Volumetric dimensional change of six direct core materials.

PubWeight™: 0.91‹?›

🔗 View Article (PMID 15019448)

Published in Dent Mater on May 01, 2004

Authors

Supattriya Chutinan1, Jeffrey A Platt, Michael A Cochran, B Keith Moore

Author Affiliations

1: Department of Restorative Dentistry, Division of Dental Materials, Indiana University School of Dentistry, 1121 West Michigan Street, Indianapolis, IN 46202, USA.

Articles by these authors

Clinical practice guidelines for recall and maintenance of patients with tooth-borne and implant-borne dental restorations. J Am Dent Assoc (2016) 2.06

Review of the effectiveness of various tooth whitening systems. Oper Dent (2009) 1.61

Effect of CPP-ACP paste on mechanical properties of bovine enamel as determined by an ultrasonic device. J Dent (2005) 1.18

Clinical evaluation of in-office and at-home bleaching treatments. Oper Dent (2003) 1.17

Bovine teeth as substitute for human teeth in dental research: a review of literature. J Oral Sci (2011) 1.05

Depth of cure of dental resin composites: ISO 4049 depth and microhardness of types of materials and shades. Oper Dent (2008) 1.04

Effect of a whitening agent application on enamel bond strength of self-etching primer systems. Am J Dent (2004) 1.00

Push-out bond strength of a new endodontic obturation system (Resilon/Epiphany). J Endod (2006) 1.00

Effect of medicaments used in endodontic regeneration technique on the chemical structure of human immature radicular dentin: an in vitro study. J Endod (2012) 0.98

Dimensional accuracy of dental casts: influence of tray material, impression material, and time. J Prosthodont (2002) 0.98

Three different methods to evaluate microleakage of packable composites in Class II restorations. Oper Dent (2003) 0.96

Eight in-office tooth whitening systems evaluated in vivo: a pilot study. Oper Dent (2007) 0.96

The effects of viscoelastic parameters on residual stress development in a zirconia/glass bilayer dental ceramic. Dent Mater (2008) 0.91

Influence of thermal cycling on dentin bond strengths of single-step self-etch adhesive systems. Oper Dent (2007) 0.91

The effect on shear bond strength of rewetting dry dentin with two desensitizers. Oper Dent (2003) 0.90

In vivo study of two carbamide peroxide gels with different desensitizing agents. Oper Dent (2007) 0.89

Effect of air-drying time of single-application self-etch adhesives on dentin bond strength. Oper Dent (2006) 0.87

Clinical evaluation of 15% carbamide peroxide on the surface microhardness and shear bond strength of human enamel. Oper Dent (2007) 0.86

Extended bleaching of tetracycline-stained teeth: a 5-year study. Oper Dent (2006) 0.86

Effect of bleaching on fracture toughness of resin composites. Oper Dent (2009) 0.85

An in vitro comparison of microleakage between Resilon and gutta-percha with a fluid filtration model. J Endod (2007) 0.85

Bioactive glass-ionomer cement with potential therapeutic function to dentin capping mineralization. Eur J Oral Sci (2008) 0.84

Color stability, gloss, and surface roughness of indirect composite resins. J Oral Sci (2013) 0.84

Curing efficiency of three different curing lights at different distances for a hybrid composite. Am J Dent (2009) 0.83

Important compositional characteristics in the clinical use of adhesive systems. J Oral Sci (2014) 0.82

Influence of different ceramics on resin cement Knoop Hardness Number. Oper Dent (2008) 0.82

The direct cytotoxic effects of medicaments used in endodontic regeneration on human dental pulp cells. Dent Traumatol (2014) 0.82

Microtensile bond strength of glass ionomer cements to artificially created carious dentin. Oper Dent (2006) 0.82

The effect of fatigue damage on the force required to remove a restoration in a cement-retained implant system. J Prosthodont (2006) 0.82

Anticariogenic and antibacterial properties of a copper varnish using an in vitro microbial caries model. Oper Dent (2008) 0.81

A framework for estimating probability of a match in forensic bite mark identification. J Forensic Sci (2010) 0.81

Metal-ceramic alloys in dentistry: a review. J Prosthodont (2008) 0.81

Bonding durability of single-step adhesives to previously acid-etched dentin. Oper Dent (2008) 0.81

A comparative study of the accuracy between plastic and metal impression transfer copings for implant restorations. J Prosthodont (2013) 0.80

Impact of refrigeration on the surface hardness of hybrid and microfilled composite resins. Braz Dent J (2009) 0.80

Nanotube-modified dentin adhesive--physicochemical and dentin bonding characterizations. Dent Mater (2013) 0.79

A clinical evaluation of two in-office bleaching regimens with and without tray bleaching. Oper Dent (2009) 0.79

A novel approach to evaluate the effect of medicaments used in endodontic regeneration on root canal surface indentation. Clin Oral Investig (2013) 0.79

Decades of bond strength. Oper Dent (2010) 0.79

pH changes upon mixing of single-step self-etching adhesives with powdered dentin. J Adhes Dent (2011) 0.79

Extrusion shear strength between an alumina-based ceramic and three different cements. J Prosthet Dent (2007) 0.79

Evaluation of fracture toughness of human dentin using elastic-plastic fracture mechanics. J Biomech (2008) 0.79

Influence of adhesive application time on enamel bond strength of single-step self-etch adhesive systems. Oper Dent (2010) 0.79

Influence of polishing instruments on the surface texture of resin composites. Quintessence Int (2006) 0.78

Influence of environmental conditions on dentin bond strengths of one-application adhesive systems. Oper Dent (2004) 0.78

Dental fracture fragment attachment: fracture model and luting agent comparisons. J Indiana Dent Assoc (2004) 0.77

Comparison of rotary instrumentation and continuous wave obturation to reciprocating instrumentation and single cone obturation with a hydrophilic sealer. J Endod (2008) 0.77

Influence of delayed placement of composites over cured adhesives on dentin bond strength of single-application self-etch systems. Oper Dent (2006) 0.77

Influence of polymerization mode of dual-polymerized resin direct core foundation systems on bond strengths to bovine dentin. J Prosthet Dent (2004) 0.77

A statistical evaluation of microtensile bond strength methodology for dental adhesives. Dent Mater (2006) 0.77

A clinical evaluation of two in-office bleaching products. Oper Dent (2003) 0.77

Analysis of the enamel/adhesive resin interface with laser Raman microscopy. Oper Dent (2003) 0.77

Effect of thermal cycling on enamel bond strength of single-step self-etch systems. Oper Dent (2006) 0.77

Fluoride releasing materials: their anti-cariogenic properties tested in in vitro caries models. Oper Dent (2004) 0.77

The effect of bleaching on the elastic modulus of bovine enamel. Dent Mater J (2007) 0.76

The dental pulp: inflammatory markers and vital bleaching. Am J Dent (2005) 0.76

In vitro induction of hydrolytic activity in human gingival and pulp fibroblasts by triethylene glycol dimethacrylate and monocyte chemotatic protein-1. Dent Mater (2008) 0.76

In vivo kinetics of bleaching gel with three-percent hydrogen peroxide within the first hour. Oper Dent (2003) 0.76

Biodegradation of a dental resin material by fibroblast conditioned media. Dent Mater (2009) 0.75

An in vitro evaluation of the contents of root canals obturated with gutta percha and AH-26 sealer or Resilon and Epiphany sealer. J Endod (2007) 0.75

Gratitude and the academy. Oper Dent (2012) 0.75

Influence of light activation on the volumetric change of core foundation resins. Oper Dent (2005) 0.75

Characterization of a novel light-cured star-shape poly(acrylic acid)-composed glass-ionomer cement: fluoride release, water sorption, shrinkage, and hygroscopic expansion. Eur J Oral Sci (2009) 0.75

Quantitative comparison of the water permeable zone among four types of dental adhesives used with a dual-cured composite. Oper Dent (2006) 0.75

The second mouse. Oper Dent (2003) 0.75

Influence of NaOCl treatment of etched and dried dentin surface on bond strength and resin infiltration. Oper Dent (2005) 0.75

Effect of low O2-gas transmission rate barrier films on knoop hardness and toothbrush abrasion of resin cements. Am J Dent (2006) 0.75

Art and science. Oper Dent (2007) 0.75

Fracture resistance and fracture resistance after fatigue loading of 4 different post and cores in endodontically treated teeth. Compend Contin Educ Dent (2006) 0.75

Influence of metal conditioner contamination of the dentin surface on bond strengths of dentin adhesive systems using self-etching primers. Oper Dent (2005) 0.75

Where have all the mentors gone? Oper Dent (2003) 0.75

Focus [editorial]. Oper Dent (2003) 0.75

Extra credit is "old school"--not! Oper Dent (2011) 0.75

Remembering the past, an eye to the future. Oper Dent (2010) 0.75

Effects of two combinations of triple antibiotic paste used in endodontic regeneration on root microhardness and chemical structure of radicular dentine. J Oral Sci (2014) 0.75

Influence of interchanging adhesive resins and self-etching primers on the mechanical properties of adhesive resins. Oper Dent (2004) 0.75

Trends. Oper Dent (2009) 0.75

What does it all really mean? Oper Dent (2004) 0.75

Influence of storage conditions of adhesive vials on dentin bond strength. Oper Dent (2010) 0.75

Operative dentistry: déjà vu, redux. Oper Dent (2004) 0.75

Influence of interchanging self-etching primers and bonding agents on bond strengths to bovine dentin. Am J Dent (2005) 0.75

Light curing explored in Halifax. Oper Dent (2014) 0.75

In vitro microleakage of four tracers with multiple applications to the same tooth. Oper Dent (2004) 0.75

Disinfection of bacterially contaminated hydrophilic PVS impression materials. J Prosthodont (2011) 0.75

New blood. Oper Dent (2014) 0.75

The art and evidence? Oper Dent (2010) 0.75

Influence of power density on polymerization behavior and bond strengths of dual-cured resin direct core foundation systems. Oper Dent (2009) 0.75

American Academy of Gold Foil Operators Distinguished Member Award. Dr Melvin R Lund. Oper Dent (2002) 0.75