Published in Biomaterials on November 01, 1991
Biomimetic systems for hydroxyapatite mineralization inspired by bone and enamel. Chem Rev (2008) 1.96
Biocompatibility and biodegradation of poly(hydroxybutyrate)/poly(ethylene glycol) blend films. J Mater Sci Mater Med (2003) 0.94
Bone tissue engineering scaffolding: computer-aided scaffolding techniques. Prog Biomater (2014) 0.93
Bioactive ceramic-reinforced composites for bone augmentation. J R Soc Interface (2010) 0.89
Synthesis and characterization of nano-HA/PA66 composites. J Mater Sci Mater Med (2003) 0.88
Biocomposites and hybrid biomaterials based on calcium orthophosphates. Biomatter (2013) 0.88
Effect of lipase treatment on the biocompatibility of microbial polyhydroxyalkanoates. J Mater Sci Mater Med (2002) 0.79
Properties and in vitro characterization of polyhydroxybutyrate-chitosan scaffolds prepared by modified precipitation method. J Mater Sci Mater Med (2013) 0.78
Effect of vinyl acetate content on the sintering behavior of hydroxyapatite-ethylene vinyl acetate copolymer composites. J Mater Sci Mater Med (2002) 0.78
Microstructured microspheres of hydroxyapatite bioceramic. J Mater Sci Mater Med (2002) 0.76
Evaluation of structural and mechanical properties of electrospun nano-micro hybrid of poly hydroxybutyrate-chitosan/silk scaffold for cartilage tissue engineering. Adv Biomed Res (2016) 0.75
Production and evaluation of hydroxyapatite reinforced polysulfone for tissue replacement. J Mater Sci Mater Med (2001) 0.75
Synchrotron-Based in Situ Characterization of the Scaffold Mass Loss from Erosion Degradation. J Funct Biomater (2016) 0.75
Wnt11 plays an important role in the osteogenesis of human mesenchymal stem cells in a PHA/FN/ALG composite scaffold: possible treatment for infected bone defect. Stem Cell Res Ther (2016) 0.75
Current requirements for polymeric biomaterials in otolaryngology. GMS Curr Top Otorhinolaryngol Head Neck Surg (2011) 0.75
The influence of polymer blend composition on the degradation of polymer/hydroxyapatite biomaterials. J Mater Sci Mater Med (2001) 0.75
Biocompatibility and biodegradation of novel PHB porous substrates with controlled multi-pore size by emulsion templates method. J Mater Sci Mater Med (2006) 0.75
Additive Manufacturing of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/poly(ε-caprolactone) Blend Scaffolds for Tissue Engineering. Bioengineering (Basel) (2017) 0.75
Characterization of hydroxyapatite and carbonated apatite by photo acoustic FTIR spectroscopy. J Mater Sci Mater Med (1997) 2.28
Hydroxyapatite reinforced polyethylene--a mechanically compatible implant material for bone replacement. Biomaterials (1981) 1.77
Crack growth resistance in cortical bone: concept of microcrack toughening. J Biomech (1997) 1.69
Antigenicity and immunogenicity of collagen. J Biomed Mater Res B Appl Biomater (2004) 1.59
Characterization of porous hydroxyapatite. J Mater Sci Mater Med (1999) 1.56
A comparative study on the in vivo behavior of hydroxyapatite and silicon substituted hydroxyapatite granules. J Mater Sci Mater Med (2002) 1.42
Chemical characterization of silicon-substituted hydroxyapatite. J Biomed Mater Res (1999) 1.37
Hydroxyapatite-polyethylene composites for bone substitution: effects of ceramic particle size and morphology. Biomaterials (1998) 1.36
In vitro response of osteoblasts to hydroxyapatite-reinforced polyethylene composites. J Mater Sci Mater Med (1998) 1.31
Bioglass/high density polyethylene composite for soft tissue applications: preparation and evaluation. J Biomed Mater Res (1998) 1.29
Carbonate substitution in precipitated hydroxyapatite: an investigation into the effects of reaction temperature and bicarbonate ion concentration. J Biomed Mater Res (1998) 1.22
Optimization of benzoyl peroxide concentration in an experimental bone cement based on poly(methyl methacrylate). J Mater Sci Mater Med (1997) 1.19
Tensile characteristics of ten commercial acrylic bone cements. J Biomed Mater Res (2000) 1.17
In vitro assessment of the biological response to nano-sized hydroxyapatite. J Mater Sci Mater Med (2004) 1.14
Hydrogels as an interface between bone and an implant. Biomaterials (1993) 1.13
Characterization of the transformation from calcium-deficient apatite to beta-tricalcium phosphate. J Mater Sci Mater Med (2000) 1.11
Water absorption characteristics of modified hydroxyapatite bone cements. Biomaterials (1995) 1.10
Contribution, development and morphology of microcracking in cortical bone during crack propagation. J Biomech (2000) 1.07
Fracture mechanics of bone--the effects of density, specimen thickness and crack velocity on longitudinal fracture. J Biomech (1984) 1.07
Osteoblast behaviour on HA/PE composite surfaces with different HA volumes. Biomaterials (2002) 1.05
Comparison of in vivo dissolution processes in hydroxyapatite and silicon-substituted hydroxyapatite bioceramics. Biomaterials (2003) 1.04
Magnetron co-sputtered silicon-containing hydroxyapatite thin films--an in vitro study. Biomaterials (2005) 1.04
In situ analysis of the degree of polymerization of bone cement by using FT-Raman spectroscopy. Biomaterials (1996) 1.02
Number of polyethylene particles and osteolysis in total joint replacements. A quantitative study using a tissue-digestion method. J Bone Joint Surg Br (1997) 1.01
Human osteoblast response to silicon-substituted hydroxyapatite. J Biomed Mater Res A (2006) 0.99
Preparation and characterization of fluoride-substituted apatites. J Mater Sci Mater Med (1997) 0.98
Increasing hydroxyapatite incorporation into poly(methylmethacrylate) cement increases osteoblast adhesion and response. Biomaterials (2002) 0.98
Experimental validation of a microcracking-based toughening mechanism for cortical bone. J Biomech (2003) 0.98
Structural changes of thermally sprayed hydroxyapatite investigated by Rietveld analysis. Biomaterials (1996) 0.98
The temperature dependence of the deformation of bone. J Biomech (1968) 0.97
In vitro mechanical and biological assessment of hydroxyapatite-reinforced polyethylene composite. J Mater Sci Mater Med (1997) 0.97
A new way of incorporating silicon in hydroxyapatite (Si-HA) as thin films. J Mater Sci Mater Med (2005) 0.96
Structural evaluation of human and sheep bone and comparison with synthetic hydroxyapatite by FT-Raman spectroscopy. J Biomed Mater Res (1995) 0.94
Predictive modelling of hydroxyapatite-polyethylene composite. Biomaterials (1993) 0.93
Anisotropy of the Young's modulus of bone. Nature (1977) 0.93
In vivo assessment of hydroxyapatite and silicate-substituted hydroxyapatite granules using an ovine defect model. J Mater Sci Mater Med (2005) 0.93
Calcium phosphate coatings obtained by Nd:YAG laser cladding: physicochemical and biologic properties. J Biomed Mater Res A (2003) 0.92
Fracture toughness of compact bone. J Biomech (1976) 0.92
Quantification of bone ingrowth within bone-derived porous hydroxyapatite implants of varying density. J Mater Sci Mater Med (2004) 0.92
The size and shape of particulate polyethylene wear debris in total joint replacements. Proc Inst Mech Eng H (1997) 0.91
Development and characterization of titanium-containing hydroxyapatite for medical applications. Acta Biomater (2009) 0.91
Influence of Ringer's solution on creep resistance of hydroxyapatite reinforced polyethylene composites. J Mater Sci Mater Med (1997) 0.91
Effect of carbonate substitution on the ultrastructural characteristics of hydroxyapatite implants. J Mater Sci Mater Med (2005) 0.90
Initial interaction of osteoblasts with the surface of a hydroxyapatite-poly(methylmethacrylate) cement. Biomaterials (2001) 0.90
Effect of heat treatment on pulsed laser deposited amorphous calcium phosphate coatings. J Biomed Mater Res (1998) 0.89
Fatigue characterization of a hydroxyapatite-reinforced polyethylene composite. I. Uniaxial fatigue. J Biomed Mater Res (2000) 0.89
Evaluation of in vitro bioactivity and biocompatibility of Bioglass-reinforced polyethylene composite. J Mater Sci Mater Med (1997) 0.89
Repair of defects in articular joints. Prospects for material-based solutions in tissue engineering. J Bone Joint Surg Br (2004) 0.89
Young's and shear moduli of ceramic particle filled polyethylene. J Mater Sci Mater Med (1998) 0.89
Initial attachment of osteoblasts to an optimised HAPEX topography. Biomaterials (2002) 0.88
A contact method for the assessment of ultrasonic velocity and broadband attenuation in cortical and cancellous bone. Clin Phys Physiol Meas (1990) 0.88
Predictive modelling of the mechanical properties and failure processes in hydroxyapatite- polyethylene (Hapex) composite. J Mater Sci Mater Med (1998) 0.88
Effect of powder characteristics on the sinterability of hydroxyapatite powders. J Mater Sci Mater Med (2001) 0.88
Biomechanical assessment of bone ingrowth in porous hydroxyapatite. J Mater Sci Mater Med (1997) 0.87
Influence of sterilization by gamma irradiation and of thermal annealing on creep of hydroxyapatite-reinforced polyethylene composites. J Biomed Mater Res (1998) 0.87
Dynamic mechanical characterization of hydroxyapatite reinforced polyethylene: effect of particle size. J Mater Sci Mater Med (2000) 0.87
Development of a glass reinforced hydroxyapatite with enhanced mechanical properties. The effect of glass composition on mechanical properties and its relationship to phase changes. J Biomed Mater Res (1993) 0.87
Torsional stability of the femoral component of hip arthroplasty. Response to an anteriorly applied load. J Bone Joint Surg Br (1989) 0.87
Characterization of the transformation from calcium-deficient apatite to beta-tricalcium phosphate. J Mater Sci Mater Med (2000) 0.87
Mechanical properties of hydroxyapatite reinforced poly(ethylmethacrylate) bone cement after immersion in a physiological solution: influence of a silane coupling agent. J Mater Sci Mater Med (2000) 0.87
Biodegradable drug delivery system for the treatment of bone infection and repair. J Mater Sci Mater Med (2004) 0.87
The pathway to intelligent implants: osteoblast response to nano silicon-doped hydroxyapatite patterning. J R Soc Interface (2011) 0.86
Fatigue of cortical bone under combined axial-torsional loading. J Orthop Res (2001) 0.86
Preparation and characterization of magnesium/carbonate co-substituted hydroxyapatites. J Mater Sci Mater Med (2002) 0.86
Electron microscopy of mammalian cells in the absence of fixing, freezing, dehydration, or specimen coating. Scanning (2003) 0.85
Mechanical properties of glass-ceramic A-W-polyethylene composites: effect of filler content and particle size. Biomaterials (2004) 0.85
Differentiation of mononuclear precursors into osteoclasts on the surface of Si-substituted hydroxyapatite. J Biomed Mater Res A (2006) 0.85
Factors affecting the strength of flexor tendon repair. J Hand Surg Br (1992) 0.85
Dynamic mechanical characterization of biodegradable composites of hydroxyapatite and polylactides. J Biomed Mater Res (2001) 0.85
Surface topography and HA filler volume effect on primary human osteoblasts in vitro. J Mater Sci Mater Med (2000) 0.84
In vitro evaluation of a new polymethylmethacrylate cement reinforced with hydroxyapatite. J Mater Sci Mater Med (1999) 0.84
Spiral fracture of cortical bone. J Biomech (1982) 0.84
Deposition of nano-hydroxyapatite particles utilising direct and transitional electrohydrodynamic processes. J Mater Sci Mater Med (2008) 0.83
Chemically coupled hydroxyapatite-polyethylene composites: structure and properties. Biomaterials (2001) 0.83
Influence of nanohydroxyapatite patterns deposited by electrohydrodynamic spraying on osteoblast response. J Biomed Mater Res A (2008) 0.83
Thermal decomposition of synthesised carbonate hydroxyapatite. J Mater Sci Mater Med (2002) 0.82
Proliferation and differentiation of osteoblast-like cells on apatite-wollastonite/polyethylene composites. Biomaterials (2004) 0.82
Apatite-forming ability of glass-ceramic apatite-wollastonite - polyethylene composites: effect of filler content. J Mater Sci Mater Med (2003) 0.82
Fatigue characterization of a hydroxyapatite-reinforced polyethylene composite. II. Biaxial fatigue. J Biomed Mater Res (2000) 0.82
The response of equine cortical bone to loading at strain rates experienced in vivo by the galloping horse. Equine Vet J (1992) 0.81
Bioactivity of ceramic-polymer composites with varied composition and surface topography. J Mater Sci Mater Med (2004) 0.81
Analysis of apatite layers on glass-ceramic particulate using FTIR and FT-Raman spectroscopy. J Biomed Mater Res (2000) 0.81
Novel deposition of nano-sized silicon substituted hydroxyapatite by electrostatic spraying. J Mater Sci Mater Med (2005) 0.81
Isothermal and non-isothermal polymerization of a new bone cement. J Mater Sci Mater Med (1998) 0.81
Orientation dependence of the fracture mechanics of cortical bone. J Biomech (1989) 0.80
In vitro adhesion and biocompatability of osteoblast-like cells to poly(methylmethacrylate) and poly(ethylmethacrylate) bone cements. J Mater Sci Mater Med (2002) 0.80
Effect of crosslinking agents on poly(ethylmethacrylate) bone cements. J Mater Sci Mater Med (1997) 0.79
Calcining influence on the powder properties of hydroxyapatite. J Mater Sci Mater Med (2001) 0.79
In vitro testing of Nd:YAG laser processed calcium phosphate coatings. J Mater Sci Mater Med (2006) 0.79
Influence of aging heat treatment on mechanical properties of biomedical Ti-Zr based ternary alloys containing niobium. J Mater Sci Mater Med (1998) 0.78
Comparison between the polymerization behavior of a new bone cement and a commercial one: modeling and in vitro analysis. J Mater Sci Mater Med (1998) 0.78
Morphology and ultrastructure of the interface between hydroxyapatite-polyhydroxybutyrate composite implant and bone. J Mater Sci Mater Med (1997) 0.78
The role of surface wettability and surface charge of electrosprayed nanoapatites on the behaviour of osteoblasts. Acta Biomater (2009) 0.78
The effect of varying percentage hydroxyapatite in poly(ethylmethacrylate) bone cement on human osteoblast-like cells. J Mater Sci Mater Med (2003) 0.78
Enhanced HAPEX topography: comparison of osteoblast response to established cement. J Mater Sci Mater Med (2003) 0.78
Influence of sterilization upon a range of properties of experimental bone cements. J Mater Sci Mater Med (1997) 0.77
Analysis of surface layers on bioactive glasses. Biomaterials (1994) 0.77
Synthesis and characterization of carbonate hydroxyapatite. J Mater Sci Mater Med (1998) 0.77
Histomorphological and biomechanical characterization of calcium phosphates in the osseous environment. Proc Inst Mech Eng H (1998) 0.77
In vitro evaluation of nanosized carbonate-substituted hydroxyapatite and its polyhydroxyethylmethacrylate nanocomposite. J Biomed Mater Res A (2008) 0.77