Published in J Adhes Dent on April 01, 2006
Comparative evaluation of effects of different surface treatment methods on bond strength between fiber post and composite core. J Adv Prosthodont (2012) 0.86
Effects of post surface conditioning before silanization on bond strength between fiber post and resin cement. J Adv Prosthodont (2013) 0.82
Effect of antioxidants on push-out bond strength of hydrogen peroxide treated glass fiber posts bonded with two types of resin cement. Restor Dent Endod (2014) 0.78
The effect of post surface treatments on the bond strength of fiber posts to root surfaces. Lasers Med Sci (2012) 0.78
A simplified etching technique to improve the adhesion of fiber post. J Adv Prosthodont (2014) 0.77
Bonding effectiveness of two adhesive luting cements to glass fiber posts: pull-out evaluation of three different post surface conditioning methods. Int J Dent (2014) 0.75
An In vitro Evaluation of the Effect of Four Dentin Bonding System on the Bond Strength between Quartz Fiber Post and Composite Core. J Dent (Shiraz) (2014) 0.75
Effect of surface treatments on the flexural properties and adhesion of glass fiber-reinforced composite post to self-adhesive luting agent and radicular dentin. Odontology (2014) 0.75
Effects of post surface treatments including Er:YAG laser with different parameters on the pull-out bond strength of the fiber posts. Lasers Med Sci (2013) 0.75
Effect of Er:YAG laser pretreatment on bond strength of a composite core build-up material to fiber posts. Lasers Med Sci (2013) 0.75
Bond strength of two resin cements on dentin using different cementation strategies. J Esthet Restor Dent (2010) 1.43
Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions. Dent Mater (2006) 1.21
Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning. Dent Mater (2005) 1.20
Effect of airborne-particle abrasion and mechanico-thermal cycling on the flexural strength of glass ceramic fused to gold or cobalt-chromium alloy. J Prosthodont (2011) 1.09
Surgical and clinical management of a patient with Glanzmann thrombasthenia: a case report. Quintessence Int (2004) 1.09
Bond strength durability of a resin composite on a reinforced ceramic using various repair systems. Dent Mater (2009) 1.03
Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines, and luting agents: an in vitro evaluation. J Prosthet Dent (2004) 1.02
Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions. Dent Mater (2006) 0.99
Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning. J Adhes Dent (2006) 0.95
Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions. J Biomed Mater Res B Appl Biomater (2008) 0.95
Microtensile bond strength of a resin cement to silica-coated and silanized In-Ceram Zirconia before and after aging. Int J Prosthodont (2007) 0.94
Microtensile bond strength of a repair composite to leucite-reinforced feldspathic ceramic. Braz Dent J (2007) 0.94
Influence of different surface conditioning protocols on microtensile bond strength of self-adhesive resin cements to dentin. J Prosthet Dent (2011) 0.92
Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic. J Prosthet Dent (2006) 0.91
Bond strength durability of self-etching adhesives and resin cements to dentin. J Appl Oral Sci (2009) 0.91
Repair bond strength of microhybrid, nanohybrid and nanofilled resin composites: effect of substrate resin type, surface conditioning and ageing. Clin Oral Investig (2012) 0.90
Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system. J Prosthodont (2011) 0.90
Implant-abutment gap versus microbial colonization: Clinical significance based on a literature review. J Biomed Mater Res B Appl Biomater (2013) 0.89
Surface degradation of glass ceramics after exposure to acidulated phosphate fluoride. J Appl Oral Sci (2010) 0.87
Evaluation of the flexural strength of carbon fiber-, quartz fiber-, and glass fiber-based posts. J Endod (2005) 0.87
The effect of porcelain thickness and surface liner application on the fracture behavior of a ceramic system. Dent Mater (2011) 0.87
Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy. J Prosthodont (2010) 0.86
Surface roughness and bacterial adherence to resin composites and ceramics. Oral Health Prev Dent (2009) 0.86
Effect of mechanical cycling on the push-out bond strength of fiber posts adhesively bonded to human root dentin. Oper Dent (2007) 0.85
Bond strength durability of direct and indirect composite systems following surface conditioning for repair. J Adhes Dent (2007) 0.84
Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures. J Prosthet Dent (2004) 0.84
Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic. J Biomed Mater Res B Appl Biomater (2010) 0.83
Effect of post-silanization heat treatments of silanized feldspathic ceramic on adhesion to resin cement. J Adhes Dent (2013) 0.82
Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols. Dent Mater (2011) 0.82
Silica-based nano-coating on zirconia surfaces using reactive magnetron sputtering: effect on chemical adhesion of resin cements. J Adhes Dent (2013) 0.81
Effect of sodium ascorbate and the time lapse before cementation after internal bleaching on bond strength between dentin and ceramic. J Prosthodont (2010) 0.81
The adhesive system and root canal region do not influence the degree of conversion of dual resin cement. J Appl Oral Sci (2010) 0.81
Evaluation of light transmission through translucent and opaque posts. Oper Dent (2008) 0.81
In vitro evaluation of the precision of working casts for implant-supported restoration with multiple abutments. J Appl Oral Sci (2007) 0.81
Impression technique for ovate pontics. J Prosthet Dent (2011) 0.81
Fatigue resistance of bovine teeth restored with resin-bonded fiber posts: effect of post surface conditioning. Gen Dent (2008) 0.81
Adhesive quality of self-adhesive and conventional adhesive resin cement to Y-TZP ceramic before and after aging conditions. Oper Dent (2010) 0.80
Repair bond strength of a resin composite to alumina-reinforced feldspathic ceramic. Int J Prosthodont (2006) 0.80
Bonding to densely sintered alumina- and glass infiltrated aluminum / zirconium-based ceramics. J Appl Oral Sci (2005) 0.80
Hardening of a dual-cure resin cement using QTH and LED curing units. J Appl Oral Sci (2010) 0.80
Effect of brushing with conventional versus whitening dentifrices on surface roughness and biofilm formation of dental ceramics. Gen Dent (2012) 0.79
Effect of cast rectifiers on the marginal fit of UCLA abutments. J Appl Oral Sci (2007) 0.79
Durability of adhesion between feldspathic ceramic and resin cements: effect of adhesive resin, polymerization mode of resin cement, and aging. J Prosthodont (2013) 0.79
Composite resin to yttria stabilized tetragonal zirconia polycrystal bonding: comparison of repair methods. Oper Dent (2012) 0.79
Effect of surface conditioning modalities on the repair bond strength of resin composite to the zirconia core / veneering ceramic complex. J Adhes Dent (2013) 0.78
Adhesive cementation of zirconia posts to root dentin: evaluation of the mechanical cycling effect. Braz Oral Res (2008) 0.78
Effect of thermocycling on the bond strength of a glass-infiltrated ceramic and a resin luting cement. J Appl Oral Sci (2003) 0.78
Influence of thermal and mechanical cycling on the flexural strength of ceramics with titanium or gold alloy frameworks. Dent Mater (2007) 0.78
Effect of mechanical cycling on the flexural strength of densely sintered ceramics. Dent Mater (2006) 0.77
The influence of different screw tightening forces on the vertical misfit of implant-supported frameworks. J Appl Oral Sci (2005) 0.77
Effect of seating forces on cement-ceramic adhesion in microtensile bond tests. Clin Oral Investig (2012) 0.77
The influence of cutting speed and cutting initiation location in specimen preparation for the microtensile bond strength test. J Adhes Dent (2011) 0.77
Effect of silica coating on flexural strength of fiber posts. Int J Prosthodont (2006) 0.77
A new device in immediately loaded implant treatment in the edentulous mandible. Int J Oral Maxillofac Implants (2006) 0.77
Failure Probability of Three Designs of Zirconia Crowns. Int J Periodontics Restorative Dent (2015) 0.77
Effect of the layering technique on bond strength and cohesive resistance of a porcelain-zirconia system. J Adhes Dent (2014) 0.77
Influence of insertion techniques for resin cement and mechanical cycling on the bond strength between fiber posts and root dentin. J Adhes Dent (2015) 0.77
Bond strength of different resin cement and ceramic shades bonded to dentin. J Adhes Dent (2013) 0.77
The Impact of Conical and Nonconical Abutments on Bacterial Infiltration at the Implant-Abutment Interface. Int J Periodontics Restorative Dent (2016) 0.77
Comparison of resin push-out strength to root dentin of bovine- and human-teeth. Indian J Dent Res (2009) 0.76
Durability of microtensile bond to nonetched and etched feldspar ceramic: self-adhesive resin cements vs conventional resin. J Adhes Dent (2011) 0.76
Resin bonding to root canal dentin: effect of the application of an experimental hydrophobic resin coating after an all-in-one adhesive. J Contemp Dent Pract (2008) 0.76
Pressable feldspathic inlays in premolars: effect of cementation strategy and mechanical cycling on the adhesive bond between dentin and restoration. J Adhes Dent (2014) 0.76
Adherence of Streptococcus mutans to uncoated and saliva-coated glass-ceramics and composites. Gen Dent (2008) 0.76
Study of thermocycling effect on the bond strength between an aluminous ceramic and a resin cement. J Appl Oral Sci (2005) 0.76
Effect of resin cement type on the microtensile bond strength to lithium disilicate ceramic and dentin using different test assemblies. J Adhes Dent (2013) 0.75
Adhesives with different pHs: effect on the MTBS of chemically activated and light-activated composites to human dentin. J Appl Oral Sci (2007) 0.75
Improved adhesion of Y-TZP ceramics: a novel approach for surface modification. Gen Dent (2014) 0.75
[Bonding agent influence on shear bond strength of titanium/polyglass interface]. J Appl Oral Sci (2003) 0.75
[Effect of surface treatment of a glass-infiltrated alumina ceramic on the microtensile bond strength]. J Appl Oral Sci (2003) 0.75
Marginal and internal discrepancies of zirconia copings: effects of milling system and finish line design. Indian J Dent Res (2015) 0.75
Finite element analysis of the influence of geometry and design of zirconia crowns on stress distribution. J Prosthodont (2014) 0.75
Strength of a feldspar ceramic according to the thickness and polymerization mode of the resin cement coating. Dent Mater J (2011) 0.75
Influence of the coloring agent concentration on bleaching gel and pulp chamber temperatures during dental bleaching. Gen Dent (2010) 0.75
Effect of ceramic surface treatment on the microtensile bond strength between a resin cement and an alumina-based ceramic. J Adhes Dent (2004) 0.75
Shear bond strength of resin cement bonded to alumina ceramic after treatment by aluminum oxide sandblasting or silica coating. J Prosthodont (2011) 0.75
Effect of ceramic thickness and shade on mechanical properties of a resin luting agent. J Prosthodont (2014) 0.75
Fatigue resistance of teeth restored with fiber posts and different post cementation strengths. Gen Dent (2009) 0.75
Effect of Thickness, Processing Technique and Cooling Rate Protocol on the μTBS of a Bilayer Ceramic System. J Adhes Dent (2015) 0.75
SEM analysis of the in situ early bacterial colonization on two novel feldspathic ceramics submitted to different types of glazing. J Contemp Dent Pract (2008) 0.75
Durability of the bond strength of self-adhesive resin cements to human dentin. Gen Dent (2009) 0.75
Effect of Cervical Collar Removal on the Fracture Load of Anterior Zirconia Crowns. Int J Periodontics Restorative Dent (2017) 0.75
Stress distribution around osseointegrated implants with different internal-cone connections: photoelastic and finite element analysis. J Oral Implantol (2013) 0.75
Effect of finish line on marginal fit of sintered gold copings. Braz Dent J (2013) 0.75
Surface conditioning of a composite used for inlay/onlay restorations: effect on muTBS to resin cement. J Adhes Dent (2007) 0.75
Does adhesive resin application contribute to resin bond durability on etched and silanized feldspathic ceramic? J Adhes Dent (2008) 0.75