Published in Clin Implant Dent Relat Res on May 07, 2009
A three-dimensional finite element study on the stress distribution pattern of two prosthetic abutments for external hexagon implants. Eur J Dent (2013) 0.90
Finite element analysis: A boon to dentistry. J Oral Biol Craniofac Res (2014) 0.79
Long-term cumulative survival and mechanical complications of single-tooth Ankylos Implants: focus on the abutment neck fractures. J Adv Prosthodont (2015) 0.78
Is the internal connection more efficient than external connection in mechanical, biological, and esthetical point of views? A systematic review. Oral Maxillofac Surg (2015) 0.78
A retrospective study of implant-abutment connections on crestal bone level. J Dent Res (2013) 0.78
Nonlinear finite element analysis of three implant- abutment interface designs. Int J Oral Sci (2012) 0.75
Biomechanical effects of the implant material and implant-abutment interface in immediately loaded small-diameter implants. Clin Oral Investig (2013) 0.75
Bone quality assessment based on cone beam computed tomography imaging. Clin Oral Implants Res (2009) 1.24
Angiogenesis in bone fracture healing: a bioregulatory model. J Theor Biol (2007) 1.20
Biologic outcome of implant-supported restorations in the treatment of partial edentulism. part I: a longitudinal clinical evaluation. Clin Oral Implants Res (2002) 1.10
Mechanics of acute subdural hematomas resulting from bridging vein rupture. J Neurosurg (2006) 1.00
Peri-implant bone tissue assessment by comparing the outcome of intra-oral radiograph and cone beam computed tomography analyses to the histological standard. Clin Oral Implants Res (2010) 0.98
Implant design and interface force transfer. A photoelastic and strain-gauge analysis. Clin Oral Implants Res (2004) 0.97
The service life of implant-retained overdenture attachment systems. J Prosthet Dent (2009) 0.95
How isometric are the medial patellofemoral, superficial medial collateral, and lateral collateral ligaments of the knee? Am J Sports Med (2009) 0.95
Occlusal overload and bone/implant loss. Clin Oral Implants Res (2012) 0.94
The effect of micro-motion on the tissue response around immediately loaded roughened titanium implants in the rabbit. Eur J Oral Sci (2007) 0.94
Influence of controlled immediate loading and implant design on peri-implant bone formation. J Clin Periodontol (2007) 0.92
A classification of cranial implants based on the degree of difficulty in computer design and manufacture. Int J Med Robot (2008) 0.91
Bone tissue response to porous and functionalized titanium and silica based coatings. PLoS One (2011) 0.90
Biologic outcome of implant-supported restorations in the treatment of partial edentulism. Part 2: a longitudinal radiographic study. Clin Oral Implants Res (2002) 0.90
Validation of microfocus computed tomography in the evaluation of bone implant specimens. Clin Implant Dent Relat Res (2005) 0.87
Biomechanical evaluation of platform switching in different implant protocols: computed tomography-based three-dimensional finite element analysis. Int J Oral Maxillofac Implants (2010) 0.86
The effect of whole-body vibration on peri-implant bone healing in rats. Clin Oral Implants Res (2010) 0.85
Early trabecular bone healing around titanium implants: a histologic study in rabbits. J Periodontol (2007) 0.84
Histodynamics of bone tissue formation around immediately loaded cylindrical implants in the rabbit. Clin Oral Implants Res (2007) 0.84
Controlled release of chlorhexidine antiseptic from microporous amorphous silica applied in open porosity of an implant surface. Int J Pharm (2011) 0.84
Effect of strain at low-frequency loading on peri-implant bone (re)modelling: a guinea-pig experimental study. Clin Oral Implants Res (2008) 0.84
Fatigue and fluoride corrosion on Streptococcus mutans adherence to titanium-based implant/component surfaces. J Prosthodont (2009) 0.84
Effect of controlled early implant loading on bone healing and bone mass in guinea pigs, as assessed by micro-CT and histology. Eur J Oral Sci (2006) 0.83
Fast and accurate specimen-specific simulation of trabecular bone elastic modulus using novel beam-shell finite element models. J Biomech (2011) 0.83
Influence of a fluoridated medium with different pHs on commercially pure titanium-based implants. J Prosthodont (2008) 0.83
Comparative gravimetric wear analysis in mobile versus fixed-bearing posterior stabilized total knee prostheses. Acta Orthop Belg (2010) 0.82
Influence of whole-body vibration time on peri-implant bone healing: a histomorphometrical animal study. J Clin Periodontol (2010) 0.82
3D characterization of bone strains in the rat tibia loading model. Biomech Model Mechanobiol (2011) 0.81
Use of micro-CT-based finite element analysis to accurately quantify peri-implant bone strains: a validation in rat tibiae. Biomech Model Mechanobiol (2011) 0.81
Early cellular responses in cortical bone healing around unloaded titanium implants: an animal study. J Periodontol (2006) 0.81
Impact of implant number, distribution and prosthesis material on loading on implants supporting fixed prostheses. J Oral Rehabil (2010) 0.80
Correlation between compression, tensile and tearing tests on healthy and calcified aortic tissues. Med Eng Phys (2008) 0.80
Skull reconstruction planning transfer to the operation room by thin metallic templates: clinical results. J Craniomaxillofac Surg (2008) 0.80
Gait assessment during the initial fitting of customized selective laser sintering ankle foot orthoses in subjects with drop foot. Prosthet Orthot Int (2012) 0.80
Stimulation of titanium implant osseointegration through high-frequency vibration loading is enhanced when applied at high acceleration. Calcif Tissue Int (2014) 0.80
Effect of implant surface roughness and loading on peri-implant bone formation. J Periodontol (2008) 0.79
Direct high-frequency stimulation of peri-implant rabbit bone: a pilot study. Clin Implant Dent Relat Res (2010) 0.79
Timing of loading--immediate, early, or delayed--in the outcome of implants in the edentulous mandible: a prospective clinical trial. Int J Oral Maxillofac Implants (2007) 0.79
Evaluation of a preparation depth controlling device: a pilot study. Quintessence Int (2007) 0.78
Application of mechanoregulatory models to simulate peri-implant tissue formation in an in vivo bone chamber. J Biomech (2007) 0.78
In vivo assessment of the effect of controlled high- and low-frequency mechanical loading on peri-implant bone healing. J R Soc Interface (2012) 0.78
Effect of cyclic compressive loading on the bond strength of an adhesive system to dentin after collagen removal. J Adhes Dent (2005) 0.78
Biomechanical evaluation of platform switching: different mismatch sizes, connection types, and implant protocols. J Periodontol (2014) 0.78
A repeated sampling bone chamber methodology for the evaluation of tissue differentiation and bone adaptation around titanium implants under controlled mechanical conditions. J Biomech (2004) 0.78
Enhancement of implant osseointegration by high-frequency low-magnitude loading. PLoS One (2012) 0.77
Early cortical bone healing around loaded titanium implants: a histological study in the rabbit. Clin Oral Implants Res (2009) 0.77
Alterated talar and navicular bone morphology is associated with pes planus deformity: a CT-scan study. J Orthop Res (2012) 0.77
Effect of tilted and short distal implants on axial forces and bending moments in implants supporting fixed dental prostheses: an in vitro study. Int J Prosthodont (2011) 0.77
Impaired osteoblastogenesis potential of progenitor cells in skeletal unloading is associated with alterations in angiogenic and energy metabolism profile. Biomed Mater Eng (2012) 0.76
Constant strain rate and peri-implant bone modeling: an in vivo longitudinal micro-CT analysis. Clin Implant Dent Relat Res (2011) 0.76
Influence of implant design on the biomechanical environment of immediately placed implants: computed tomography-based nonlinear three-dimensional finite element analysis. Int J Oral Maxillofac Implants (2011) 0.76
How correctly does an intramedullary rod represent the longitudinal tibial axes? Clin Orthop Relat Res (2002) 0.76
In vitro comparison of 1.5 mm vs. 2.0 mm screws for fixation in the sagittal split osteotomy. J Craniomaxillofac Surg (2011) 0.76
Influence of notch geometry and interface on stress concentration and distribution in micro-tensile bond strength specimens. J Dent (2008) 0.76
Mechanical loading affects angiogenesis and osteogenesis in an in vivo bone chamber: a modeling study. Tissue Eng Part A (2010) 0.76
Bone tissue response to BMP-2 adsorbed on amorphous microporous silica implants. J Clin Periodontol (2012) 0.76
In vitro and in vivo investigation of the potential of amorphous microporous silica as a protein delivery vehicle. Biomed Res Int (2013) 0.75
Assessment of the primary rotational stability of uncemented hip stems using an analytical model: comparison with finite element analyses. J Orthop Surg Res (2008) 0.75
Digital image processing of live/dead staining. Methods Mol Biol (2011) 0.75
Influence of Connection Types and Implant Number on the Biomechanical Behavior of Mandibular Full-Arch Rehabilitation. Int J Oral Maxillofac Implants (2016) 0.75
Establishment of an in vivo model for molecular assessment of titanium implant osseointegration in compromised bone. Tissue Eng Part C Methods (2010) 0.75
A visco-elastic model for the prediction of orthodontic tooth movement. Comput Methods Biomech Biomed Engin (2012) 0.75
Estimation of optimal pivot point for remote center of motion alignment in surgery. Int J Comput Assist Radiol Surg (2014) 0.75
Effect of thermal treatments on tensile strength of commercially cast pure titanium and Ti-6Al-4V alloys. J Mater Sci Mater Med (2005) 0.75
Why are there so few female prosthodontic teachers? Int J Prosthodont (2007) 0.75
Modelling the effect of repositioning on the evolution of skeletal muscle damage in deep tissue injury. Biomech Model Mechanobiol (2012) 0.75
Peri-implant bone tissue strains in cases of dehiscence: a finite element study. Clin Oral Implants Res (2002) 0.75
Modeling human-bed interaction: the predictive value of anthropometric models in choosing the correct bed support. Work (2012) 0.75
Finite element analysis of bone around a dental implant supporting a crown with a premature contact. J Med Assoc Thai (2009) 0.75
Phosphorylated Pullulan Coating Enhances Titanium Implant Osseointegration in a Pig Model. Int J Oral Maxillofac Implants (2017) 0.75
Bone tissue response to implant surfaces functionalized with phosphate-containing polymers. Clin Oral Implants Res (2012) 0.75
Algorithms for ultrasound elastography: a survey. Comput Methods Biomech Biomed Engin (2011) 0.75
Fatigue performance of joints executed in pure titanium structures with several diameters. Dent Mater J (2011) 0.75