stem cells attenuate angiotensin II-induced aortic aneurysm growth in apolipoprotein E-deficient mice. J Vasc Surg (2011) 0.94
Microstructural manipulation of electrospun scaffolds for specific bending stiffness for heart valve tissue engineering. Acta Biomater (2012) 0.93
Towards microfabricated biohybrid artificial lung modules for chronic respiratory support. Biomed Microdevices (2009) 0.93
In Vitro and In Vivo Performance Evaluation of the Second Developmental Version of the PediaFlow Pediatric Ventricular Assist Device. Cardiovasc Eng Technol (2011) 0.92
In vivo performance of a phospholipid-coated bioerodable elastomeric graft for small-diameter vascular applications. J Biomed Mater Res A (2010) 0.92
Scale-dependent fiber kinematics of elastomeric electrospun scaffolds for soft tissue engineering. J Biomed Mater Res A (2010) 0.92
Current and future considerations in the use of mechanical circulatory support devices. Annu Rev Biomed Eng (2008) 0.91
Assessment of hydraulic performance and biocompatibility of a MagLev centrifugal pump system designed for pediatric cardiac or cardiopulmonary support. ASAIO J (2007) 0.91
Targeted ultrasound imaging using microbubbles. Cardiol Clin (2004) 0.91
Biodegradable polyurethane ureas with variable polyester or polycarbonate soft segments: effects of crystallinity, molecular weight, and composition on mechanical properties. Biomacromolecules (2011) 0.91
Non-invasive characterization of polyurethane-based tissue constructs in a rat abdominal repair model using high frequency ultrasound elasticity imaging. Biomaterials (2013) 0.90
Controlled release of IGF-1 and HGF from a biodegradable polyurethane scaffold. Pharm Res (2011) 0.89
Extended and sequential delivery of protein from injectable thermoresponsive hydrogels. J Biomed Mater Res A (2012) 0.89
Design optimization of blood shearing instrument by computational fluid dynamics. Artif Organs (2005) 0.87
Acute in vivo testing of a respiratory assist catheter: implants in calves versus sheep. ASAIO J (2003) 0.87
Placement of an elastic biodegradable cardiac patch on a subacute infarcted heart leads to cellularization with early developmental cardiomyocyte characteristics. J Card Fail (2012) 0.87
Simple surface modification of a titanium alloy with silanated zwitterionic phosphorylcholine or sulfobetaine modifiers to reduce thrombogenicity. Colloids Surf B Biointerfaces (2010) 0.87
Optimization of ultrasound contrast agents with computational models to improve selection of ligands and binding strength. Biotechnol Bioeng (2010) 0.87
Immobilized Carbonic Anhydrase on Hollow Fiber Membranes Accelerates CO(2) Removal from Blood. J Memb Sci (2012) 0.86
Intramyocardial injection of a synthetic hydrogel with delivery of bFGF and IGF1 in a rat model of ischemic cardiomyopathy. Biomacromolecules (2014) 0.86
Towards the development of a pediatric ventricular assist device. Cell Transplant (2006) 0.86
Elastase-sensitive elastomeric scaffolds with variable anisotropy for soft tissue engineering. Pharm Res (2008) 0.86
Ultrasound detection of myocardial ischemic memory using an E-selectin targeting peptide amenable to human application. Mol Imaging (2014) 0.85
Platelet activation in ovines undergoing sham surgery or implant of the second generation PediaFlow pediatric ventricular assist device. Artif Organs (2011) 0.85
The PediaFlow pediatric ventricular assist device. Semin Thorac Cardiovasc Surg Pediatr Card Surg Annu (2006) 0.85
Optimal elastomeric scaffold leaflet shape for pulmonary heart valve leaflet replacement. J Biomech (2013) 0.85
A three-dimensional gel bioreactor for assessment of cardiomyocyte induction in skeletal muscle-derived stem cells. Tissue Eng Part C Methods (2010) 0.85
The effect of polymer degradation time on functional outcomes of temporary elastic patch support in ischemic cardiomyopathy. Biomaterials (2013) 0.84
Biodegradable elastic patch plasty ameliorates left ventricular adverse remodeling after ischemia-reperfusion injury: a preclinical study of a porous polyurethane material in a porcine model. J Thorac Cardiovasc Surg (2012) 0.84
Blood biocompatibility assessment of an intravenous gas exchange device. Artif Organs (2006) 0.84
Vascular endoluminal delivery of mesenchymal stem cells using acoustic radiation force. Tissue Eng Part A (2011) 0.83
Naive rat amnion-derived cell transplantation improved left ventricular function and reduced myocardial scar of postinfarcted heart. Cell Transplant (2009) 0.83
Surface modification of a titanium alloy with a phospholipid polymer prepared by a plasma-induced grafting technique to improve surface thromboresistance. Colloids Surf B Biointerfaces (2009) 0.82
Development of composite porous scaffolds based on collagen and biodegradable poly(ester urethane)urea. Cell Transplant (2006) 0.82
Efficient, physiologically realistic lung airflow simulations. IEEE Trans Biomed Eng (2011) 0.81
In vivo PEG modification of vascular surfaces for targeted delivery. J Vasc Surg (2011) 0.81
An elastomeric patch electrospun from a blended solution of dermal extracellular matrix and biodegradable polyurethane for rat abdominal wall repair. Tissue Eng Part C Methods (2011) 0.81
Effect of impeller design and spacing on gas exchange in a percutaneous respiratory assist catheter. Artif Organs (2014) 0.80
Hemocompatibility assessment of carbonic anhydrase modified hollow fiber membranes for artificial lungs. Artif Organs (2010) 0.80
Temporal leukocyte numbers and granulocyte activation in pulsatile and rotary ventricular assist device patients. Artif Organs (2013) 0.80
Characterizing the modification of surface proteins with poly(ethylene glycol) to interrupt platelet adhesion. Biomaterials (2006) 0.80
Spatial control of gene expression within a scaffold by localized inducer release. Biomaterials (2011) 0.80