Published in J Endod on August 01, 2004
Bond strength of different endodontic sealers to dentin: push-out test. J Appl Oral Sci (2012) 0.96
Efficacy of Three Different Methods in the Retreatment of Root Canals Filled with Resilon/Epiphany SE. Iran Endod J (2010) 0.87
Comparison of Antimicrobial Efficacy of IKI and NaOCl Irrigants in Infected Root Canals: An In Vivo Study. Iran Endod J (2010) 0.85
Effect of different irrigant activation protocols on push-out bond strength. Lasers Med Sci (2015) 0.79
Effect of retreatment on the push-out bond strength of MTA-based and epoxy resin-based endodontic sealers. J Dent Res Dent Clin Dent Prospects (2017) 0.75
Root Canal Irrigants and Dentin Bonding: An Update. Iran Endod J (2017) 0.75
Effect of different gutta-percha solvents on the microtensile bond strength of various adhesive systems to pulp chamber dentin. Clin Oral Investig (2016) 0.75
Dental adhesives of the future. J Adhes Dent (2002) 2.35
Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials (2005) 2.32
Water sorption/solubility of dental adhesive resins. Dent Mater (2006) 2.32
Have dentin adhesives become too hydrophilic? J Can Dent Assoc (2003) 2.00
Review of contemporary irrigant agitation techniques and devices. J Endod (2009) 1.99
Single-step adhesives are permeable membranes. J Dent (2003) 1.98
Changes in stiffness of demineralized dentin following application of collagen crosslinkers. J Biomed Mater Res B Appl Biomater (2008) 1.92
Guided tissue remineralisation of partially demineralised human dentine. Biomaterials (2007) 1.91
Geometric factors affecting dentin bonding in root canals: a theoretical modeling approach. J Endod (2005) 1.85
Reactivation of inactivated endogenous proteolytic activities in phosphoric acid-etched dentine by etch-and-rinse adhesives. Biomaterials (2006) 1.81
Monoblocks in root canals: a hypothetical or a tangible goal. J Endod (2007) 1.78
Calcium phosphate phase transformation produced by the interaction of the portland cement component of white mineral trioxide aggregate with a phosphate-containing fluid. J Endod (2007) 1.74
Microtensile bond strength between adhesive cements and root canal dentin. Dent Mater (2003) 1.71
Ultrastructural evaluation of the apical seal in roots filled with a polycaprolactone-based root canal filling material. J Endod (2005) 1.66
Water treeing--a potential mechanism for degradation of dentin adhesives. Am J Dent (2003) 1.63
Impact of the quality of coronal restoration versus the quality of root canal fillings on success of root canal treatment: a systematic review and meta-analysis. J Endod (2011) 1.63
Activation of gelatinolytic/collagenolytic activity in dentin by self-etching adhesives. Eur J Oral Sci (2006) 1.57
Chlorhexidine stabilizes the adhesive interface: a 2-year in vitro study. Dent Mater (2009) 1.55
Cysteine cathepsins in human dentin-pulp complex. J Endod (2010) 1.52
Adhesion of endodontic sealers to dentin and gutta-percha. J Endod (2002) 1.50
Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part I. Single-step self-etching adhesive. J Adhes Dent (2003) 1.47
A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials (2005) 1.44
Solvent and water retention in dental adhesive blends after evaporation. Biomaterials (2005) 1.39
Optimizing dentin bond durability: control of collagen degradation by matrix metalloproteinases and cysteine cathepsins. Dent Mater (2012) 1.39
Host-derived loss of dentin matrix stiffness associated with solubilization of collagen. J Biomed Mater Res B Appl Biomater (2009) 1.38
Effect of vapor lock on root canal debridement by using a side-vented needle for positive-pressure irrigant delivery. J Endod (2010) 1.37
Critical review on methacrylate resin-based root canal sealers. J Endod (2010) 1.32
Interfacial strength of Resilon and gutta-percha to intraradicular dentin. J Endod (2005) 1.29
Sealing properties of mineral trioxide aggregate orthograde apical plugs and root fillings in an in vitro apexification model. J Endod (2007) 1.28
The effect of chlorhexidine on dentin hybrid layers in vivo. Oper Dent (2007) 1.28
Use of a specific MMP-inhibitor (galardin) for preservation of hybrid layer. Dent Mater (2010) 1.27
Substantivity of chlorhexidine to human dentin. Dent Mater (2010) 1.25
Evaluation of the influence of smear layer on the apical and coronal sealing ability of two sealers. J Endod (2004) 1.23
In vitro antibacterial activities of root-canal sealers by using two different methods. J Endod (2004) 1.21
Strategies to prevent hydrolytic degradation of the hybrid layer-A review. Dent Mater (2013) 1.19
Evaluation of two post core systems using two different methods (fracture strength test and a finite elemental stress analysis). J Endod (2002) 1.19
Effects of mineral trioxide aggregate on cell survival, gene expression associated with mineralized tissues, and biomineralization of cementoblasts. J Endod (2009) 1.18
Evaluation of the effect of endodontic irrigation solutions on the microhardness and the roughness of root canal dentin. J Endod (2004) 1.17
Chlorhexidine binding to mineralized versus demineralized dentin powder. Dent Mater (2010) 1.17
Mineralisation of reconstituted collagen using polyvinylphosphonic acid/polyacrylic acid templating matrix protein analogues in the presence of calcium, phosphate and hydroxyl ions. Biomaterials (2010) 1.17
Setting properties and cytotoxicity evaluation of a premixed bioceramic root canal sealer. J Endod (2011) 1.17
Effect of medications for root canal treatment on bonding to root canal dentin. J Endod (2004) 1.16
Hierarchical and non-hierarchical mineralisation of collagen. Biomaterials (2010) 1.16
Chlorhexidine increases the longevity of in vivo resin-dentin bonds. Eur J Oral Sci (2010) 1.16
Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application. Am J Dent (2005) 1.15
Microtensile bond strength of total-etch and self-etching adhesives to caries-affected dentine. J Dent (2003) 1.15
Micropermeability of current self-etching and etch-and-rinse adhesives bonded to deep dentine: a comparison study using a double-staining/confocal microscopy technique. Eur J Oral Sci (2008) 1.15
Application of biologically-oriented dentin bonding principles to the use of endodontic irrigants. Am J Dent (2005) 1.14
Application of hydrophobic resin adhesives to acid-etched dentin with an alternative wet bonding technique. J Biomed Mater Res A (2008) 1.14
Shear bond strength of three resin based sealers to dentin with and without the smear layer. J Endod (2005) 1.14
Bonding of self-adhesive (self-etching) root canal sealers to radicular dentin. J Endod (2009) 1.14
Water content and apparent stiffness of non-caries versus caries-affected human dentin. J Biomed Mater Res B Appl Biomater (2005) 1.13
Water treeing in simplified dentin adhesives--déjà vu? Oper Dent (2005) 1.13
Effects of one versus two applications of an unfilled, all-in-one adhesive on dentine bonding. J Dent (2002) 1.12
Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part II. Single-bottle, total-etch adhesive. J Adhes Dent (2003) 1.12
Characterisation of resin-dentine interfaces by compressive cyclic loading. Biomaterials (2005) 1.12
How can nanoleakage occur in self-etching adhesive systems that demineralize and infiltrate simultaneously? J Adhes Dent (2002) 1.11
Effects of residual ethanol on the rate and degree of conversion of five experimental resins. Dent Mater (2008) 1.11
Self-etching adhesives increase collagenolytic activity in radicular dentin. J Endod (2006) 1.11
Microtensile dentin bond strength of self-etching resins: effect of a hydrophobic layer. Oper Dent (2005) 1.11
Effect of root resection on the apical sealing ability of mineral trioxide aggregate. Oral Surg Oral Med Oral Pathol Oral Radiol Endod (2003) 1.11
Effect of simulated pulpal pressure on dentin permeability and adhesion of self-etch adhesives. Dent Mater (2006) 1.10
A comparison of cohesive strength and stiffness of Resilon and gutta-percha. J Endod (2006) 1.10
Four applications of reinforced polyethylene fiber material in orthodontic practice. Am J Orthod Dentofacial Orthop (2002) 1.10
Effects of different exposure times and concentrations of sodium hypochlorite/ethylenediaminetetraacetic acid on the structural integrity of mineralized dentin. J Endod (2010) 1.10
A review of chemical-approach and ultramorphological studies on the development of fluoride-releasing dental adhesives comprising new pre-reacted glass ionomer (PRG) fillers. Dent Mater J (2008) 1.09
One-year stability of resin-dentin bonds created with a hydrophobic ethanol-wet bonding technique. Dent Mater (2010) 1.09
Effects of NaOCl on bond strengths of resin cements to root canal dentin. J Endod (2003) 1.09
Mechanical stability of resin-dentin bond components. Dent Mater (2005) 1.09
Infiltration/evaporation-induced shrinkage of demineralized dentin by solvated model adhesives. J Biomed Mater Res B Appl Biomater (2007) 1.09
Comparison of seal after obturation techniques using a polydimethylsiloxane-based root canal sealer. J Endod (2006) 1.09
Effects of ethanol addition on the water sorption/solubility and percent conversion of comonomers in model dental adhesives. Dent Mater (2009) 1.08
Effect of various endodontic irrigants on the push-out bond strength of biodentine and conventional root perforation repair materials. J Endod (2013) 1.08
Water sorption and solubility of methacrylate resin-based root canal sealers. J Endod (2007) 1.07
Durability of bonds and clinical success of adhesive restorations. Dent Mater (2012) 1.06
Functional biomimetic analogs help remineralize apatite-depleted demineralized resin-infiltrated dentin via a bottom-up approach. Acta Biomater (2010) 1.06
The requirement of zinc and calcium ions for functional MMP activity in demineralized dentin matrices. Dent Mater (2010) 1.06
Resin bonding to cervical sclerotic dentin: a review. J Dent (2004) 1.06
Two-photon laser confocal microscopy of micropermeability of resin-dentin bonds made with water or ethanol wet bonding. J Biomed Mater Res B Appl Biomater (2009) 1.06
Evaluation of the quality of the apical seal in Resilon/Epiphany and Gutta-Percha/AH Plus-filled root canals by using a fluid filtration approach. J Endod (2007) 1.06
Immunohistochemical identification of MMP-2 and MMP-9 in human dentin: correlative FEI-SEM/TEM analysis. J Biomed Mater Res A (2009) 1.06
Bond strength between root dentin and three glass-fiber post systems. J Prosthet Dent (2006) 1.05
Ultimate tensile strength of dentin: Evidence for a damage mechanics approach to dentin failure. J Biomed Mater Res (2002) 1.05
Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers. J Adhes Dent (2003) 1.04
Effectiveness of resin-coated gutta-percha cones and a dual-cured, hydrophilic methacrylate resin-based sealer in obturating root canals. J Endod (2005) 1.03
The effect of two different root canal sealers and smear layer on resistance to root fracture. J Endod (2002) 1.02
The inhibitory effect of polyvinylphosphonic acid on functional matrix metalloproteinase activities in human demineralized dentin. Acta Biomater (2010) 1.02
Degradation of resin-bonded human dentin after 3 years of storage. Am J Dent (2007) 1.02
The anti-MMP activity of benzalkonium chloride. J Dent (2010) 1.02
Effects of multiple coatings of two all-in-one adhesives on dentin bonding. J Adhes Dent (2005) 1.02
An in vitro assessment of the sealing ability of resilon/epiphany using fluid filtration. J Endod (2006) 1.01
Nanoleakage within the hybrid layer: a correlative FEISEM/TEM investigation. J Biomed Mater Res B Appl Biomater (2005) 1.01
Immunohistochemical and biochemical assay of MMP-3 in human dentine. J Dent (2011) 1.01
Efficacy of two contemporary single-cone filling techniques in preventing bacterial leakage. J Endod (2007) 1.00
Susceptibility of a polycaprolactone-based root canal filling material to degradation. II. Gravimetric evaluation of enzymatic hydrolysis. J Endod (2005) 1.00
Net expansion of dried demineralized dentin matrix produced by monomer/alcohol saturation and solvent evaporation. J Biomed Mater Res A (2006) 1.00
Effect of resin hydrophilicity and temperature on water sorption of dental adhesive resins. Biomaterials (2005) 1.00
Effect of 2% chlorhexidine digluconate on the bond strength to normal versus caries-affected dentin. Oper Dent (2009) 1.00
Effects of multiple adhesive coatings on dentin bonding. Oper Dent (2004) 0.99
Mapping of tooth deformation caused by moisture change using moiré interferometry. Dent Mater (2003) 0.99