Published in Biomaterials on January 01, 2005
Scaffold-free vascular tissue engineering using bioprinting. Biomaterials (2009) 2.32
Engineering hydrogels as extracellular matrix mimics. Nanomedicine (Lond) (2010) 1.86
Recent advances in 3D printing of biomaterials. J Biol Eng (2015) 1.54
Tissue engineering by self-assembly and bio-printing of living cells. Biofabrication (2010) 1.48
Bioprinting for stem cell research. Trends Biotechnol (2012) 1.46
Three-dimensional fabrication at small size scales. Small (2010) 1.31
Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies. J Biomed Mater Res B Appl Biomater (2011) 1.16
Polymeric aqueous biphasic systems for non-contact cell printing on cells: engineering heterocellular embryonic stem cell niches. Adv Mater (2010) 1.15
3D biofabrication strategies for tissue engineering and regenerative medicine. Annu Rev Biomed Eng (2014) 1.12
Block-Cell-Printing for live single-cell printing. Proc Natl Acad Sci U S A (2014) 1.09
Emerging technologies for assembly of microscale hydrogels. Adv Healthc Mater (2012) 1.06
Osteoinduction and survival of osteoblasts and bone-marrow stromal cells in 3D biphasic calcium phosphate scaffolds under static and dynamic culture conditions. J Cell Mol Med (2012) 1.05
Microfluidic techniques for development of 3D vascularized tissue. Biomaterials (2014) 1.02
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels. Biofabrication (2014) 1.02
High-density, multiplexed patterning of cells at single-cell resolution for tissue engineering and other applications. Angew Chem Int Ed Engl (2011) 1.01
3D bioprinting for engineering complex tissues. Biotechnol Adv (2015) 0.97
Electrohydrodynamic jetting of mouse neuronal cells. Biochem J (2006) 0.97
Tissue engineering: current strategies and future directions. Chonnam Med J (2011) 0.96
Design and fabrication of human skin by three-dimensional bioprinting. Tissue Eng Part C Methods (2013) 0.96
Three-dimensional cell and tissue patterning in a strained fibrin gel system. PLoS One (2007) 0.96
Printing multistrain bacterial patterns with a piezoelectric inkjet printer. PLoS One (2007) 0.95
Control of Retinal Ganglion Cell Positioning and Neurite Growth: Combining 3D Printing with Radial Electrospun Scaffolds. Tissue Eng Part A (2016) 0.90
Microbial whole-cell arrays. Microb Biotechnol (2008) 0.90
New approach to a practical quartz crystal microbalance sensor utilizing an inkjet printing system. Sensors (Basel) (2014) 0.90
Evaluation of cell viability and functionality in vessel-like bioprintable cell-laden tubular channels. J Biomech Eng (2013) 0.86
Strategic design and fabrication of engineered scaffolds for articular cartilage repair. J Funct Biomater (2012) 0.85
Aqueous biphasic microprinting approach to tissue engineering. Biomicrofluidics (2011) 0.85
Laser printing of three-dimensional multicellular arrays for studies of cell-cell and cell-environment interactions. Tissue Eng Part C Methods (2011) 0.85
Non-positional cell microarray prepared by shape-coded polymeric microboards: A new microarray format for multiplex and high throughput cell-based assays. Biomicrofluidics (2011) 0.85
Controlled Positioning of Cells in Biomaterials-Approaches Towards 3D Tissue Printing. J Funct Biomater (2011) 0.85
Use of Adult Stem Cells for Cartilage Tissue Engineering: Current Status and Future Developments. Stem Cells Int (2015) 0.83
Printing cancer cells into intact microvascular networks: a model for investigating cancer cell dynamics during angiogenesis. Integr Biol (Camb) (2015) 0.81
Fabrication and characterization of bio-engineered cardiac pseudo tissues. Biofabrication (2009) 0.81
Engineering cancer microenvironments for in vitro 3-D tumor models. Mater Today (Kidlington) (2015) 0.81
Recent advances in bioprinting techniques: approaches, applications and future prospects. J Transl Med (2016) 0.80
Generation of Multi-Scale Vascular Network System within 3D Hydrogel using 3D Bio-Printing Technology. Cell Mol Bioeng (2014) 0.80
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing. Sci Technol Adv Mater (2015) 0.80
Microfluidics-based laser cell-micropatterning system. Biofabrication (2014) 0.79
Generation of controllable gradients in cell density. Angew Chem Int Ed Engl (2012) 0.79
Solid Free-form Fabrication Technology and Its Application to Bone Tissue Engineering. Int J Stem Cells (2010) 0.79
Microfluidic impact printer with interchangeable cartridges for versatile non-contact multiplexed micropatterning. Lab Chip (2013) 0.79
A platform for high-throughput bioenergy production phenotype characterization in single cells. Sci Rep (2017) 0.77
Living Cell Microarrays: An Overview of Concepts. Microarrays (Basel) (2016) 0.77
3D Bioprinting for Vascularized Tissue Fabrication. Ann Biomed Eng (2016) 0.77
Direct assembling methodologies for high-throughput bioscreening. Biotechnol J (2011) 0.77
Manipulating the microvasculature and its microenvironment. Crit Rev Biomed Eng (2013) 0.76
Epithelial machines of morphogenesis and their potential application in organ assembly and tissue engineering. Biomech Model Mechanobiol (2012) 0.76
Printing of Three-Dimensional Tissue Analogs for Regenerative Medicine. Ann Biomed Eng (2016) 0.76
Involvement of flocculin in negative potential-applied ITO electrode adhesion of yeast cells. FEMS Yeast Res (2015) 0.75
Cell-microenvironment interactions and architectures in microvascular systems. Biotechnol Adv (2016) 0.75
Influence of cell printing on biological characters of chondrocytes. Int J Clin Exp Med (2015) 0.75
Recent Advances in Genetic Technique of Microbial Report Cells and Their Applications in Cell Arrays. Biomed Res Int (2015) 0.75
Solid organ fabrication: comparison of decellularization to 3D bioprinting. Biomater Res (2016) 0.75
An improved procedure for subcellular spatial alignment during live-cell CLEM. PLoS One (2014) 0.75
Assembly of cells and vesicles for organ engineering. Sci Technol Adv Mater (2011) 0.75
Analysis of multiple types of human cells subsequent to bioprinting with electrospraying technology. Biomed Rep (2016) 0.75
Surface acoustic waves induced micropatterning of cells in gelatin methacryloyl (GelMA) hydrogels. Biofabrication (2017) 0.75
Three-dimensional bio-printing: A new frontier in oncology research. World J Clin Oncol (2017) 0.75
New ways to print living cells promise breakthroughs for engineering complex tissues in vitro. Biochem J (2006) 0.75
Picoliter-volume inkjet printing into planar microdevice reservoirs for low-waste, high-capacity drug loading. Bioeng Transl Med (2017) 0.75
Drop-on-demand inkjet-based cell printing with 30-μm nozzle diameter for cell-level accuracy. Biomicrofluidics (2016) 0.75
Three-dimensional printing of the retina. Curr Opin Ophthalmol (2016) 0.75
Microfabricated tissues for investigating traction forces involved in cell migration and tissue morphogenesis. Cell Mol Life Sci (2016) 0.75
A lectin-based cell microarray approach to analyze the mammalian granulosa cell surface glycosylation profile. Glycoconj J (2016) 0.75
High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing. Sci Rep (2017) 0.75
3D-Printed pHEMA Materials for Topographical and Biochemical Modulation of Dorsal Root Ganglion Cell Response. ACS Appl Mater Interfaces (2017) 0.75
3D Printing of Organs-On-Chips. Bioengineering (Basel) (2017) 0.75
Organ printing: computer-aided jet-based 3D tissue engineering. Trends Biotechnol (2003) 2.66
Human microvasculature fabrication using thermal inkjet printing technology. Biomaterials (2009) 1.55
Viability and electrophysiology of neural cell structures generated by the inkjet printing method. Biomaterials (2006) 1.42
Thermal inkjet printing in tissue engineering and regenerative medicine. Recent Pat Drug Deliv Formul (2012) 1.26
Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells. Biotechnol Bioeng (2010) 1.18
Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography. Tissue Eng (2004) 1.15
Cell and organ printing 1: protein and cell printers. Anat Rec A Discov Mol Cell Evol Biol (2003) 1.13
Long-term culture of embryonic rat cardiomyocytes on an organosilane surface in a serum-free medium. Biomaterials (2004) 1.12
Adult rat spinal cord culture on an organosilane surface in a novel serum-free medium. In Vitro Cell Dev Biol Anim (2006) 1.08
Electrophysiological characterization of embryonic hippocampal neurons cultured in a 3D collagen hydrogel. Biomaterials (2009) 1.06
Construction of high-density bacterial colony arrays and patterns by the ink-jet method. Biotechnol Bioeng (2004) 0.97
Frictional properties of poly(MPC-co-BMA) phospholipid polymer for catheter applications. Biomaterials (2003) 0.96
Biofabrication: reappraising the definition of an evolving field. Biofabrication (2016) 0.94
Electrophysiological and immunocytochemical characterization of DRG neurons on an organosilane surface in serum-free medium. In Vitro Cell Dev Biol Anim (2008) 0.86
Advances in tissue engineering: cell printing. J Thorac Cardiovasc Surg (2005) 0.84
Minimally invasive tissue engineering composites and cell printing. IEEE Eng Med Biol Mag (2003) 0.84
Synthesis and characterization of biodegradable elastomeric polyurethane scaffolds fabricated by the inkjet technique. Biomaterials (2008) 0.84
The role of independently variable grafting density and layer thickness of polymer nanolayers on peptide adsorption and cell adhesion. Biomaterials (2006) 0.84
Loading dependent swelling and release properties of novel biodegradable, elastic and environmental stimuli-sensitive polyurethanes. J Control Release (2008) 0.82
Fabrication and characterization of bio-engineered cardiac pseudo tissues. Biofabrication (2009) 0.81
Design and implementation of a two-dimensional inkjet bioprinter. Conf Proc IEEE Eng Med Biol Soc (2009) 0.80
In vitro evaluation of phosphonylated low-density polyethylene for vascular applications. J Biomed Mater Res (2002) 0.80
Experimental and numerical modeling of variable friction between nanoregions in coventional and crosslinked UHMWPE. J Biomech Eng (2004) 0.78
In vivo assessment of printed microvasculature in a bilayer skin graft to treat full-thickness wounds. Tissue Eng Part A (2014) 0.77
Sensitivity and specificity of the AdenoPlus test for diagnosing adenoviral conjunctivitis. JAMA Ophthalmol (2013) 0.76
A quantitative approach to studying structures and orientation at self-assembled monolayer/fluid interfaces. J Colloid Interface Sci (2003) 0.75