Published in Acta Biomater on February 02, 2010
Recent advances in bone tissue engineering scaffolds. Trends Biotechnol (2012) 2.13
3D Printing of Scaffolds for Tissue Regeneration Applications. Adv Healthc Mater (2015) 0.94
Porous tantalum coatings prepared by vacuum plasma spraying enhance bmscs osteogenic differentiation and bone regeneration in vitro and in vivo. PLoS One (2013) 0.93
Trabecular metal in total knee arthroplasty associated with higher knee scores: a randomized controlled trial. Clin Orthop Relat Res (2013) 0.92
Continued stabilization of trabecular metal tibial monoblock total knee arthroplasty components at 5 years-measured with radiostereometric analysis. Acta Orthop (2011) 0.92
Porous metal for orthopedics implants. Clin Cases Miner Bone Metab (2013) 0.90
Biological characteristics of the MG-63 human osteosarcoma cells on composite tantalum carbide/amorphous carbon films. PLoS One (2014) 0.86
Biocompatibility and osteogenic properties of porous tantalum. Exp Ther Med (2015) 0.86
Effects of surface coating on reducing friction and wear of orthopaedic implants. Sci Technol Adv Mater (2014) 0.84
Biological strategies for improved osseointegration and osteoinduction of porous metal orthopedic implants. Tissue Eng Part B Rev (2014) 0.82
Spatial Control of Cell-Nanosurface Interactions by Tantalum Oxide Nanodots for Improved Implant Geometry. PLoS One (2016) 0.79
MgO-doped tantalum coating on Ti: microstructural study and biocompatibility evaluation. ACS Appl Mater Interfaces (2012) 0.79
Trabecular metal tibial knee component still stable at 10 years. Acta Orthop (2016) 0.79
Are porous tantalum cups superior to conventional reinforcement rings? Acta Orthop (2016) 0.78
Surface characterization and in vivo evaluation of laser sintered and machined implants followed by resorbable-blasting media process: A study in sheep. Med Oral Patol Oral Cir Bucal (2016) 0.77
Biomaterials for tissue engineering. Ann Biomed Eng (2013) 0.77
Wear Performance of Laser Processed Tantalum Coatings. Mater Sci Eng C Mater Biol Appl (2011) 0.77
Role of integrin α2 β1 in mediating osteoblastic differentiation on three-dimensional titanium scaffolds with submicron-scale texture. J Biomed Mater Res A (2014) 0.76
The application of porous tantalum cylinder to the repair of comminuted bone defects: a study of rabbit firearm injuries. Int J Clin Exp Med (2015) 0.76
Effect of Porosity of Alumina and Zirconia Ceramics toward Pre-Osteoblast Response. Front Bioeng Biotechnol (2015) 0.75
Effects of nano tantalum implants on inducing osteoblast proliferation and differentiation. Exp Ther Med (2016) 0.75
Biofunctionalization strategies on tantalum-based materials for osseointegrative applications. J Mater Sci Mater Med (2015) 0.75
A Method to Represent Heterogeneous Materials for Rapid Prototyping: The Matryoshka Approach. Rapid Prototyp J (2015) 0.75
Bone cell-materials interactions and Ni ion release of anodized equiatomic NiTi alloy. Acta Biomater (2011) 0.75
Preparation and characterization of biomedical highly porous Ti-Nb alloy. J Mater Sci Mater Med (2016) 0.75
Enhanced Biocompatibility in Anodic TaO x Nanotube Arrays. Nanoscale Res Lett (2017) 0.75
Involvement of autophagy in tantalum nanoparticle-induced osteoblast proliferation. Int J Nanomedicine (2017) 0.75
Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials (2005) 7.55
Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial. J Bone Joint Surg Br (1999) 3.36
Novel bioactive materials with different mechanical properties. Biomaterials (2003) 3.16
Fabrication methods of porous metals for use in orthopaedic applications. Biomaterials (2006) 2.00
Experimental and clinical performance of porous tantalum in orthopedic surgery. Biomaterials (2006) 1.77
Porous surface layered prosthetic devices. Biomed Eng (1975) 1.72
Tissue response to porous tantalum acetabular cups: a canine model. J Arthroplasty (1999) 1.67
Sintered fiber metal composites as a basis for attachment of implants to bone. J Bone Joint Surg Am (1971) 1.48
Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium. Biomaterials (2001) 1.38
Structure, metallurgy, and mechanical properties of a porous tantalum foam. J Biomed Mater Res (2001) 1.37
Processing and biocompatibility evaluation of laser processed porous titanium. Acta Biomater (2007) 1.29
Fibrous tissue ingrowth and attachment to porous tantalum. J Biomed Mater Res (2000) 1.24
Low stiffness porous Ti structures for load-bearing implants. Acta Biomater (2007) 1.22
Bonding of alkali- and heat-treated tantalum implants to bone. J Biomed Mater Res (2000) 1.19
Direct laser processing of a tantalum coating on titanium for bone replacement structures. Acta Biomater (2009) 1.19
Functionally graded Co-Cr-Mo coating on Ti-6Al-4V alloy structures. Acta Biomater (2007) 1.19
Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants. Acta Biomater (2007) 1.14
Mechanism of bonelike apatite formation on bioactive tantalum metal in a simulated body fluid. Biomaterials (2002) 1.12
The fatigue strength of porous-coated Ti-6%Al-4%V implant alloy. J Biomed Mater Res (1985) 1.11
Role of surface charge and wettability on early stage mineralization and bone cell-materials interactions of polarized hydroxyapatite. Acta Biomater (2009) 1.08
Fatigue properties of carbon- and porous-coated Ti-6Al-4V alloy. J Biomed Mater Res (1984) 1.07
Macroscopic and microscopic evidence of prosthetic fixation with porous-coated materials. Clin Orthop Relat Res (1988) 1.01
Application of laser engineered net shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants. J Mater Sci Mater Med (2008) 0.98
Laser-assisted Zr/ZrO(2) coating on Ti for load-bearing implants. Acta Biomater (2009) 0.97
Fabrication of porous NiTi shape memory alloy structures using laser engineered net shaping. J Biomed Mater Res B Appl Biomater (2009) 0.97
Surface analyses of micro-arc oxidized and hydrothermally treated titanium and effect on osteoblast behavior. J Biomed Mater Res A (2004) 0.94
Fabrication of compositionally and structurally graded Ti-TiO2 structures using laser engineered net shaping (LENS). Acta Biomater (2009) 0.89
Electrically polarized HAp-coated Ti: in vitro bone cell-material interactions. Acta Biomater (2009) 0.89
A parametric study of the factors affecting the fatigue strength of porous coated Ti-6A1-4V implant alloy. J Biomed Mater Res (1990) 0.82
Tissue growth into porous primary and revision femoral stems. J Arthroplasty (1991) 0.80
Recent advances in bone tissue engineering scaffolds. Trends Biotechnol (2012) 2.13
Surface modifications and cell-materials interactions with anodized Ti. Acta Biomater (2007) 1.55
Effects of acute supplementation of caffeine on cardiorespiratory responses during endurance running in a hot & humid climate. Indian J Med Res (2010) 1.43
Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds. Dent Mater (2011) 1.30
Processing and biocompatibility evaluation of laser processed porous titanium. Acta Biomater (2007) 1.29
Synthesis and characterization of tricalcium phosphate with Zn and Mg based dopants. J Mater Sci Mater Med (2008) 1.26
Low stiffness porous Ti structures for load-bearing implants. Acta Biomater (2007) 1.22
Direct laser processing of a tantalum coating on titanium for bone replacement structures. Acta Biomater (2009) 1.19
Functionally graded Co-Cr-Mo coating on Ti-6Al-4V alloy structures. Acta Biomater (2007) 1.19
TiO2 nanotubes on Ti: Influence of nanoscale morphology on bone cell-materials interaction. J Biomed Mater Res A (2009) 1.18
Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants. Acta Biomater (2007) 1.14
Surface coatings for improvement of bone cell materials and antimicrobial activities of Ti implants. J Biomed Mater Res B Appl Biomater (2008) 1.13
Understanding the influence of MgO and SrO binary doping on the mechanical and biological properties of beta-TCP ceramics. Acta Biomater (2010) 1.11
Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants. Acta Biomater (2009) 1.10
Role of surface charge and wettability on early stage mineralization and bone cell-materials interactions of polarized hydroxyapatite. Acta Biomater (2009) 1.08
Understanding in vivo response and mechanical property variation in MgO, SrO and SiO₂ doped β-TCP. Bone (2011) 1.08
Nanocrystalline hydroxyapatite: micelle templated synthesis and characterization. Langmuir (2005) 1.08
Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering. J Tissue Eng Regen Med (2012) 1.07
HDPE-Al2O3-HAp composites for biomedical applications: processing and characterizations. J Biomed Mater Res B Appl Biomater (2009) 1.04
Antibacterial and biological characteristics of silver containing and strontium doped plasma sprayed hydroxyapatite coatings. Acta Biomater (2012) 1.00
Reverse micelle-mediated synthesis of calcium phosphate nanocarriers for controlled release of bovine serum albumin. Acta Biomater (2009) 0.98
Application of laser engineered net shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants. J Mater Sci Mater Med (2008) 0.98
Validity of Queen's College Step Test for estimation of maximum oxygen uptake in female students. Indian J Med Res (2005) 0.97
Laser-assisted Zr/ZrO(2) coating on Ti for load-bearing implants. Acta Biomater (2009) 0.97
Fabrication of porous NiTi shape memory alloy structures using laser engineered net shaping. J Biomed Mater Res B Appl Biomater (2009) 0.97
Osteoprecursor cell response to strontium-containing hydroxyapatite ceramics. J Biomed Mater Res A (2006) 0.97
Induction plasma sprayed Sr and Mg doped nano hydroxyapatite coatings on Ti for bone implant. J Biomed Mater Res B Appl Biomater (2011) 0.96
Influence of TiO2 and Ag2O addition on tricalcium phosphate ceramics. J Biomed Mater Res A (2007) 0.94
Understanding of dopant-induced osteogenesis and angiogenesis in calcium phosphate ceramics. Trends Biotechnol (2013) 0.93
Mechanical, in vitro antimicrobial, and biological properties of plasma-sprayed silver-doped hydroxyapatite coating. ACS Appl Mater Interfaces (2012) 0.93
Electrically polarized biphasic calcium phosphates: adsorption and release of bovine serum albumin. Langmuir (2010) 0.91
Induction Plasma Sprayed Nano Hydroxyapatite Coatings on Titanium for Orthopaedic and Dental Implants. Surf Coat Technol (2011) 0.91
Polycaprolactone coated porous tricalcium phosphate scaffolds for controlled release of protein for tissue engineering. J Biomed Mater Res B Appl Biomater (2009) 0.91
Zn- and Mg-doped hydroxyapatite nanoparticles for controlled release of protein. Langmuir (2010) 0.91
Compositionally graded hydroxyapatite/tricalcium phosphate coating on Ti by laser and induction plasma. Acta Biomater (2010) 0.89
Fabrication of compositionally and structurally graded Ti-TiO2 structures using laser engineered net shaping (LENS). Acta Biomater (2009) 0.89
Electrically polarized HAp-coated Ti: in vitro bone cell-material interactions. Acta Biomater (2009) 0.89
Microwave-processed nanocrystalline hydroxyapatite: simultaneous enhancement of mechanical and biological properties. Acta Biomater (2010) 0.89
SiO2 and ZnO dopants in three-dimensionally printed tricalcium phosphate bone tissue engineering scaffolds enhance osteogenesis and angiogenesis in vivo. Acta Biomater (2013) 0.88
ZnO, SiO2, and SrO doping in resorbable tricalcium phosphates: Influence on strength degradation, mechanical properties, and in vitro bone-cell material interactions. J Biomed Mater Res B Appl Biomater (2012) 0.88
Mesoporous calcium silicate for controlled release of bovine serum albumin protein. Acta Biomater (2009) 0.88
In vitro antimicrobial and biological properties of laser assisted tricalcium phosphate coating. Mater Sci Eng C Mater Biol Appl (2009) 0.88
Photoluminescence of dense nanocrystalline titanium dioxide thin films: effect of doping and thickness and relation to gas sensing. ACS Appl Mater Interfaces (2011) 0.87
Processing and characterization of porous alumina scaffolds. J Mater Sci Mater Med (2002) 0.87
In vitro biological and tribological properties of transparent magnesium aluminate (Spinel) and aluminum oxynitride (ALON®). J Mater Sci Mater Med (2011) 0.87
Antimicrobial Particulate Silver Coatings on Stainless Steel Implants for Fracture Management. Mater Sci Eng C Mater Biol Appl (2012) 0.85
Piezoelectric micromachined ultrasonic transducers: modeling the influence of structural parameters on device performance. IEEE Trans Ultrason Ferroelectr Freq Control (2005) 0.85
Osteoclastogenesis and osteoclastic resorption of tricalcium phosphate: effect of strontium and magnesium doping. J Biomed Mater Res A (2012) 0.84
Polycaprolactone-coated 3D printed tricalcium phosphate scaffolds for bone tissue engineering: in vitro alendronate release behavior and local delivery effect on in vivo osteogenesis. ACS Appl Mater Interfaces (2014) 0.84
Effects of Zinc and Strontium Substitution in Tricalcium Phosphate on Osteoclast Differentiation and Resorption. Biomater Sci (2013) 0.84
In vitro Wear Rate and Co Ion Release of Compositionally and Structurally Graded CoCrMo-Ti6Al4V Structures. Mater Sci Eng C Mater Biol Appl (2011) 0.83
Effect of electrical polarization and composition of biphasic calcium phosphates on early stage osteoblast interactions. J Biomed Mater Res B Appl Biomater (2011) 0.83
Skinfold thickness, body fat percentage and body mass index in obese and non-obese Indian boys. Asia Pac J Clin Nutr (2006) 0.83
SrO- and MgO-doped microwave sintered 3D printed tricalcium phosphate scaffolds: mechanical properties and in vivo osteogenesis in a rabbit model. J Biomed Mater Res B Appl Biomater (2014) 0.82
Laser processed TiN reinforced Ti6Al4V composite coatings. J Mech Behav Biomed Mater (2011) 0.81
Understanding bioactivity and polarizability of hydroxyapatite doped with tungsten. J Biomed Mater Res B Appl Biomater (2012) 0.81
Investigation of In Vitro Bone Cell Adhesion and Proliferation on Ti Using Direct Current Stimulation. Mater Sci Eng C Mater Biol Appl (2012) 0.81
Bone cell-materials interaction on Si microchannels with bioinert coatings. Acta Biomater (2007) 0.81