Published in J Prosthet Dent on December 01, 1990
Microleakage evaluation of silorane based composite versus methacrylate based composite. J Conserv Dent (2010) 1.15
Clinical effectiveness of contemporary dentin bonding agents. J Conserv Dent (2010) 0.97
A 13-year clinical evaluation of two three-step etch-and-rinse adhesives in non-carious class-V lesions. Clin Oral Investig (2010) 0.97
Comparative analysis of the shrinkage stress of composite resins. J Appl Oral Sci (2008) 0.92
Two-year clinical performance of a packable posterior composite with and without a flowable composite liner. Clin Oral Investig (2003) 0.83
Transmission of composite polymerization contraction force through a flowable composite and a resin-modified glass ionomer cement. J Appl Oral Sci (2007) 0.81
In vitro evaluation of marginal and internal adaptation after occlusal stressing of indirect class II composite restorations with different resinous bases and interface treatments. "Post-fatigue adaptation of indirect composite restorations". Clin Oral Investig (2011) 0.81
Interaction morphology and bond strength of nanofilled simplified-step adhesives to acid etched dentin. Eur J Dent (2012) 0.80
Fracture Resistance of Endodontically-treated Maxillary Premolars Restored with Composite Resin along with Glass Fiber Insertion in Different Positions. J Dent Res Dent Clin Dent Prospects (2012) 0.80
A comparative analysis of restorative materials used in abfraction lesions in tooth with and without occlusal restoration: Three-dimensional finite element analysis. J Conserv Dent (2013) 0.77
Effects of pulp capping materials on fracture resistance of Class II composite restorations. Eur J Dent (2015) 0.77
Effect of adhesive layers on microshear bond strength of nanocomposite resin to dentin. J Clin Exp Dent (2017) 0.75
Marginal adaptation of ceramic and composite inlays in minimally invasive mod cavities. Clin Oral Investig (2013) 0.75
The effect of bonding and surface sealant application on postoperative sensitivity from posterior composites. J Istanb Univ Fac Dent (2015) 0.75
In vitro evaluation of marginal and internal adaptation of class II CAD/CAM ceramic restorations with different resinous bases and interface treatments. Clin Oral Investig (2015) 0.75
Microshear bond strength of Nano-Bond adhesive containing nanosized aluminum trioxide particles. J Orthod Sci (2017) 0.75
Setting stress in composite resin in relation to configuration of the restoration. J Dent Res (1987) 2.13
Myocardial infarction in pre-war Leeds. Lancet (1996) 1.93
The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res (1984) 1.89
Increased wall-to-wall curing contraction in thin bonded resin layers. J Dent Res (1989) 1.48
Protection from stress in bone and its effects. Experiments with stainless steel and plastic plates in dogs. J Bone Joint Surg Br (1976) 1.38
Complete marginal seal of Class V resin composite restorations effected by increased flexibility. J Dent Res (1990) 1.27
Quantitative determination of stress reduction by flow in composite restorations. Dent Mater (1990) 1.27
Polymerization contraction and conversion of light-curing BisGMA-based methacrylate resins. Biomaterials (1993) 1.26
Clinical significance of polymerization shrinkage of composite resins. J Prosthet Dent (1982) 1.18
Liquid-supported dentures. Part II: Clinical study, a preliminary report. J Prosthet Dent (1990) 1.18
True linear polymerization shrinkage of unfilled resins and composites determined with a linometer. Dent Mater (1993) 1.17
Relaxation of polymerization contraction stresses by flow in dental composites. J Dent Res (1984) 1.17
Relaxation of polymerization contraction shear stress by hygroscopic expansion. J Dent Res (1990) 1.16
Influence of light intensity on polymerization shrinkage and integrity of restoration-cavity interface. Eur J Oral Sci (1995) 1.14
Curing contraction of composites and glass-ionomer cements. J Prosthet Dent (1988) 1.07
Post-vaccinial encephalitis: Recovery Following Treatment with Intravenous Pentothal Sodium and Convalescent Serum. Arch Dis Child (1942) 1.07
Visco-elastic parameters of dental restorative materials during setting. J Dent Res (2000) 1.04
Influence of ceramic and cement thickness on the masking of various types of opaque posts. J Prosthet Dent (2000) 1.02
Polymerization contraction stress in thin resin composite layers as a function of layer thickness. Dent Mater (1997) 1.01
HPO2-4 content in enamel and artificial carious lesions. Calcif Tissue Res (1975) 1.01
Fracture resistance of endodontically-treated premolars adhesively restored. Am J Dent (1997) 1.00
Bonding efficiency and interfacial morphology of one-bottle adhesives to contaminated dentin surfaces. Am J Dent (1998) 0.99
Marginal sealing of curing contraction gaps in Class V composite resin restorations. J Dent Res (1988) 0.97
Light initiation of dental resins: dynamics of the polymerization. Biomaterials (1996) 0.96
The influence of surface roughness on porcelain strength. Dent Mater (2000) 0.93
A fluoride-releasing composite for dental applications. Dent Mater (2001) 0.92
The prevalence of Salmonellae in healthy cattle at slaughter. Vet Rec (1978) 0.92
Quantification and distribution of lymphocyte subsets and Langerhans cells in normal human oral mucosa and skin. J Oral Pathol Med (1989) 0.92
Unreacted methacrylate groups on the surfaces of composite resins. J Dent Res (1982) 0.92
3D-finite element analyses of cusp movements in a human upper premolar, restored with adhesive resin-based composites. J Biomech (2001) 0.90
Color dye for identification of incompletely cured composite resins. J Prosthet Dent (1984) 0.89
Interdiffusion of a traditional glass ionomer cement into conditioned dentin. Am J Dent (1997) 0.88
Setting stresses in composites for two different curing modes. Dent Mater (1993) 0.87
Role of hybridization on marginal leakage and bond strength. Am J Dent (2000) 0.87
Polydysplastic epidermolysis bullosa and deelopment of epidermal neoplasms. Arch Dermatol (1970) 0.87
Mapping of tubule and intertubule surface areas available for bonding in Class V and Class II preparations. J Dent (1997) 0.86
The effect of curing light variations on bulk curing and wall-to-wall quality of two types and various shades of resin composites. Dent Mater (1997) 0.86
Debonding of adhesively restored deep Class II MOD restorations after functional loading. Am J Dent (1999) 0.86
Resistance of cementum in Class II and V cavities to penetration by an adhesive system. Dent Mater (1997) 0.86
The effect of the photopolymerization method on the quality of composite resin samples. J Oral Rehabil (1998) 0.85
Early and long-term wear of conventional and resin-modified glass ionomers. J Dent Res (1996) 0.85
Dentin contamination protection after mechanical preparation for veneering. Am J Dent (1996) 0.85
Dual cure luting composites--Part II: Clinically related properties. J Oral Rehabil (1994) 0.85
The influence of water sorption on the development of setting shrinkage stress in traditional and resin-modified glass ionomer cements. Dent Mater (1995) 0.85
Sealing capacity of a resin-modified glass-ionomer and resin composite placed in vivo in Class 5 restorations. Oper Dent (1997) 0.84
T-lymphocyte and Langerhans cell distribution in normal and allergically induced oral mucosa in contact with nickel-containing dental alloys. J Oral Pathol (1988) 0.84
The influence of admixing microfiller to small-particle composite resin on wear, tensile strength, hardness, and surface roughness. J Dent Res (1989) 0.83
The influence of temperature on some physical properties of dental composites. J Oral Rehabil (1981) 0.83
The dependence of shrinkage stress reduction on porosity concentration in thin resin layers. J Dent Res (1992) 0.82
Glass-ionomer bases under posterior composites. J Esthet Dent (1994) 0.82
Effect of enamel pretreatments on bond strength of compomer. Dent Mater (2001) 0.82
Structural integrity of resin-modified glass ionomers as affected by the delay or omission of light activation. J Dent Res (1998) 0.82
Early marginal leakage and shear bond strength of adhesive restorative systems. Dent Mater (1990) 0.82
Stiffness increase during the setting of dental composite resins. J Dent Res (1987) 0.82
Effect of abrasion medium on wear of stress-bearing composites and amalgam in vitro. J Dent Res (1986) 0.82
Surface roughness of dental stone casts from alginate impressions. J Dent (1986) 0.82
Influence of compliance of the substrate materials on polymerization contraction stress in thin resin composite layers. Biomaterials (1997) 0.82
Influence of filler parameters on the mechanical coherence of dental restorative resin composites. Biomaterials (1996) 0.82
Measuring procedure for the determination of the three-dimensional shape of dentures. J Prosthet Dent (1979) 0.82
Demineralization of enamel in relation to the fluoride release of materials. Am J Dent (2001) 0.81
Expression of a human homeobox-containing gene is regulated by 1,25(OH)2D3 in bone cells. Biochim Biophys Acta (1993) 0.81
The relationship between test methodology and elastic behavior of composites. J Dent Res (1987) 0.81
Sealing ability of eight resin bonding systems in a Class II restoration after mechanical fatiguing. Dent Mater (1997) 0.81
Microhardness of sound, decalcified and etched tooth enamel related to the calcium content. Caries Res (1974) 0.80
Shear bond strength of four dentinal adhesives applied in vivo and in vitro. J Dent (1996) 0.80
In vivo resin-dentin interdiffusion and tag formation with lateral branches of two adhesive systems. J Prosthet Dent (1996) 0.80
Induction of tolerance with nondepleting anti-CD4 monoclonal antibodies is associated with down-regulation of TH2 cytokines. Transplantation (1997) 0.80
A modified dilatometer for continuous recording of volumetric polymerization shrinkage of composite restorative materials. J Dent (1981) 0.80
Spontaneous Hyperventilation Tetany. Br Med J (1940) 0.79
Clinical evaluation of fifty-six patients referred with symptoms tentatively related to allergic contact stomatitis. Oral Surg Oral Med Oral Pathol (1992) 0.79
Clinical evaluation of a one-bottle bonding system for desensitizing exposed roots. Am J Dent (1999) 0.79
Influence of enzymes and plaque acids on in vitro wear of dental composites. Biomaterials (1996) 0.79
The influence of shelf life and storage conditions on some properties of composite resins. J Prosthet Dent (1983) 0.79
Effect of two etching times on the sealing ability of Clearfil Liner Bond 2 in Class V restorations. Am J Dent (1997) 0.79
The curing pattern of photo-initiated dental composites. J Oral Rehabil (1980) 0.79
The influence of mixing ratio on the working time, strength and wear of composites. Aust Dent J (1989) 0.78
Resisting the curing contraction with adhesive composites. J Prosthet Dent (1986) 0.78
Dentin infiltration by three adhesive systems in clinical and laboratory conditions. Am J Dent (1996) 0.78
Silane treatment of filler and composite blending in a one-step procedure for dental restoratives. Biomaterials (1994) 0.78
Quantitative evaluation of the wear resistance of posterior dental restorations: a new three-dimensional measuring technique. J Dent (1984) 0.78
Structural changes in composite surface material after dry polishing. J Oral Rehabil (1981) 0.78
Sealing performance of Scotchbond Multi-Purpose-Z100 in Class II restorations. Am J Dent (1996) 0.78
In vitro flexural fatigue limits of dental composites. J Biomed Mater Res (1994) 0.78
Comparison of the marginal integrity of in vivo and in vitro Class II composite restorations. J Dent (1993) 0.77
Effect of mechanical load cycling on the marginal integrity of adhesive Class I resin composite restorations. J Dent (1996) 0.77
Shear bond strength determinations on various kinds of luting cements with tooth structure and cast alloys using a new testing device. J Dent (1987) 0.77
The relevance of controlled fluoride release with bonded orthodontic appliances. J Dent (1987) 0.77
The effect of various surface treatments on the shear strength between composite resin and glass-ionomer cement. J Dent (1989) 0.77
Influence of tissue characteristics at margins on leakage of Class II indirect porcelain restorations. Am J Dent (1999) 0.77
Annealing as a mechanism of increasing wear resistance of composites. Dent Mater (1990) 0.77
Sealing ability of two "compomers" applied with and without phosphoric acid treatment for Class V restorations in vivo. J Prosthet Dent (1998) 0.77
Shortcomings of composite resins in Class V restorations. J Esthet Dent (1989) 0.77
The role of collagen in the elastic properties of calcified tissues. J Biomech (1977) 0.77
Shear bond strength and microleakage of new dentin bonding systems. Am J Dent (1993) 0.77
Loss of surface enamel after acid etching procedures and its relation to fluoride content. Am J Orthod (1981) 0.77
Influence of shearing action of food on contact stress and subsequent wear of stress-bearing composites. J Dent Res (1993) 0.77
Calcium distribution in human and bovine surface enamel. Caries Res (1973) 0.77
Overhang of Class V composite resin restorations from hygroscopic expansion. Quintessence Int (1989) 0.76
Effects of cocaine on the human fetus: a review of clinical studies. DICP (1989) 0.76
Structural and physical factors affecting the brush wear of dental composites. J Dent (1985) 0.76