Published in J Bone Joint Surg Br on May 01, 2004
Clinical trial and in-vitro study comparing the efficacy of treating bony lesions with allografts versus synthetic or highly-processed xenogeneic bone grafts. BMC Musculoskelet Disord (2016) 1.42
Modular tantalum augments for acetabular defects in revision hip arthroplasty. Clin Orthop Relat Res (2008) 1.32
Trabecular Metal cups for acetabular defects with 50% or less host bone contact. Clin Orthop Relat Res (2009) 1.27
Acetabular revision with metal mesh, impaction bone grafting, and a cemented cup. Clin Orthop Relat Res (2008) 1.19
Cost-effectiveness of total hip and knee replacements for the Australian population with osteoarthritis: discrete-event simulation model. PLoS One (2011) 1.19
The survival and fate of acetabular reconstruction with impaction grafting for large defects. Clin Orthop Relat Res (2010) 1.02
Favorable survival of acetabular reconstruction with bone impaction grafting in dysplastic hips. Clin Orthop Relat Res (2008) 0.94
Short-term survival of the trabecular metal cup is similar to that of standard cups used in acetabular revision surgery. Acta Orthop (2014) 0.93
Acetabular revision surgery with impacted bone allografts and cemented cups in patients younger than 55 years. Int Orthop (2008) 0.91
THA Revisions Using Impaction Allografting With Mesh Is Durable for Medial but Not Lateral Acetabular Defects. Clin Orthop Relat Res (2015) 0.84
Reconstruction of the rotation center of the hip after oblong cups in revision total hip arthroplasty. J Orthop Traumatol (2012) 0.82
Impregnation of bone chips with antibiotics and storage of antibiotics at different temperatures: an in vitro study. BMC Musculoskelet Disord (2010) 0.81
Use of porous tantalum components in Paprosky two and three acetabular revision. A minimum five-year follow-up of fifty one hips. Int Orthop (2016) 0.80
The first 50 years of total hip arthroplasty: lessons learned. Clin Orthop Relat Res (2008) 0.80
Prospective cohort study of six hundred and sixty four revisions of loose failed acetabular implants. Int Orthop (2014) 0.75
Long term results of impaction Bone grafting using a synthetic graft (Apapore) in revision hip surgery. J Orthop (2017) 0.75
Biological effects of rinsing morsellised bone grafts before and after impaction. Int Orthop (2008) 0.75
Early results of whole femoral head allograft with articular cartilage for acetabular impaction grafting in revision hip replacements. Ann R Coll Surg Engl (2010) 0.75
Impaction grafted bone chip size effect on initial stability in an acetabular model: Mechanical evaluation. J Orthop (2013) 0.75
[Acetabular reconstruction in total hip replacement]. Pan Afr Med J (2015) 0.75
Bone grafts, bone graft extenders, substitutes and enhancers for acetabular reconstruction in revision total hip arthroplasty. EFORT Open Rev (2017) 0.75
Revision hip arthroplasty using impacted cancellous bone and cement: a long-term follow-up study. Eur J Orthop Surg Traumatol (2015) 0.75
[An asymmetrical face due to torticollis in two young children]. Ned Tijdschr Geneeskd (2006) 2.66
Tissue engineering of the meniscus. Biomaterials (2004) 1.56
Experimental versus computational analysis of micromotions at the implant-bone interface. Proc Inst Mech Eng H (2011) 1.44
How to quantify knee function after total knee arthroplasty? Knee (2008) 1.29
Rotational malalignment after intramedullary nailing of femoral fractures. J Orthop Trauma (2004) 1.26
Modelling the fibrous tissue layer in cemented hip replacements: experimental and finite element methods. J Biomech (2004) 1.12
Survival of massive allografts in segmental oncological bone defect reconstructions. Int Orthop (2008) 1.10
Migration, stem shape, and surface finish in cemented total hip arthroplasty. Clin Orthop Relat Res (1998) 1.10
Acetabular revision with impacted morsellised cancellous bone grafting and a cemented acetabular component: a 20- to 25-year follow-up. J Bone Joint Surg Br (2009) 1.07
Design, synthesis and properties of a degradable polyurethane scaffold for meniscus regeneration. J Mater Sci Mater Med (2004) 1.04
Finite element and experimental models of cemented hip joint reconstructions can produce similar bone and cement strains in pre-clinical tests. J Biomech (2002) 1.04
[Favourable long-term results from cemented total hip arthroplasty combined with acetabular bone impaction grafting in patients under the age of 50]. Ned Tijdschr Geneeskd (2007) 1.01
[Complications within two years after revision of total hip prostheses]. Ned Tijdschr Geneeskd (2007) 1.01
Femoral bone loss in total knee arthroplasty. A review. Acta Orthop Belg (1999) 1.00
[Choice of hip prosthesis in patients younger than 50 years]. Ned Tijdschr Geneeskd (2007) 0.98
Computed tomography determined femoral torsion is not accurate. Arch Orthop Trauma Surg (2004) 0.98
Mechanical characteristics of impacted morsellised bone grafts used in revision of total hip arthroplasty. J Bone Joint Surg Br (1999) 0.96
Aneurysmal bone cyst: the role of cryosurgery as local adjuvant treatment. J Surg Oncol (2009) 0.95
Hip-joint and abductor-muscle forces adequately represent in vivo loading of a cemented total hip reconstruction. J Biomech (2001) 0.95
Oncological and functional results of cryosurgical therapy of enchondromas and chondrosarcomas grade 1. J Surg Oncol (2008) 0.93
The assessment of the risk of fracture in femora with metastatic lesions: comparing case-specific finite element analyses with predictions by clinical experts. J Bone Joint Surg Br (2012) 0.93
Avoiding rotational malalignment after fractures of the femur by using the profile of the lesser trochanter: an in vitro study. Arch Orthop Trauma Surg (2005) 0.93
Mixed-mode failure strength of implant-cement interface specimens with varying surface roughness. J Biomech (2010) 0.92
Meniscal replacement in dogs. Tissue regeneration in two different materials with similar properties. J Biomed Mater Res B Appl Biomater (2006) 0.92
In vivo knee laxity in flexion and extension: a radiographic study in 30 older healthy subjects. Knee (2007) 0.91
Displacement of the medial meniscus within the passive motion characteristics of the human knee joint: an RSA study in human cadaver knees. Knee Surg Sports Traumatol Arthrosc (2004) 0.90
Frictional heating of total hip implants. Part 1: measurements in patients. J Biomech (2001) 0.89
Autologous morsellised bone grafting restores uncontained femoral bone defects in knee arthroplasty. An in vivo study in horses. J Bone Joint Surg Br (2000) 0.89
Sugioka's osteotomy for femoral-head necrosis in young Caucasians. Int Orthop (2005) 0.89
Finite-element analysis of failure of the Capital Hip designs. J Bone Joint Surg Br (2005) 0.89
Favorable results of acetabular reconstruction with impacted morsellized bone grafts in patients younger than 50 years: a 10- to 18-year follow-up study of 34 cemented total hip arthroplasties. Acta Orthop Scand (2001) 0.89
The trochlea is bilinear and oriented medially. Clin Orthop Relat Res (2003) 0.88
Thigh-calf contact: does it affect the loading of the knee in the high-flexion range? J Biomech (2009) 0.88
Acetabular reconstruction with impacted morcellized cancellous bone autograft and cemented primary total hip arthroplasty: a 10- to 17-year follow-up study. J Arthroplasty (2000) 0.87
A mechanical comparison of high-flexion and conventional total knee arthroplasty. Proc Inst Mech Eng H (2008) 0.87
The management of clear cell sarcoma. Eur J Surg Oncol (2003) 0.87
A comparison of fatigue resistance of three materials for cusp-replacing adhesive restorations. J Dent (2005) 0.87
Distal femoral bone mineral density after total knee arthroplasty: a comparison with general bone mineral density. Arch Orthop Trauma Surg (2001) 0.87
Numerical analysis of variations in posterior cruciate ligament properties and balancing techniques on total knee arthroplasty loading. Med Eng Phys (2010) 0.87
Frictional heating of total hip implants. Part 2: finite element study. J Biomech (2001) 0.86
Functional evaluation of the TKA patient using the coordination and variability of rising. J Electromyogr Kinesiol (2006) 0.86
The difference in trochlear orientation between the natural knee and current prosthetic knee designs; towards a truly physiological prosthetic groove orientation. J Biomech (2005) 0.86
Pseudo-arthrosis repair of a posterior cruciate ligament avulsion fracture. Knee Surg Sports Traumatol Arthrosc (2010) 0.86
The role of femoral stem extension in total knee arthroplasty. Clin Orthop Relat Res (2000) 0.85
Compensation for rotational malalignment after intramedullary nailing for femoral shaft fractures. An analysis by plantar pressure measurements during gait. Injury (2004) 0.85
Thigh-calf contact force measurements in deep knee flexion. Clin Biomech (Bristol, Avon) (2007) 0.85
Acetabular defect reconstruction with impacted morsellized bone grafts or TCP/HA particles. A study on the mechanical stability of cemented cups in an artificial acetabulum model. Biomaterials (2002) 0.84
Why would cement porosity reduction be clinically irrelevant, while experimental data show the contrary. J Orthop Res (2005) 0.84
Basic science of bone impaction grafting. Instr Course Lect (2001) 0.84
Technical factors affecting cup stability in bone impaction grafting. Proc Inst Mech Eng H (2007) 0.84
A three-dimensional finite element model of the polymerization process in dental restorations. Biomaterials (2003) 0.83
Prosthetic replacement of the medial meniscus in cadaveric knees: does the prosthesis mimic the functional behavior of the native meniscus? Am J Sports Med (2004) 0.83
Chemotherapy affects the pattern of failure after shear loading of the proximal tibial growth plate. Arch Orthop Trauma Surg (2004) 0.83
Experimental investigation of bone remodelling using composite femurs. Clin Biomech (Bristol, Avon) (2003) 0.83
The initial stability of cemented acetabular cups can be augmented by mixing morsellized bone grafts with tricalciumphosphate/hydroxyapatite particles in bone impaction grafting. J Arthroplasty (2003) 0.83
Sensitivity of subject-specific models to errors in musculo-skeletal geometry. J Biomech (2012) 0.83
Diagnostic criteria of traumatic central cord syndrome. Part 1: a systematic review of clinical descriptors and scores. Spinal Cord (2010) 0.83
Diagnostic criteria of traumatic central cord syndrome. Part 2: a questionnaire survey among spine specialists. Spinal Cord (2010) 0.82
A comparative finite-element analysis of bone failure and load transfer of osseointegrated prostheses fixations. Ann Biomed Eng (2010) 0.82
Acetabular revision with impacted freeze-dried cancellous bone chips and a cemented cup: a report of 7 cases at 5 to 9 years' follow-up. J Arthroplasty (2001) 0.82
Simulated bone remodeling around two types of osseointegrated implants for direct fixation of upper-leg prostheses. J Mech Behav Biomed Mater (2012) 0.81
A medium throughput device to study the effects of combinations of surface strains and fluid-flow shear stresses on cells. Lab Chip (2015) 0.81
Can internal stresses explain the fracture resistance of cusp-replacing composite restorations? Eur J Oral Sci (2005) 0.81
Morsellized bone grafting compensates for femoral bone loss in revision total knee arthroplasty. An experimental study. Biomaterials (1999) 0.81
Cemented cup stability during lever-out testing after acetabular bone impaction grafting with bone graft substitutes mixes containing morselized cancellous bone and tricalcium phosphate--hydroxyapatite granules. Proc Inst Mech Eng H (2005) 0.81
BMP-7 stimulates early diaphyseal fracture healing in estrogen deficient rats. J Orthop Res (2011) 0.81
The Ilizarov external fixator: what remains of the wire pretension after dynamic loading? Clin Biomech (Bristol, Avon) (2005) 0.81
A porous polymer scaffold for meniscal lesion repair--a study in dogs. Biomaterials (2003) 0.80
A three-dimensional dynamic finite element model of the prosthetic knee joint: simulation of joint laxity and kinematics. Proc Inst Mech Eng H (2005) 0.80
Modeling mechanical signals on the surface of µCT and CAD based rapid prototype scaffold models to predict (early stage) tissue development. Biotechnol Bioeng (2014) 0.80
A combined finite element method and continuum damage mechanics approach to simulate the in vitro fatigue behavior of human cortical bone. J Mater Sci Mater Med (1999) 0.80
Biomechanical analysis of posterior cruciate ligament retaining high-flexion total knee arthroplasty. Clin Biomech (Bristol, Avon) (2009) 0.80
The medium-term results of the cemented Exeter femoral component in patients under 40 years of age. J Bone Joint Surg Br (2008) 0.80
Chondrosarcoma of bone: functional outcome and quality of life. J Surg Oncol (2002) 0.79
Numerical analysis of an osseointegrated prosthesis fixation with reduced bone failure risk and periprosthetic bone loss. J Biomech (2012) 0.79
Impactability and time-dependent mechanical properties of porous titanium particles for application in impaction grafting. J Biomed Mater Res B Appl Biomater (2010) 0.79
Presence and mechanism of knee articular cartilage degeneration after meniscal reconstruction in dogs. Osteoarthritis Cartilage (2003) 0.79
Total hip arthroplasty for primary osteoarthroses in younger patients in the Finnish arthroplasty register. Acta Orthop (2005) 0.79
Is hydroxyapatite cement an alternative for allograft bone chips in bone grafting procedures? A mechanical and histological study in a rabbit cancellous bone defect model. J Biomed Mater Res B Appl Biomater (2004) 0.79
Effect of load on the early incorporation of impacted morsellized allografts. Biomaterials (2002) 0.79
Physical examination and in vivo kinematics in two posterior cruciate ligament retaining total knee arthroplasty designs. Knee (2009) 0.79
Mechanical testing of impaction bone grafting in the tibia: initial stability and design of the stem. J Bone Joint Surg Br (2005) 0.79
Bone ingrowth potential of electron beam and selective laser melting produced trabecular-like implant surfaces with and without a biomimetic coating. J Mater Sci Mater Med (2012) 0.78
Influence of preparation techniques to the strength of the bone-cement interface behind the flange in total knee arthroplasty. Knee (2012) 0.78
Prevention of mesh-dependent damage growth in finite element simulations of crack formation in acrylic bone cement. J Biomech (2003) 0.78
The stability of the femoral component of a minimal invasive total hip replacement system. Proc Inst Mech Eng H (2006) 0.78
Densitometry test of bone tissue: validation of computer simulation studies. Comput Biol Med (2008) 0.78
Does layering minimize shrinkage stresses in composite restorations? J Dent Res (2003) 0.77
Acetabular reconstruction with bone impaction grafting: 20 years of experience. Instr Course Lect (2001) 0.77
Finite element analysis of the long-term fixation strength of cemented ceramic cups. Proc Inst Mech Eng H (2006) 0.77