Published in J Arthroplasty on September 18, 2010
Safe clinical use of carbon nanotubes as innovative biomaterials. Chem Rev (2014) 0.98
Crack propagation resistance is similar under static and cyclic loading in crosslinked UHMWPE: a pilot study. Clin Orthop Relat Res (2011) 0.88
Backside Wear Is Not Dependent on the Acetabular Socket Design in Crosslinked Polyethylene Liners. Clin Orthop Relat Res (2016) 0.82
Application of viscoelastic fracture model and non-uniform crack initiation at clinically relevant notches in crosslinked UHMWPE. J Mech Behav Biomed Mater (2012) 0.81
Natural polyphenols enhance stability of crosslinked UHMWPE for joint implants. Clin Orthop Relat Res (2015) 0.79
Highly crosslinked polyethylene: a safe alternative to conventional polyethylene for dual mobility cup mobile component. A biomechanical validation. Int Orthop (2016) 0.78
Equivalent wear performance of dual mobility bearing compared with standard bearing in total hip arthroplasty: in vitro study. Int Orthop (2016) 0.77
Incarcerated fracture fragments of Longevity polyethylene liners after total hip arthroplasty. Arthroplast Today (2016) 0.75
Advances in hip arthroplasty surgery: what is justified? EFORT Open Rev (2017) 0.75
Wear of a sequentially annealed polyethylene acetabular liner. Acta Orthop (2014) 0.75
Viscoplastic crack initiation and propagation in crosslinked UHMWPE from clinically relevant notches up to 0.5mm radius. J Mech Behav Biomed Mater (2017) 0.75
Dislocations after total hip-replacement arthroplasties. J Bone Joint Surg Am (1978) 7.70
A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. Recipient of the 1999 HAP Paul Award. J Arthroplasty (2001) 2.29
Anteversion of the acetabular cup. Measurement of angle after total hip replacement. J Bone Joint Surg Br (1986) 1.85
Rim cracking of the cross-linked longevity polyethylene acetabular liner after total hip arthroplasty. J Bone Joint Surg Am (2007) 1.72
Impingement in total hip arthroplasty a study of retrieved acetabular components. J Arthroplasty (2005) 1.70
Deformation, yielding, fracture and fatigue behavior of conventional and highly cross-linked ultra high molecular weight polyethylene. Biomaterials (2005) 1.63
Fatigue crack propagation resistance of virgin and highly crosslinked, thermally treated ultra-high molecular weight polyethylene. Biomaterials (2005) 1.47
Clinical fracture of cross-linked UHMWPE acetabular liners. Biomaterials (2009) 1.35
Influence of femoral head size on impingement, dislocation and stress distribution in total hip replacement. Med Eng Phys (2006) 1.29
Recurrent dislocation after revision total hip replacement with a large prosthetic femoral head. A case report. J Bone Joint Surg Am (2004) 1.27
How prevalent are implant wear and osteolysis, and how has the scope of osteolysis changed since 2000? J Am Acad Orthop Surg (2008) 1.17
How do material properties influence wear and fracture mechanisms? J Am Acad Orthop Surg (2008) 0.94
Fairness to all: gender and sex in scientific reporting. Clin Orthop Relat Res (2013) 2.98
Editorial: Words hurt--avoiding dehumanizing language in orthopaedic research and practice. Clin Orthop Relat Res (2014) 2.46
Fatigue crack propagation resistance of virgin and highly crosslinked, thermally treated ultra-high molecular weight polyethylene. Biomaterials (2005) 1.47
Do ceramic femoral heads reduce taper fretting corrosion in hip arthroplasty? A retrieval study. Clin Orthop Relat Res (2013) 1.44
In vivo degradation of polyethylene liners after gamma sterilization in air. J Bone Joint Surg Am (2005) 1.43
Is increased modularity associated with increased fretting and corrosion damage in metal-on-metal total hip arthroplasty devices?: a retrieval study. J Arthroplasty (2013) 1.36
2006 Otto Aufranc Award Paper: significance of in vivo degradation for polyethylene in total hip arthroplasty. Clin Orthop Relat Res (2006) 1.23
Gamma inert sterilization: a solution to polyethylene oxidation? J Bone Joint Surg Am (2009) 1.13
Loss of cement-bone interlock in retrieved tibial components from total knee arthroplasties. Clin Orthop Relat Res (2013) 1.13
Polyethylene and titanium particles induce osteolysis by similar, lymphocyte-independent, mechanisms. J Orthop Res (2005) 1.08
Notch sensitivity of PEEK in monotonic tension. Biomaterials (2009) 1.00
Analysis of retrieved ultra-high-molecular-weight polyethylene tibial components from rotating-platform total knee arthroplasty. J Arthroplasty (2008) 0.99
Do first-generation highly crosslinked polyethylenes oxidize in vivo? Clin Orthop Relat Res (2011) 0.99
In vivo oxidation contributes to delamination but not pitting in polyethylene components for total knee arthroplasty. J Arthroplasty (2010) 0.97
Anisotropy and oxidative resistance of highly crosslinked UHMWPE after deformation processing by solid-state ram extrusion. Biomaterials (2006) 0.96
Editorial: Estimating survivorship in the face of competing risks. Clin Orthop Relat Res (2015) 0.96
The balance between endotoxin accumulation and clearance during particle-induced osteolysis in murine calvaria. J Orthop Res (2007) 0.95
The effect of gamma radiation sterilization on the fatigue crack propagation resistance of human cortical bone. J Bone Joint Surg Am (2004) 0.93
Compliance calibration for fatigue crack propagation testing of ultra high molecular weight polyethylene. Biomaterials (2006) 0.92
Lipopolysaccharide found in aseptic loosening of patients with inflammatory arthritis. Clin Orthop Relat Res (2006) 0.92
Clinical and histologic results related to a low-modulus composite total hip replacement stem. J Bone Joint Surg Am (2006) 0.92
Reasons for revision of first-generation highly cross-linked polyethylenes. J Arthroplasty (2010) 0.91
Active management of financial conflicts of interest on the Editorial Board of CORR. Clin Orthop Relat Res (2013) 0.91
Evaluation of contemporary software methods used to quantify polyethylene wear after total hip arthroplasty. J Bone Joint Surg Am (2003) 0.91
Does vitamin E-stabilized ultrahigh-molecular-weight polyethylene address concerns of cross-linked polyethylene in total knee arthroplasty? J Arthroplasty (2011) 0.90
Zirconia versus Co-Cr femoral heads in total hip arthroplasty: early assessment of wear. Clin Orthop Relat Res (2006) 0.90
Reassessment of computerized wear measurement for total hip arthroplasty with correction for projectional image distortion: a brief follow-up report. J Bone Joint Surg Am (2010) 0.90
Predictors of range of motion in patients undergoing manipulation after TKA. Clin Orthop Relat Res (2013) 0.89
Retrieval analysis of Harris-Galante I and II acetabular liners in situ for more than 10 years. Acta Orthop (2012) 0.89
Incidence of postthrombotic syndrome in patients undergoing primary total knee arthroplasty for osteoarthritis. Clin Orthop Relat Res (2009) 0.89
Crack propagation resistance is similar under static and cyclic loading in crosslinked UHMWPE: a pilot study. Clin Orthop Relat Res (2011) 0.88
On the assessment of oxidative and microstructural changes after in vivo degradation of historical UHMWPE knee components by means of vibrational spectroscopies and nanoindentation. J Biomed Mater Res A (2009) 0.88
Effect of transforming growth factor beta 2 on marrow-infused foam poly(propylene fumarate) tissue-engineered constructs for the repair of critical-size cranial defects in rabbits. Tissue Eng (2005) 0.88
Isolated resurfacing of the previously unresurfaced patella total knee arthroplasty. J Arthroplasty (2009) 0.88
Notched stress-strain behavior of a conventional and a sequentially annealed highly crosslinked UHMWPE. Biomaterials (2008) 0.87
Management of the deficient patella in revision total knee arthroplasty. Clin Orthop Relat Res (2008) 0.87
Oxidative properties and surface damage mechanisms of remelted highly crosslinked polyethylenes in total knee arthroplasty. Int Orthop (2013) 0.87
Clinical, surface damage and oxidative performance of poly II tibial inserts after long-term implantation. J Long Term Eff Med Implants (2008) 0.86
Large deformation compression induced crystallinity degradation of conventional and highly crosslinked UHMWPEs. Biomaterials (2005) 0.84
Incidence of postthrombotic syndrome in patients undergoing primary total hip arthroplasty for osteoarthritis. Clin Orthop Relat Res (2011) 0.82
Relationship between damage accumulation and mechanical property degradation in cortical bone: microcrack orientation is important. J Biomed Mater Res A (2003) 0.82
Is there material loss at the backside taper in modular CoCr acetabular liners? Clin Orthop Relat Res (2014) 0.82
Application of viscoelastic fracture model and non-uniform crack initiation at clinically relevant notches in crosslinked UHMWPE. J Mech Behav Biomed Mater (2012) 0.81
Post damage in contemporary posterior-stabilized tibial inserts: influence of implant design and clinical relevance. J Arthroplasty (2011) 0.81
Backside wear of Miller-Galante I and Insall-Burstein II tibial inserts. Clin Orthop Relat Res (2004) 0.81
Revision total knee arthroplasty for aseptic and septic causes in patients with rheumatoid arthritis. Clin Orthop Relat Res (2010) 0.79
Irradiation does not modify mechanical properties of cancellous bone under compression. Clin Orthop Relat Res (2012) 0.78
In vitro degradation and fracture toughness of multilayered porous poly(propylene fumarate)/beta-tricalcium phosphate scaffolds. J Biomed Mater Res (2002) 0.78
Notched fatigue behavior of PEEK. Biomaterials (2010) 0.76
Revision of hip resurfacing arthroplasty. Am J Orthop (Belle Mead NJ) (2010) 0.76
Editorial: arthroplasty devices: registries and beyond. Clin Orthop Relat Res (2014) 0.75
Isolated all-polyethylene patellar revisions for metal-backed patellar failure. Clin Orthop Relat Res (2008) 0.75
Near-terminal creep damage does not substantially influence fatigue life under physiological loading. J Biomech (2011) 0.75
Monotonic and fatigue behavior of five clinically relevant conventional and highly crosslinked UHMWPEs in the presence of stress concentrations. J Mech Behav Biomed Mater (2013) 0.75
Editorial: Opposites Attract at CORR®-Machine Learning and Qualitative Research. Clin Orthop Relat Res (2020) 0.75
Retention of superficially damaged femoral components after metal-backed patella component failure. J Arthroplasty (2008) 0.75