Published in J Biomech on September 25, 2007
Measurement of Young's modulus of vocal folds by indentation. J Voice (2010) 1.62
Quantification of the temporal evolution of collagen orientation in mechanically conditioned engineered cardiovascular tissues. Ann Biomed Eng (2009) 1.00
Inelastic behaviour of collagen networks in cell-matrix interactions and mechanosensation. J R Soc Interface (2015) 0.86
Empirical measurements of biomechanical anisotropy of the human vocal fold lamina propria. Biomech Model Mechanobiol (2012) 0.85
Elastic characterization of transversely isotropic soft materials by dynamic shear and asymmetric indentation. J Biomech Eng (2012) 0.85
Pipette aspiration applied to the characterization of nonhomogeneous, transversely isotropic materials used for vocal fold modeling. J Mech Behav Biomed Mater (2012) 0.82
Mechanics and kinematics of soft tissue under indentation are determined by the degree of initial collagen fiber alignment. J Mech Behav Biomed Mater (2012) 0.78
Automatic Segmentation of Mechanically Inhomogeneous Tissues Based on Deformation Gradient Jump. IEEE Trans Med Imaging (2015) 0.78
Characterizing white matter tissue in large strain via asymmetric indentation and inverse finite element modeling. J Mech Behav Biomed Mater (2016) 0.76
A nonlinear anisotropic inverse method for computational dissection of inhomogeneous planar tissues. Comput Methods Biomech Biomed Engin (2016) 0.75
Age-Dependent Changes in Geometry, Tissue Composition and Mechanical Properties of Fetal to Adult Cryopreserved Human Heart Valves. PLoS One (2016) 0.75
Decreased mechanical stiffness in LMNA-/- cells is caused by defective nucleo-cytoskeletal integrity: implications for the development of laminopathies. Hum Mol Genet (2004) 2.42
Determination of the Poisson's ratio of the cell: recovery properties of chondrocytes after release from complete micropipette aspiration. J Biomech (2005) 2.29
Influence of osmotic pressure changes on the opening of existing cracks in 2 intervertebral disc models. Spine (Phila Pa 1976) (2006) 1.49
Fluorescently labeled collagen binding proteins allow specific visualization of collagen in tissues and live cell culture. Anal Biochem (2006) 1.33
Tissue engineering of human heart valve leaflets: a novel bioreactor for a strain-based conditioning approach. Ann Biomed Eng (2005) 1.32
Linear viscoelastic behavior of subcutaneous adipose tissue. Biorheology (2008) 1.25
Minimally-invasive implantation of living tissue engineered heart valves: a comprehensive approach from autologous vascular cells to stem cells. J Am Coll Cardiol (2010) 1.19
Predicting local cell deformations in engineered tissue constructs: a multilevel finite element approach. J Biomech Eng (2002) 1.18
Fibrin as a cell carrier in cardiovascular tissue engineering applications. Biomaterials (2005) 1.16
The role of collagen cross-links in biomechanical behavior of human aortic heart valve leaflets--relevance for tissue engineering. Tissue Eng (2007) 1.12
Does subcutaneous adipose tissue behave as an (anti-)thixotropic material? J Biomech (2010) 1.10
Tissue engineering of heart valves: advances and current challenges. Expert Rev Med Devices (2009) 1.10
High resolution imaging of collagen organisation and synthesis using a versatile collagen specific probe. J Struct Biol (2007) 1.09
Decellularized homologous tissue-engineered heart valves as off-the-shelf alternatives to xeno- and homografts. Biomaterials (2012) 1.08
A structural constitutive model for collagenous cardiovascular tissues incorporating the angular fiber distribution. J Biomech Eng (2005) 1.07
Off-the-shelf human decellularized tissue-engineered heart valves in a non-human primate model. Biomaterials (2013) 1.05
Advanced maturation by electrical stimulation: Differences in response between C2C12 and primary muscle progenitor cells. J Tissue Eng Regen Med (2010) 1.03
Improved prediction of the collagen fiber architecture in the aortic heart valve. J Biomech Eng (2005) 1.01
Autologous human tissue-engineered heart valves: prospects for systemic application. Circulation (2006) 1.00
Tailoring fiber diameter in electrospun poly(epsilon-caprolactone) scaffolds for optimal cellular infiltration in cardiovascular tissue engineering. Tissue Eng Part A (2009) 1.00
Quantification of the temporal evolution of collagen orientation in mechanically conditioned engineered cardiovascular tissues. Ann Biomed Eng (2009) 1.00
Remodelling of the angular collagen fiber distribution in cardiovascular tissues. Biomech Model Mechanobiol (2007) 1.00
Effect of strain magnitude on the tissue properties of engineered cardiovascular constructs. Ann Biomed Eng (2007) 0.99
Modeling the mechanics of tissue-engineered human heart valve leaflets. J Biomech (2006) 0.98
Computational analyses of mechanically induced collagen fiber remodeling in the aortic heart valve. J Biomech Eng (2003) 0.98
Mechanical characterization of anisotropic planar biological soft tissues using large indentation: a computational feasibility study. J Biomech Eng (2006) 0.96
The influence of serum-free culture conditions on skeletal muscle differentiation in a tissue-engineered model. Tissue Eng Part A (2008) 0.96
Effects of a combined mechanical stimulation protocol: Value for skeletal muscle tissue engineering. J Biomech (2010) 0.95
Intermittent straining accelerates the development of tissue properties in engineered heart valve tissue. Tissue Eng Part A (2009) 0.94
The relative contributions of compression and hypoxia to development of muscle tissue damage: an in vitro study. Ann Biomed Eng (2006) 0.94
Increased cardiac myocyte PDE5 levels in human and murine pressure overload hypertrophy contribute to adverse LV remodeling. PLoS One (2013) 0.92
Hypoxia induces near-native mechanical properties in engineered heart valve tissue. Circulation (2008) 0.92
Osmoviscoelastic finite element model of the intervertebral disc. Eur Spine J (2006) 0.92
Tissue-engineered heart valves develop native-like collagen fiber architecture. Tissue Eng Part A (2010) 0.90
Stress related collagen ultrastructure in human aortic valves--implications for tissue engineering. J Biomech (2008) 0.90
Local axial compressive mechanical properties of human carotid atherosclerotic plaques-characterisation by indentation test and inverse finite element analysis. J Biomech (2013) 0.89
The influence of matrix integrity on stress-fiber remodeling in 3D. Biomaterials (2012) 0.89
Mechanoregulation of vascularization in aligned tissue-engineered muscle: a role for vascular endothelial growth factor. Tissue Eng Part A (2011) 0.89
A microstructurally motivated model of the mechanical behavior of tissue engineered blood vessels. Ann Biomed Eng (2008) 0.88
Soft substrates normalize nuclear morphology and prevent nuclear rupture in fibroblasts from a laminopathy patient with compound heterozygous LMNA mutations. Nucleus (2013) 0.88
Strain-induced collagen organization at the micro-level in fibrin-based engineered tissue constructs. Ann Biomed Eng (2012) 0.88
Temporal differences in the influence of ischemic factors and deformation on the metabolism of engineered skeletal muscle. J Appl Physiol (1985) (2007) 0.87
Engineering skeletal muscle tissues from murine myoblast progenitor cells and application of electrical stimulation. J Vis Exp (2013) 0.87
Matrix production and remodeling capacity of cardiomyocyte progenitor cells during in vitro differentiation. J Mol Cell Cardiol (2012) 0.87
An in vitro model system to quantify stress generation, compaction, and retraction in engineered heart valve tissue. Tissue Eng Part C Methods (2011) 0.86
Monitoring local cell viability in engineered tissues: a fast, quantitative, and nondestructive approach. Tissue Eng (2003) 0.85
Viscoelastic properties of single attached cells under compression. J Biomech Eng (2005) 0.85
Are disc pressure, stress, and osmolarity affected by intra- and extrafibrillar fluid exchange? J Orthop Res (2007) 0.84
Influence of substrate stiffness on circulating progenitor cell fate. J Biomech (2011) 0.84
Anisotropic, three-dimensional deformation of single attached cells under compression. Ann Biomed Eng (2004) 0.84
Translating autologous heart valve tissue engineering from bench to bed. Tissue Eng Part B Rev (2009) 0.84
Evaluation of a continuous quantification method of apoptosis and necrosis in tissue cultures. Cytotechnology (2005) 0.83
The transport profile of cytokines in epidermal equivalents subjected to mechanical loading. Ann Biomed Eng (2009) 0.83
Mechanisms that play a role in the maintenance of the calcium gradient in the epidermis. Skin Res Technol (2007) 0.83
Centrifuges and inertial shear forces. J Gravit Physiol (2004) 0.82
Dynamic straining combined with fibrin gel cell seeding improves strength of tissue-engineered small-diameter vascular grafts. Tissue Eng Part A (2009) 0.82
Controlling matrix formation and cross-linking by hypoxia in cardiovascular tissue engineering. J Appl Physiol (1985) (2010) 0.82
Diffusion measurements in epidermal tissues with fluorescent recovery after photobleaching. Skin Res Technol (2008) 0.81
The non-linear mechanical properties of soft engineered biological tissues determined by finite spherical indentation. Comput Methods Biomech Biomed Engin (2008) 0.81
Finite element model of mechanically induced collagen fiber synthesis and degradation in the aortic valve. Ann Biomed Eng (2003) 0.81
Review article: Tissue engineering of semilunar heart valves: current status and future developments. J Heart Valve Dis (2004) 0.81