Published in Biomacromolecules on March 08, 2010
Integrated 3D-printed reactionware for chemical synthesis and analysis. Nat Chem (2012) 3.23
The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells. Biomaterials (2011) 1.07
Evaluation of osteoconductive scaffolds in the canine femoral multi-defect model. Tissue Eng Part A (2013) 0.84
Induction of osteogenic differentiation of adipose derived stem cells by microstructured nitinol actuator-mediated mechanical stress. PLoS One (2012) 0.81
Use of micro-computed tomography to nondestructively characterize biomineral coatings on solid freeform fabricated poly (L-lactic acid) and poly ((ε-caprolactone) scaffolds in vitro and in vivo. Tissue Eng Part C Methods (2013) 0.81
Cryotemplation for the Rapid Fabrication of Porous, Patternable Photopolymerized Hydrogels. J Mater Chem B Mater Biol Med (2014) 0.77
Enhancement of cell ingrowth, proliferation, and early differentiation in a three-dimensional silicon carbide scaffold using low-intensity pulsed ultrasound. Tissue Eng Part A (2014) 0.76
Electrically conductive surface modifications of three-dimensional polypropylene fumarate scaffolds. J Biol Regul Homeost Agents (2011) 0.75
Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials (2005) 7.55
Scaffolds in tissue engineering bone and cartilage. Biomaterials (2000) 6.11
Porous scaffold design for tissue engineering. Nat Mater (2005) 5.00
The direct examination of three-dimensional bone architecture in vitro by computed tomography. J Bone Miner Res (1989) 2.89
Three-dimensional imaging of vasculature and parenchyma in intact rodent organs with X-ray micro-CT. Am J Physiol (1998) 2.52
Biomaterial developments for bone tissue engineering. Biomaterials (2000) 2.48
Potential of ceramic materials as permanently implantable skeletal prostheses. J Biomed Mater Res (1970) 2.45
Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering. Biomaterials (2004) 2.35
Osteoconduction at porous hydroxyapatite with various pore configurations. Biomaterials (2000) 1.71
Three-dimensional culture of rat calvarial osteoblasts in porous biodegradable polymers. Biomaterials (1998) 1.69
Poly-epsilon-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering. Acta Biomater (2006) 1.49
Formation of three-dimensional cell/polymer constructs for bone tissue engineering in a spinner flask and a rotating wall vessel bioreactor. J Biomed Mater Res (2002) 1.46
Assessment of bone ingrowth into porous biomaterials using MICRO-CT. Biomaterials (2007) 1.43
Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: three-dimensional micro-CT based structural analyses of porous bioactive titanium implants. Biomaterials (2006) 1.35
Biodegradable bone repair materials. Synthetic polymers and ceramics. Clin Orthop Relat Res (1986) 1.34
Bone-tissue-engineering material poly(propylene fumarate): correlation between molecular weight, chain dimensions, and physical properties. Biomacromolecules (2006) 1.30
Physical properties and cellular responses to crosslinkable poly(propylene fumarate)/hydroxyapatite nanocomposites. Biomaterials (2008) 1.26
Fabrication and characterization of poly(propylene fumarate) scaffolds with controlled pore structures using 3-dimensional printing and injection molding. Tissue Eng (2006) 1.26
Nondestructive micro-computed tomography for biological imaging and quantification of scaffold-bone interaction in vivo. Biomaterials (2007) 1.24
Quantitative analysis of interconnectivity of porous biodegradable scaffolds with micro-computed tomography. J Biomed Mater Res A (2004) 1.23
In vitro response of MC3T3-E1 pre-osteoblasts within three-dimensional apatite-coated PLGA scaffolds. J Biomed Mater Res B Appl Biomater (2005) 1.23
A composite of hydroxyapatite with electrospun biodegradable nanofibers as a tissue engineering material. J Biosci Bioeng (2005) 1.17
Marrow stromal osteoblast function on a poly(propylene fumarate)/beta-tricalcium phosphate biodegradable orthopaedic composite. Biomaterials (2000) 1.11
Crosslinking characteristics of an injectable poly(propylene fumarate)/beta-tricalcium phosphate paste and mechanical properties of the crosslinked composite for use as a biodegradable bone cement. J Biomed Mater Res (1999) 1.07
A poly(lactide-co-glycolide)/hydroxyapatite composite scaffold with enhanced osteoconductivity. J Biomed Mater Res A (2007) 1.02
In vitro assessment of cell penetration into porous hydroxyapatite scaffolds with a central aligned channel. Biomaterials (2004) 0.95
The roles of matrix polymer crystallinity and hydroxyapatite nanoparticles in modulating material properties of photo-crosslinked composites and bone marrow stromal cell responses. Biomaterials (2009) 0.93
MicroCT analysis of hydroxyapatite bone repair scaffolds created via three-dimensional printing for evaluating the effects of scaffold architecture on bone ingrowth. J Biomed Mater Res A (2008) 0.88
Migration, matrix production and lamellar bone formation of human osteoblast-like cells in porous titanium implants. Cells Tissues Organs (2002) 0.88
Biocompatibility of novel polymer-apatite nanocomposite fibers. J Biomed Mater Res A (2008) 0.85
Manufacturing and characterization of 3-d hydroxyapatite bone tissue engineering scaffolds. Ann N Y Acad Sci (2002) 0.81
Preparation and characterization of nano-hydroxyapatite/polymer composite scaffolds. J Mater Sci Mater Med (2008) 0.81
Polylactide based nanostructured biomaterials and their applications. J Nanosci Nanotechnol (2007) 0.78
Targeted delivery of gemcitabine to pancreatic adenocarcinoma using cetuximab as a targeting agent. Cancer Res (2008) 2.20
Operative management of sacral chordoma. J Bone Joint Surg Am (2005) 2.12
Tissue engineering of bone: material and matrix considerations. J Bone Joint Surg Am (2008) 1.91
Effect of local sequential VEGF and BMP-2 delivery on ectopic and orthotopic bone regeneration. Biomaterials (2009) 1.87
COL1 C-propeptide cleavage site mutations cause high bone mass osteogenesis imperfecta. Hum Mutat (2011) 1.77
Multiple-channel scaffolds to promote spinal cord axon regeneration. Biomaterials (2005) 1.68
Retention of in vitro and in vivo BMP-2 bioactivities in sustained delivery vehicles for bone tissue engineering. Biomaterials (2008) 1.59
Mesenchymal stem cells for bone repair and metabolic bone diseases. Mayo Clin Proc (2009) 1.59
Bioactive poly(L-lactic acid) conduits seeded with Schwann cells for peripheral nerve regeneration. Biomaterials (2002) 1.47
Designing ideal conduits for peripheral nerve repair. Neurosurg Focus (2009) 1.38
Potential therapeutic application of gold nanoparticles in B-chronic lymphocytic leukemia (BCLL): enhancing apoptosis. J Nanobiotechnology (2007) 1.37
Synthesis and characterizations of biodegradable and crosslinkable poly(epsilon-caprolactone fumarate), poly(ethylene glycol fumarate), and their amphiphilic copolymer. Biomaterials (2005) 1.30
Bone-tissue-engineering material poly(propylene fumarate): correlation between molecular weight, chain dimensions, and physical properties. Biomacromolecules (2006) 1.30
Synthesis, material properties, and biocompatibility of a novel self-cross-linkable poly(caprolactone fumarate) as an injectable tissue engineering scaffold. Biomacromolecules (2005) 1.29
Physical properties and cellular responses to crosslinkable poly(propylene fumarate)/hydroxyapatite nanocomposites. Biomaterials (2008) 1.26
Fabrication and characterization of poly(propylene fumarate) scaffolds with controlled pore structures using 3-dimensional printing and injection molding. Tissue Eng (2006) 1.26
Quantitative analysis of interconnectivity of porous biodegradable scaffolds with micro-computed tomography. J Biomed Mater Res A (2004) 1.23
A biofilm approach to detect bacteria on removed spinal implants. Spine (Phila Pa 1976) (2010) 1.22
Modulation of differentiation and mineralization of marrow stromal cells cultured on biomimetic hydrogels modified with Arg-Gly-Asp containing peptides. J Biomed Mater Res A (2004) 1.22
Current tissue engineering and novel therapeutic approaches to axonal regeneration following spinal cord injury using polymer scaffolds. Respir Physiol Neurobiol (2009) 1.22
Stimulation of neurite outgrowth using positively charged hydrogels. Biomaterials (2009) 1.21
Neural stem cell- and Schwann cell-loaded biodegradable polymer scaffolds support axonal regeneration in the transected spinal cord. Tissue Eng Part A (2009) 1.21
Metastatic bone disease: diagnosis, evaluation, and treatment. J Bone Joint Surg Am (2009) 1.21
Poly(propylene fumarate) bone tissue engineering scaffold fabrication using stereolithography: effects of resin formulations and laser parameters. Biomacromolecules (2007) 1.20
A systematic review of animal models used to study nerve regeneration in tissue-engineered scaffolds. Biomaterials (2012) 1.18
Biodegradable polymer grafts for surgical repair of the injured spinal cord. Neurosurgery (2002) 1.18
Osteogenic differentiation of rat bone marrow stromal cells cultured on Arg-Gly-Asp modified hydrogels without dexamethasone and beta-glycerol phosphate. Biomaterials (2005) 1.17
C1 anatomy and dimensions relative to lateral mass screw placement. Spine (Phila Pa 1976) (2007) 1.16
Photo-cross-linked hybrid polymer networks consisting of poly(propylene fumarate) and poly(caprolactone fumarate): controlled physical properties and regulated bone and nerve cell responses. Biomacromolecules (2008) 1.16
Mechanical effects of partial sacrectomy: when is reconstruction necessary? Clin Orthop Relat Res (2006) 1.13
Attachment, proliferation, and migration of marrow stromal osteoblasts cultured on biomimetic hydrogels modified with an osteopontin-derived peptide. Biomaterials (2004) 1.13
Severe osteogenesis imperfecta in cyclophilin B-deficient mice. PLoS Genet (2009) 1.12
Reconstruction after total sacrectomy: early experience with a new surgical technique. Clin Orthop Relat Res (2005) 1.11
Metastatic disease of the spine: evaluation and treatment. Clin Orthop Relat Res (2003) 1.11
Relationship between surgical margins and local recurrence in sarcomas of the spine. Clin Orthop Relat Res (2002) 1.07
Total en bloc spondylectomy of C5 vertebra for chordoma. Spine (Phila Pa 1976) (2007) 1.05
Bowel and bladder function after major sacral resection. Clin Orthop Relat Res (2002) 1.04
Photo-crosslinked poly(epsilon-caprolactone fumarate) networks for guided peripheral nerve regeneration: material properties and preliminary biological evaluations. Acta Biomater (2009) 1.04
Methods for in vitro characterization of multichannel nerve tubes. J Biomed Mater Res A (2008) 1.04
Controlling dispersion of axonal regeneration using a multichannel collagen nerve conduit. Biomaterials (2010) 1.02
Nerve tubes for peripheral nerve repair. Neurosurg Clin N Am (2009) 1.02
Histone deacetylase 3 is required for maintenance of bone mass during aging. Bone (2012) 1.01
MicroRNA-34c inversely couples the biological functions of the runt-related transcription factor RUNX2 and the tumor suppressor p53 in osteosarcoma. J Biol Chem (2013) 1.01
The development of electrically conductive polycaprolactone fumarate-polypyrrole composite materials for nerve regeneration. Biomaterials (2010) 1.01
Urgent surgical decompression compared to methylprednisolone for the treatment of acute spinal cord injury: a randomized prospective study in beagle dogs. Spine (Phila Pa 1976) (2008) 1.00
Effect of autologous bone marrow stromal cell seeding and bone morphogenetic protein-2 delivery on ectopic bone formation in a microsphere/poly(propylene fumarate) composite. Tissue Eng Part A (2009) 1.00
Characterization of photo-cross-linked oligo[poly(ethylene glycol) fumarate] hydrogels for cartilage tissue engineering. Biomacromolecules (2007) 1.00
Cross-linking characteristics and mechanical properties of an injectable biomaterial composed of polypropylene fumarate and polycaprolactone co-polymer. J Biomater Sci Polym Ed (2010) 0.99
High-resolution genomic mapping reveals consistent amplification of the fibroblast growth factor receptor substrate 2 gene in well-differentiated and dedifferentiated liposarcoma. Genes Chromosomes Cancer (2011) 0.99
Non-invasive monitoring of BMP-2 retention and bone formation in composites for bone tissue engineering using SPECT/CT and scintillation probes. J Control Release (2008) 0.98
Relationship between scaffold channel diameter and number of regenerating axons in the transected rat spinal cord. Acta Biomater (2009) 0.97
Collagen type I hydrogel allows migration, proliferation, and osteogenic differentiation of rat bone marrow stromal cells. J Biomed Mater Res A (2010) 0.97
Development of an injectable, in situ crosslinkable, degradable polymeric carrier for osteogenic cell populations. Part 1. Encapsulation of marrow stromal osteoblasts in surface crosslinked gelatin microparticles. Biomaterials (2002) 0.96
Poly(carbonate urethane) and poly(ether urethane) biodegradation: in vivo studies. J Biomed Mater Res A (2004) 0.96
Porous tantalum and poly-epsilon-caprolactone biocomposites for osteochondral defect repair: preliminary studies in rabbits. J Orthop Res (2010) 0.96
Accuracy of motor axon regeneration across autograft, single-lumen, and multichannel poly(lactic-co-glycolic acid) nerve tubes. Neurosurgery (2008) 0.96
Augmentation of surgical angiogenesis in vascularized bone allotransplants with host-derived a/v bundle implantation, fibroblast growth factor-2, and vascular endothelial growth factor administration. J Orthop Res (2010) 0.95
Parabolic dependence of material properties and cell behavior on the composition of polymer networks via simultaneously controlling crosslinking density and crystallinity. Biomaterials (2010) 0.95
Histocompatibility of photocrosslinked polyanhydrides: a novel in situ forming orthopaedic biomaterial. J Biomed Mater Res A (2003) 0.95
Aneurysmal bone cyst of the cervical spine in children. J Bone Joint Surg Am (2011) 0.94
Rat sciatic nerve repair with a poly-lactic-co-glycolic acid scaffold and nerve growth factor releasing microspheres. Microsurgery (2011) 0.94
Controlled drug release from a novel injectable biodegradable microsphere/scaffold composite based on poly(propylene fumarate). J Biomed Mater Res A (2006) 0.94
A stimuli-responsive hydrogel for doxorubicin delivery. Biomaterials (2010) 0.94
Potential of hydrogels based on poly(ethylene glycol) and sebacic acid as orthopedic tissue engineering scaffolds. Tissue Eng Part A (2009) 0.94
Anatomic relationship of the internal carotid artery to the C1 vertebra: A case report of cervical reconstruction for chordoma and pilot study to assess the risk of screw fixation of the atlas. Spine (Phila Pa 1976) (2003) 0.93
Comparison of polymer scaffolds in rat spinal cord: a step toward quantitative assessment of combinatorial approaches to spinal cord repair. Biomaterials (2011) 0.93