Published in J Prosthet Dent on September 01, 2013
Assessment of color parameters of composite resin shade guides using digital imaging versus colorimeter. J Esthet Restor Dent (2010) 1.51
Treatment for ectopic third molar in the subcondylar region planned with cone beam computed tomography: a case report. J Oral Maxillofac Surg (2009) 1.20
Effects of surface conditioning on repair bond strengths of non-aged and aged microhybrid, nanohybrid, and nanofilled composite resins. Clin Oral Investig (2010) 1.08
Gender difference in prevalence of signs and symptoms of temporomandibular joint disorders: a retrospective study on 243 consecutive patients. Int J Med Sci (2012) 0.98
Loss of surface enamel after bracket debonding: an in-vivo and ex-vivo evaluation. Am J Orthod Dentofacial Orthop (2010) 0.97
Incidence of dry socket, alveolar infection, and postoperative pain following the extraction of erupted teeth. J Contemp Dent Pract (2010) 0.97
Evaluation of chlorhexidine gluconate mouthrinse-induced staining using a digital colorimeter: an in vivo study. Quintessence Int (2011) 0.92
Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system. J Prosthodont (2011) 0.90
Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis. J Adhes Dent (2015) 0.89
Implant-abutment gap versus microbial colonization: Clinical significance based on a literature review. J Biomed Mater Res B Appl Biomater (2013) 0.89
Fracture strength and failure mode of maxillary implant-supported provisional single crowns: a comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments. Clin Implant Dent Relat Res (2010) 0.87
Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens. Clin Oral Investig (2012) 0.86
Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists. Acta Odontol Scand (2012) 0.84
Repair of silorane composite--using the same substrate or a methacrylate-based composite? Dent Mater (2011) 0.83
Evaluation of human enamel surfaces treated with theobromine: a pilot study. Oral Health Prev Dent (2012) 0.81
Radiopacity measurements of direct and indirect resin composites at different thicknesses using digital image analysis. Dent Mater J (2015) 0.81
A clinical protocol for intraoral digital impression of screw-retained CAD/CAM framework on multiple implants based on wavefront sampling technology. Implant Dent (2013) 0.81
Effects of simulated gastric juice on color stability, surface roughness and microhardness of laboratory-processed composites. Dent Mater J (2014) 0.81
Glucose levels and hemodynamic changes in patients submitted to routine dental treatment with and without local anesthesia. Clinics (Sao Paulo) (2010) 0.81
Accuracy of a digital impression system based on parallel confocal laser technology for implants with consideration of operator experience and implant angulation and depth. Int J Oral Maxillofac Implants (2014) 0.80
Two-body wear rate of CAD/CAM resin blocks and their enamel antagonists. J Prosthet Dent (2013) 0.80
Clinical longevity of ceramic laminate veneers bonded to teeth with and without existing composite restorations up to 40 months. Clin Oral Investig (2012) 0.79
The influence of grain size on low-temperature degradation of dental zirconia. J Biomed Mater Res B Appl Biomater (2011) 0.79
A single dose of amoxicillin and dexamethasone for prevention of postoperative complications in third molar surgery: a randomized, double-blind, placebo controlled clinical trial. J Clin Med Res (2013) 0.79
Fracture resistance of crowns cemented on titanium and zirconia implant abutments: a comparison of monolithic versus manually veneered all-ceramic systems. Int J Oral Maxillofac Implants (2012) 0.79
Durability of adhesion between feldspathic ceramic and resin cements: effect of adhesive resin, polymerization mode of resin cement, and aging. J Prosthodont (2013) 0.79
Prosthodontic considerations in the implant-supported all-ceramic restoration of congenitally missing maxillary lateral incisor: a clinical report. J Prosthodont (2013) 0.78
Using stereophotogrammetric technology for obtaining intraoral digital impressions of implants. J Am Dent Assoc (2014) 0.77
Heat treatment of pre-hydrolyzed silane increases adhesion of phosphate monomer-based resin cement to glass ceramic. Braz Dent J (2015) 0.77
Accuracy of a digital impression system based on active wavefront sampling technology for implants considering operator experience, implant angulation, and depth. Clin Implant Dent Relat Res (2013) 0.77
Surface Conditioning Protocol for the Adhesion of Resin-based Materials to Glassy Matrix Ceramics: How to Condition and Why? J Adhes Dent (2015) 0.77
Effect of intermediate adhesive resin and flowable resin application on the interfacial adhesion of resin composite to pre-impregnated unidirectional S2-glass fiber bundles. J Adhes Dent (2014) 0.77
Publish or perish, publish and perish. J Adhes Dent (2014) 0.77
Comparison of alternative adhesive cementation concepts for zirconia ceramic: glaze layer vs zirconia primer. J Adhes Dent (2012) 0.77
Adhesion Protocol for Bonding Abutments or Fixed Dental Prostheses on Titanium Bases in Implant-borne Reconstructions: How and Why? J Adhes Dent (2016) 0.76
Editorial: response to letter to the editor. J Adhes Dent (2015) 0.75
Dislodgement Resistance of Zirconia Copings Cemented onto Zirconia and Titanium Abutments. Implant Dent (2017) 0.75
Retracted Influence of resin cements and aging on the fracture resistance of IPS e.max press posterior crowns. Int J Prosthodont (2012) 0.75
Effect of Different Abutments and Connections in Deformation Crestal Bone. Implant Dent (2016) 0.75
Intraoral repair protocol for chipping or fracture of veneering ceramic in zirconia fixed dental prostheses. J Adhes Dent (2015) 0.75
Surface Conditioning and Bonding Protocol for Nanocomposite Indirect Restorations: How and Why? J Adhes Dent (2016) 0.75
Cleaning, Disinfection, and Sterilization Protocols Employed for Customized Implant Abutments: An International Survey of 100 Universities Worldwide. Int J Oral Maxillofac Implants (2017) 0.75
How to repair ceramic chipping or fracture in metal-ceramic fixed dental prostheses intraorally: step-by-step procedures. J Adhes Dent (2014) 0.75
Radioactive potential of zirconium-dioxide used for dental applications. J Appl Biomater Funct Mater (2014) 0.75
Marginal Bone Loss Around Early-Loaded SLA and SLActive Implants: Radiological Follow-Up Evaluation Up to 6.5 Years. Implant Dent (2017) 0.75
Fracture Strength, Failure Types, and Weibull Characteristics of Three-Unit Zirconia Fixed Dental Prostheses After Cyclic Loading: Effects of Veneering and Air-Abrasion Protocols. Int J Periodontics Restorative Dent (2016) 0.75
Effect of different cleaning regimens on the adhesion of resin to saliva-contaminated ceramics. J Prosthodont (2014) 0.75
International Academy for Adhesive Dentistry (IAAD). J Adhes Dent (2016) 0.75
Bonding of glass ceramic and indirect composite to non-aged and aged resin composite. J Adhes Dent (2012) 0.75
Color assessment after bleaching with hydrogen peroxide versus ozone: a randomized controlled clinical trial. Gen Dent (2017) 0.75
Surface conditioning protocol for the chairside repair of polymeric denture teeth. J Adhes Dent (2015) 0.75
Effect of prophylactic polishing pastes on roughness and translucency of lithium disilicate ceramic. Int J Periodontics Restorative Dent (2014) 0.75
Protocol for Removal of Clinically Relevant Contaminants from Zirconium Dioxide Fixed Dental Prostheses. J Adhes Dent (2015) 0.75
Relation between handling characteristics and application time of four photo-polymerized resin composites. Chin J Dent Res (2013) 0.75
A strain gauge analysis of microstrain induced by various splinting methods and acrylic resin types for implant impressions. Int J Oral Maxillofac Implants (2012) 0.75
Effect of physical and physicochemical surface treatment methods on the tensile strength of CAD/CAM-fabricated zirconia posts and cores luted to root canals. Int J Periodontics Restorative Dent (2011) 0.75
Accuracy of two digital implant impression systems based on confocal microscopy with variations in customized software and clinical parameters. Int J Oral Maxillofac Implants (2015) 0.75
Repair Protocol for Amalgam Fillings with and Without Cusp Fracture: How and Why? J Adhes Dent (2016) 0.75
Accuracy of definitive casts using 4 implant-level impression techniques in a scenario of multi-implant system with different implant angulations and subgingival alignment levels. Implant Dent (2013) 0.75
Lost in translation? J Adhes Dent (2014) 0.75
Surface Conditioning Protocol for the Adhesion of Resin-based Cements to Base and Noble Alloys: How to Condition and Why? J Adhes Dent (2015) 0.75
Protocol for Removal of Clinically Relevant Contaminants from Glass Ceramic-based Restorations. J Adhes Dent (2015) 0.75
The erosion kinetics of conventional and resin-modified glass-ionomer luting cements in acidic buffer solutions. Dent Mater J (2012) 0.75
Effect of chemical etching solutions versus air abrasion on the adhesion of self-adhesive resin cement to IPS e.max ZirCAD with and without aging. Int J Esthet Dent (2017) 0.75
A Clinical Study Assessing the Influence of Anodized Titanium and Zirconium Dioxide Abutments and Peri-implant Soft Tissue Thickness on the Optical Outcome of Implant-Supported Lithium Disilicate Single Crowns. Int J Oral Maxillofac Implants (2017) 0.75
Heat Generation on Implant Surface During Abutment Preparation at Different Elapsed Time Intervals. Implant Dent (2017) 0.75
Effect of restorative, endodontic, and fatigue treatments on the cuspal deflection of maxillary premolars subjected to different cyclic occlusal forces: an in vitro study. Int J Periodontics Restorative Dent (2015) 0.75
Strain gauge analysis of the effect of porcelain firing simulation on the prosthetic misfit of implant-supported frameworks. Implant Dent (2012) 0.75
Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia? J Adhes Dent (2015) 0.75
Accuracy of a Digital Impression System Based on Active Triangulation Technology With Blue Light for Implants: Effect of Clinically Relevant Parameters. Implant Dent (2015) 0.75
High-Performance Polymers and Their Potential Application as Medical and Oral Implant Materials: A Review. Implant Dent (2015) 0.75
Evaluation of spatial and functional roughness parameters on air-abraded zirconia as a function of particle type and deposition pressure. J Adhes Dent (2015) 0.75
A 10-Year Clinical Evaluation of Resin-Bonded Fixed Dental Prostheses on Non-Prepared Teeth. Eur J Prosthodont Restor Dent (2016) 0.75
Surface Conditioning and Bonding Protocol for Polymer-infiltrated Ceramic: How and Why? J Adhes Dent (2016) 0.75