Published in J Appl Oral Sci on January 18, 2013
Setting stress in composite resin in relation to configuration of the restoration. J Dent Res (1987) 2.13
Reduction of polymerization contraction stress for dental composites by two-step light-activation. Dent Mater (2002) 1.84
Clinical significance of polymerization shrinkage of composite resins. J Prosthet Dent (1982) 1.18
Effect of sequential versus continuous irradiation of a light-cured resin composite on shrinkage, viscosity, adhesion, and degree of polymerization. Am J Dent (1998) 1.13
An alternative method to reduce polymerization shrinkage in direct posterior composite restorations. J Am Dent Assoc (2002) 1.02
Marginal adaptation of a restorative resin polymerized at reduced rate. Scand J Dent Res (1991) 1.01
Wear resistance of packable resin composites after simulated toothbrushing test. J Esthet Restor Dent (2004) 0.99
Pulse activation: reducing resin-based composite contraction stresses at the enamel cavosurface margins. Am J Dent (1999) 0.95
Contraction force rate of polymer composites is linearly correlated with irradiance. Dent Mater (2004) 0.94
In vitro measurement of cuspal strain and displacement in composite restored teeth. J Dent (1997) 0.87
Effects of polymerization contraction in composite restorations. J Dent (1992) 0.86
Effect of different modes of light curing and resin composites on microleakage of Class II restorations--Part II. Odontostomatol Trop (2009) 0.86
Effect of composite type, light intensity, configuration factor and laser polymerization on polymerization contraction forces. Am J Dent (1997) 0.86
Effect of ramped light intensity on polymerization force and conversion in a photoactivated composite. J Esthet Dent (2000) 0.86
Shrinkage stress in light-cured composite resins: influence of material and photoactivation mode. Dent Mater (2006) 0.86
Polymerization contraction of resin composite vs. energy and power density of light-cure. Eur J Oral Sci (2005) 0.84
Early marginal leakage and shear bond strength of adhesive restorative systems. Dent Mater (1990) 0.82
Transmission of composite polymerization contraction force through a flowable composite and a resin-modified glass ionomer cement. J Appl Oral Sci (2007) 0.81
Novel approach to measure composite conversion kinetics during exposure with stepped or continuous light-curing. J Esthet Dent (1999) 0.81
The influence of plasma arc vs. halogen standard or soft-start irradiation on polymerization shrinkage kinetics of polymer matrix composites. J Dent (2003) 0.80
Influence of C-factor and light-curing mode on gap formation in resin composite restorations. Oper Dent (2009) 0.78
A review of the curing mechanics of composites and their significance in dental applications. Compend Contin Educ Dent Suppl (1999) 0.77
Role of additional retention on marginal adaptation and sealing of large resin composite Class II restorations. Oper Dent (2007) 0.77
The effects of occlusal loading on the margins of cervical restorations. J Am Dent Assoc (2009) 2.14
Influence of pH environment on polymer based dental material properties. J Dent (2005) 1.01
Wear resistance of packable resin composites after simulated toothbrushing test. J Esthet Restor Dent (2004) 0.99
Effect of caries preventive measures directed to expectant mothers on caries experience in their children. Braz Dent J (2003) 0.94
Compromised bond strength after root dentin deproteinization reversed with ascorbic acid. J Endod (2010) 0.92
Comparative analysis of the shrinkage stress of composite resins. J Appl Oral Sci (2008) 0.92
Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins. J Appl Oral Sci (2008) 0.91
Influence of pulse-delay curing on sorption and solubility of a composite resin. J Appl Oral Sci (2009) 0.90
Evaluation of Class I ART restorations in Brazilian schoolchildren: three-year results. Spec Care Dentist (2004) 0.87
Evaluation of internal adaptation of Class V resin composite restorations using three techniques of polymerization. J Appl Oral Sci (2007) 0.86
Impact of filler size and distribution on roughness and wear of composite resin after simulated toothbrushing. J Appl Oral Sci (2012) 0.86
Two-year clinical evaluation of resinous restorative systems in non-carious cervical lesions. Braz Dent J (2010) 0.85
One-year clinical evaluation of tooth-colored materials in non-carious cervical lesions. J Appl Oral Sci (2003) 0.84
Volumetric polymerization shrinkage of contemporary composite resins. J Appl Oral Sci (2007) 0.83
Water sorption and solubility of different calcium hydroxide cements. J Appl Oral Sci (2009) 0.83
Transmission of composite polymerization contraction force through a flowable composite and a resin-modified glass ionomer cement. J Appl Oral Sci (2007) 0.81
Influence of additives on the properties of Bis-GMA/Bis-GMA analog comonomers and corresponding copolymers. Dent Mater (2006) 0.81
56-month clinical performance of Class I and II resin composite restorations. J Appl Oral Sci (2012) 0.81
In vitro wear, surface roughness and hardness of propanal-containing and diacetyl-containing novel composites and copolymers based on bis-GMA analogs. Dent Mater (2007) 0.81
Minimal alterations on the enamel surface by micro-abrasion: in vitro roughness and wear assessments. J Appl Oral Sci (2013) 0.81
Conservative approach for a clinical resolution of enamel white spot lesions. Quintessence Int (2011) 0.81
In vitro interactions between lactic acid solution and art glass-ionomer cements. J Appl Oral Sci (2009) 0.80
Assessing the tooth-restoration interface wear resistance of two cementation techniques: effect of a surface sealant. Oper Dent (2005) 0.80
Clinical evaluation of ceramic inlays and onlays made with two systems: a one-year follow-up. J Adhes Dent (2004) 0.79
The effect of different light-curing units on tensile strength and microhardness of a composite resin. J Appl Oral Sci (2007) 0.79
Polymerization of a dual-cured cement through ceramic: LED curing light vs halogen lamp. J Appl Oral Sci (2004) 0.78
Clinical strategies for esthetic excellence in anterior tooth restorations: understanding color and composite resin selection. J Appl Oral Sci (2012) 0.78
Influence of 2% chlorhexidine digluconate on bond strength of a glass-fibre post luted with resin or glass-ionomer based cement. J Dent (2014) 0.77
Evaluation of weight loss and surface roughness of compomers after simulated toothbrushing abrasion test. J Appl Oral Sci (2005) 0.77
Effect of toothbrushing abrasion on weight and surface roughness of pH-cycled resin cements and indirect restorative materials. Quintessence Int (2007) 0.77
Analysis of the color alteration and radiopacity promoted by bismuth oxide in calcium silicate cement. Braz Oral Res (2013) 0.77
Partial pulpotomy and tooth reconstruction of a crown-fractured permanent incisor: a case report. Quintessence Int (2003) 0.77
Role of additional retention on marginal adaptation and sealing of large resin composite Class II restorations. Oper Dent (2007) 0.77
Influence of curing rate on softening in ethanol, degree of conversion, and wear of resin composite. Am J Dent (2011) 0.76
Effect of light sources and curing mode techniques on sorption, solubility and biaxial flexural strength of a composite resin. J Appl Oral Sci (2012) 0.75
Direct Composite Restorations to Mask Intrinsic Staining: An Eighteen-Year Follow-Up. Dent Today (2016) 0.75
The effect of baking soda when applied to bleached enamel prior to restorative treatment. Gen Dent (2013) 0.75
Wear and surface roughness of silorane composites after pH cycling and toothbrushing abrasion. Am J Dent (2014) 0.75
Fracture strength of the remaining dental structure after different cavity preparation designs. Gen Dent (2016) 0.75
Diametral tensile strength and water sorption of glass-ionomer cements used in Atraumatic Restorative Treatment. J Appl Oral Sci (2003) 0.75
Multidisciplinary approach to the establishment and maintenance of an esthetic smile: a 9-year follow-up case report. Quintessence Int (2012) 0.75
Conservative approaches for the management of failed resin-based posterior restorations: a case report. Quintessence Int (2011) 0.75
Influence of volume and activation mode on polymerization shrinkage forces of resin cements. Braz Dent J (2013) 0.75
A 12-month clinical trial examining the effects of a surface sealant on Class I composite resin restorations. Gen Dent (2016) 0.75
Cementation considerations for CAD/CAM all-ceramic restorations. Pract Proced Aesthet Dent (2004) 0.75