Degradable segmented polyurethane elastomers for bone tissue engineering: effect of polycaprolactone content.

PubWeight™: 0.75‹?›

🔗 View Article (PMID 22304961)

Published in J Biomater Sci Polym Ed on May 11, 2012

Authors

Katherine D Kavlock1, Kyumin Whang, Scott A Guelcher, Aaron S Goldstein

Author Affiliations

1: School of Biomedical Engineering and Sciences, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061-0211, USA.

Articles cited by this

Analysis of relative gene expression data using real-time quantitative PCR and the 2(-Delta Delta C(T)) Method. Methods (2001) 414.27

Matrix elasticity directs stem cell lineage specification. Cell (2006) 43.00

Specific proteins mediate enhanced osteoblast adhesion on nanophase ceramics. J Biomed Mater Res (2000) 2.80

Synthesis, characterization, and cytocompatibility of elastomeric, biodegradable poly(ester-urethane)ureas based on poly(caprolactone) and putrescine. J Biomed Mater Res (2002) 2.49

Effect of titanium surface roughness on proliferation, differentiation, and protein synthesis of human osteoblast-like cells (MG63). J Biomed Mater Res (1995) 2.43

Effect of convection on osteoblastic cell growth and function in biodegradable polymer foam scaffolds. Biomaterials (2001) 1.94

Surface roughness modulates the local production of growth factors and cytokines by osteoblast-like MG-63 cells. J Biomed Mater Res (1996) 1.77

Effect of fiber diameter and orientation on fibroblast morphology and proliferation on electrospun poly(D,L-lactic-co-glycolic acid) meshes. Biomaterials (2006) 1.75

Intrinsic mechanical properties of the extracellular matrix affect the behavior of pre-osteoblastic MC3T3-E1 cells. Am J Physiol Cell Physiol (2006) 1.60

Influence of substratum surface chemistry/energy and topography on the human fetal osteoblastic cell line hFOB 1.19: Phenotypic and genotypic responses observed in vitro. Biomaterials (2007) 1.38

Fluid flow stimulates expression of osteopontin and bone sialoprotein by bone marrow stromal cells in a temporally dependent manner. Bone (2005) 1.37

Human foetal osteoblastic cell response to polymer-demixed nanotopographic interfaces. J R Soc Interface (2005) 1.34

Effect of the conformation and orientation of adsorbed fibronectin on endothelial cell spreading and the strength of adhesion. J Biomed Mater Res (1993) 1.28

Differential regulation of osteoblasts by substrate microstructural features. Biomaterials (2005) 1.27

Effect of dexamethasone withdrawal on osteoblastic differentiation of bone marrow stromal cells. J Cell Biochem (2003) 1.26

Myoblast proliferation and differentiation on fibronectin-coated self assembled monolayers presenting different surface chemistries. Biomaterials (2004) 1.25

Modulating fibroblast adhesion, spreading, and proliferation using self-assembled monolayer films of alkylthiolates on gold. J Biomed Mater Res (2000) 1.24

The regulation of osteogenesis by ECM rigidity in MC3T3-E1 cells requires MAPK activation. J Cell Physiol (2007) 1.20

In vitro localization of bone growth factors in constructs of biodegradable scaffolds seeded with marrow stromal cells and cultured in a flow perfusion bioreactor. Tissue Eng (2006) 1.15

In vitro and in vivo evaluation of a novel nanosize hydroxyapatite particles/poly(ester-urethane) composite scaffold for bone tissue engineering. Acta Biomater (2009) 1.11

Synthesis and characterization of an injectable allograft bone/polymer composite bone void filler with tunable mechanical properties. Tissue Eng Part A (2010) 1.08

Characterization of the degradation mechanisms of lysine-derived aliphatic poly(ester urethane) scaffolds. Biomaterials (2010) 1.08

Synthesis, mechanical properties, biocompatibility, and biodegradation of polyurethane networks from lysine polyisocyanates. Biomaterials (2008) 1.03

In vitro degradation and erosion of degradable, segmented polyurethanes containing an amino acid-based chain extender. J Biomater Sci Polym Ed (2001) 0.98

The dependence of MG63 osteoblast responses to (meth)acrylate-based networks on chemical structure and stiffness. Biomaterials (2010) 0.94

Systematic variation in osteoblast adhesion and phenotype with substratum surface characteristics. J Biomed Mater Res A (2004) 0.92

Synthesis and characterization of segmented poly(esterurethane urea) elastomers for bone tissue engineering. Acta Biomater (2007) 0.92

Analysis of the osteoinductive capacity and angiogenicity of an in vitro generated extracellular matrix. J Biomed Mater Res A (2009) 0.89

Influence of perfusion and compression on the proliferation and differentiation of bone mesenchymal stromal cells seeded on polyurethane scaffolds. Biomaterials (2011) 0.88

Effect of seeding osteoprogenitor cells as dense clusters on cell growth and differentiation. Tissue Eng (2001) 0.88

Growth of human osteoblast-like cells on alkanethiol on gold self-assembled monolayers: the effect of surface chemistry. J Biomed Mater Res (1998) 0.88

Synthesis, characterization, and remodeling of weight-bearing allograft bone/polyurethane composites in the rabbit. Acta Biomater (2010) 0.87

In vitro evaluation of osteoblastic differentiation on amorphous calcium phosphate-decorated poly(lactic-co-glycolic acid) scaffolds. J Tissue Eng Regen Med (2010) 0.83

Candidate bone-tissue-engineered product based on human-bone-derived cells and polyurethane scaffold. Acta Biomater (2009) 0.83

Effect of pulse frequency on the osteogenic differentiation of mesenchymal stem cells in a pulsatile perfusion bioreactor. J Biomech Eng (2011) 0.82

Expression of bone morphogenic proteins and receptors at the injured growth plate cartilage in young rats. J Histochem Cytochem (2006) 0.81

A novel approach to control growth, orientation, and shape of human osteoblasts. Tissue Eng Part A (2008) 0.81

Physicochemical and biological properties of nano-hydroxyapatite-reinforced aliphatic polyurethanes membranes. J Biomater Sci Polym Ed (2010) 0.78

Effects of surface chemistry prepared by self-assembled monolayers on osteoblast behavior. J Biomed Mater Res A (2010) 0.77

Articles by these authors

Effect of fiber diameter and orientation on fibroblast morphology and proliferation on electrospun poly(D,L-lactic-co-glycolic acid) meshes. Biomaterials (2006) 1.75

Effect of fiber diameter on spreading, proliferation, and differentiation of osteoblastic cells on electrospun poly(lactic acid) substrates. Biomaterials (2005) 1.73

Sustained local delivery of siRNA from an injectable scaffold. Biomaterials (2011) 1.69

Development of an antimicrobial resin--a pilot study. Dent Mater (2010) 1.43

Fluid flow stimulates expression of osteopontin and bone sialoprotein by bone marrow stromal cells in a temporally dependent manner. Bone (2005) 1.37

Effect of dexamethasone withdrawal on osteoblastic differentiation of bone marrow stromal cells. J Cell Biochem (2003) 1.26

Effect of fiber diameter and alignment of electrospun polyurethane meshes on mesenchymal progenitor cells. Tissue Eng Part A (2009) 1.23

Computational predictions of the tensile properties of electrospun fibre meshes: effect of fibre diameter and fibre orientation. J Mech Behav Biomed Mater (2008) 1.22

Injectable biodegradable polyurethane scaffolds with release of platelet-derived growth factor for tissue repair and regeneration. Pharm Res (2008) 1.18

Polypyrrole-coated electrospun PLGA nanofibers for neural tissue applications. Biomaterials (2009) 1.18

The effect of the local delivery of platelet-derived growth factor from reactive two-component polyurethane scaffolds on the healing in rat skin excisional wounds. Biomaterials (2009) 1.18

Sustained release of vancomycin from polyurethane scaffolds inhibits infection of bone wounds in a rat femoral segmental defect model. J Control Release (2010) 1.12

Dependence of invadopodia function on collagen fiber spacing and cross-linking: computational modeling and experimental evidence. Biophys J (2008) 1.09

Synthesis and characterization of an injectable allograft bone/polymer composite bone void filler with tunable mechanical properties. Tissue Eng Part A (2010) 1.08

Improving bone formation in a rat femur segmental defect by controlling bone morphogenetic protein-2 release. Tissue Eng Part A (2011) 1.08

Characterization of the degradation mechanisms of lysine-derived aliphatic poly(ester urethane) scaffolds. Biomaterials (2010) 1.08

Calcium phosphate ceramics in bone tissue engineering: a review of properties and their influence on cell behavior. Acta Biomater (2013) 1.07

Sensing and modulation of invadopodia across a wide range of rigidities. Biophys J (2011) 1.05

Synthesis of biocompatible segmented polyurethanes from aliphatic diisocyanates and diurea diol chain extenders. Acta Biomater (2005) 1.05

The effects of rhBMP-2 released from biodegradable polyurethane/microsphere composite scaffolds on new bone formation in rat femora. Biomaterials (2009) 1.05

Effect of intermittent shear stress on mechanotransductive signaling and osteoblastic differentiation of bone marrow stromal cells. Tissue Eng Part A (2008) 1.04

Matrix rigidity induces osteolytic gene expression of metastatic breast cancer cells. PLoS One (2010) 1.03

Effects of local delivery of D-amino acids from biofilm-dispersive scaffolds on infection in contaminated rat segmental defects. Biomaterials (2013) 1.03

Tunable delivery of siRNA from a biodegradable scaffold to promote angiogenesis in vivo. Adv Mater (2013) 1.01

Enhanced polarization of embryonic hippocampal neurons on micron scale electrospun fibers. J Biomed Mater Res A (2010) 0.99

Injectable reactive biocomposites for bone healing in critical-size rabbit calvarial defects. Biomed Mater (2012) 0.95

Electrospun fibre diameter, not alignment, affects mesenchymal stem cell differentiation into the tendon/ligament lineage. J Tissue Eng Regen Med (2012) 0.95

Pro-angiogenic and anti-inflammatory regulation by functional peptides loaded in polymeric implants for soft tissue regeneration. Tissue Eng Part A (2012) 0.93

Antimicrobial acrylic materials with in situ generated silver nanoparticles. J Biomed Mater Res B Appl Biomater (2011) 0.92

Synthesis and characterization of segmented poly(esterurethane urea) elastomers for bone tissue engineering. Acta Biomater (2007) 0.92

Balancing the rates of new bone formation and polymer degradation enhances healing of weight-bearing allograft/polyurethane composites in rabbit femoral defects. Tissue Eng Part A (2013) 0.90

Measuring differences in compositional properties of bone tissue by confocal Raman spectroscopy. Calcif Tissue Int (2011) 0.90

Hydrodynamic shear stimulates osteocalcin expression but not proliferation of bone marrow stromal cells. Tissue Eng (2004) 0.90

Injectable polyurethane composite scaffolds delay wound contraction and support cellular infiltration and remodeling in rat excisional wounds. J Biomed Mater Res A (2011) 0.89

Fabrication of a model continuously graded co-electrospun mesh for regeneration of the ligament-bone interface. Acta Biomater (2011) 0.89

Biocompatibility and chemical reaction kinetics of injectable, settable polyurethane/allograft bone biocomposites. Acta Biomater (2012) 0.88

Bone structural components regulating sites of tumor metastasis. Curr Osteoporos Rep (2011) 0.88

Wnt signaling induces gene expression of factors associated with bone destruction in lung and breast cancer. Clin Exp Metastasis (2014) 0.87

Effect of low-frequency pulsatile flow on expression of osteoblastic genes by bone marrow stromal cells. Ann Biomed Eng (2009) 0.87

Synthetic and tissue-derived models for studying rigidity effects on invadopodia activity. Methods Mol Biol (2013) 0.87

Synthesis, characterization, and remodeling of weight-bearing allograft bone/polyurethane composites in the rabbit. Acta Biomater (2010) 0.87

Dual delivery of an antibiotic and a growth factor addresses both the microbiological and biological challenges of contaminated bone fractures. Expert Opin Drug Deliv (2011) 0.87

Nerve growth factor-immobilized electrically conducting fibrous scaffolds for potential use in neural engineering applications. IEEE Trans Nanobioscience (2011) 0.85

Functional tissue engineering requires bioreactor strategies. Tissue Eng Part A (2009) 0.84

Effects of the analgesic acetaminophen (Paracetamol) and its para-aminophenol metabolite on viability of mouse-cultured cortical neurons. Basic Clin Pharmacol Toxicol (2011) 0.84

Osteoblast response to zirconia-hybridized pyrophosphate-stabilized amorphous calcium phosphate. J Biomed Mater Res A (2006) 0.83

In vitro evaluation of osteoblastic differentiation on amorphous calcium phosphate-decorated poly(lactic-co-glycolic acid) scaffolds. J Tissue Eng Regen Med (2010) 0.83

Effect of pulse frequency on the osteogenic differentiation of mesenchymal stem cells in a pulsatile perfusion bioreactor. J Biomech Eng (2011) 0.82

Local delivery of tobramycin from injectable biodegradable polyurethane scaffolds. J Biomater Sci Polym Ed (2010) 0.82

A novel antimicrobial orthodontic band cement with in situ-generated silver nanoparticles. Angle Orthod (2014) 0.81

Synthesis, characterization of calcium phosphates/polyurethane composites for weight-bearing implants. J Biomed Mater Res B Appl Biomater (2011) 0.81

Local injection of lovastatin in biodegradable polyurethane scaffolds enhances bone regeneration in a critical-sized segmental defect in rat femora. J Tissue Eng Regen Med (2012) 0.81

Biomaterial scaffolds for treating osteoporotic bone. Curr Osteoporos Rep (2014) 0.80

Response of bone marrow stromal cells to graded co-electrospun scaffolds and its implications for engineering the ligament-bone interface. Biomaterials (2012) 0.80

Gel microstructure regulates proliferation and differentiation of MC3T3-E1 cells encapsulated in alginate beads. Acta Biomater (2012) 0.80

Fabrication and characterization of poly(lactic-co-glycolic acid) microsphere/amorphous calcium phosphate scaffolds. J Tissue Eng Regen Med (2011) 0.79

Effect of soluble zinc on differentiation of osteoprogenitor cells. J Biomed Mater Res A (2007) 0.78

Modulation of protein adsorption and cell adhesion by poly(allylamine hydrochloride) heparin films. Biomaterials (2005) 0.78

Electrospun meshes possessing region-wise differences in fiber orientation, diameter, chemistry and mechanical properties for engineering bone-ligament-bone tissues. Biotechnol Bioeng (2014) 0.77

Hydrogel-electrospun mesh composites for coronary artery bypass grafts. Tissue Eng Part C Methods (2011) 0.77

Design and development of reactive injectable and settable polymeric biomaterials. J Biomed Mater Res A (2013) 0.77

Development of a low-color, color stable, dual cure dental resin. Dent Mater (2013) 0.77

Biodegradable lysine-derived polyurethane scaffolds promote healing in a porcine full-thickness excisional wound model. J Biomater Sci Polym Ed (2014) 0.77

Elucidation of adhesion-dependent spontaneous apoptosis in macrophages using phase separated PEG/polyurethane films. Acta Biomater (2012) 0.76

Static and cyclic mechanical loading of mesenchymal stem cells on elastomeric, electrospun polyurethane meshes. J Biomech Eng (2015) 0.76

Cellularized cylindrical fiber/hydrogel composites for ligament tissue engineering. Biomacromolecules (2013) 0.75

Effect of pulsatile flow on the osteogenic differentiation of bone marrow stromal cells in porous scaffolds. Biomed Sci Instrum (2008) 0.75

Fabrication and characterization of poly(DL-lactic-co-glycolic acid)/zirconia-hybridized amorphous calcium phosphate composites. J Biomater Sci Polym Ed (2006) 0.75

Injectable foams for regenerative medicine. Wiley Interdiscip Rev Nanomed Nanobiotechnol (2013) 0.75

A sustained release of lovastatin from biodegradable, elastomeric polyurethane scaffolds for enhanced bone regeneration. Tissue Eng Part A (2010) 0.75

Two-particle dynamics on an electrode in ac electric fields. Adv Colloid Interface Sci (2002) 0.75

Composite Resin Sealants Are More Cost and Time-Effective than Glass lonomer Sealants (UT CAT #2783). Tex Dent J (2015) 0.75