Published in Dent Mater on September 29, 2013
Role of filler and functional group conversion in the evolution of properties in polymeric dental restoratives. Dent Mater (2014) 0.95
Accessing photo-based morphological control in phase-separated, cross-linked networks through delayed gelation. Eur Polym J (2015) 0.84
Longer-Term Postcure Measurement of Cuspal Deformation Induced by Dimensional Changes in Dental Materials. Int J Dent (2015) 0.77
Reduced shrinkage stress via photo-initiated copper(I)-catalyzed cycloaddition polymerizations of azide-alkyne resins. Dent Mater (2016) 0.75
System compliance dictates the effect of composite filler content on polymerization shrinkage stress. Dent Mater (2016) 0.75
Simultaneous Measurement of Fluorescence, Conversion and Physical/mechanical Properties for Monitoring Bulk and Localized Photopolymerization Reactions in Heterogeneous Systems. RSC Adv (2016) 0.75
Delayed photo-activation and addition of thio-urethane: impact on polymerization kinetics and stress of dual-cured resin cements. J Dent (2017) 0.75
Determination of double bond conversion in dental resins by near infrared spectroscopy. Dent Mater (2001) 3.07
Recent advances and developments in composite dental restorative materials. J Dent Res (2010) 2.12
Developing a more complete understanding of stresses produced in dental composites during polymerization. Dent Mater (2005) 1.84
Probing the origins and control of shrinkage stress in dental resin composites. II. Novel method of simultaneous measurement of polymerization shrinkage stress and conversion. J Biomed Mater Res B Appl Biomater (2004) 1.62
The effect of cure rate on the mechanical properties of dental resins. Dent Mater (2001) 1.55
Impact of curing protocol on conversion and shrinkage stress. J Dent Res (2005) 1.54
Towards the elucidation of shrinkage stress development and relaxation in dental composites. Dent Mater (2004) 1.53
Conversion-dependent shrinkage stress and strain in dental resins and composites. Dent Mater (2005) 1.42
Delayed Gelation Through Chain-Transfer Reactions: Mechanism For Stress Reduction In Methacrylate Networks. Polymer (Guildf) (2011) 1.39
Use of near-IR to monitor the influence of external heating on dental composite photopolymerization. Dent Mater (2004) 1.32
Do dental composites always shrink toward the light? J Dent Res (1998) 1.29
Factors affecting photopolymerization stress in dental composites. J Dent Res (2008) 1.11
Dimethacrylate network formation and polymer property evolution as determined by the selection of monomers and curing conditions. Dent Mater (2012) 1.06
Contraction stress determinants in dimethacrylate composites. J Dent Res (2008) 0.96
Prediction and diagnosis of clinical outcomes affecting restoration margins. J Oral Rehabil (2011) 0.90
Kinetic study of free radicals trapped in dental resins stored in different environments. Acta Biomater (2009) 0.86
Polymerization stress development in dental composites: Effect of cavity design factor. Materials (Basel) (2009) 0.83
Probing the origins and control of shrinkage stress in dental resin composites. II. Novel method of simultaneous measurement of polymerization shrinkage stress and conversion. J Biomed Mater Res B Appl Biomater (2004) 1.62
Delayed Gelation Through Chain-Transfer Reactions: Mechanism For Stress Reduction In Methacrylate Networks. Polymer (Guildf) (2011) 1.39
Investigation of thiol-ene and thiol-ene-methacrylate based resins as dental restorative materials. Dent Mater (2010) 1.35
Hydrogen bonding interactions in methacrylate monomers and polymers. J Biomed Mater Res A (2007) 1.34
Use of near-IR to monitor the influence of external heating on dental composite photopolymerization. Dent Mater (2004) 1.32
Control of polymerization shrinkage and stress in nanogel-modified monomer and composite materials. Dent Mater (2011) 1.31
Evaluation and Control of Thiol-ene/Thiol-epoxy Hybrid Networks. Polymer (Guildf) (2007) 1.26
Relationships between conversion, temperature and optical properties during composite photopolymerization. Acta Biomater (2009) 1.21
Properties of methacrylate-thiol-ene formulations as dental restorative materials. Dent Mater (2010) 1.19
Copolymerization and Dark Polymerization Studies for Photopolymerization of Novel Acrylic Monomers. Polymer (Guildf) (2007) 1.10
A Study of Shrinkage Stress Reduction and Mechanical Properties of Nanogel-Modified Resin Systems. Eur Polym J (2012) 1.09
Development of highly reactive mono-(meth)acrylates as reactive diluents for dimethacrylate-based dental resin systems. Biomaterials (2005) 1.06
Influence of matrix composition on polymerization stress development of experimental composites. Dent Mater (2010) 1.01
Dental resins based on dimer acid dimethacrylates: a route to high conversion with low polymerization shrinkage. Compend Contin Educ Dent (2010) 1.00
A new approach to network heterogeneity: Polymerization Induced Phase Separation in photo-initiated, free-radical methacrylic systems. Polymer (Guildf) (2012) 1.00
Influence of BisGMA, TEGDMA, and BisEMA contents on viscosity, conversion, and flexural strength of experimental resins and composites. Eur J Oral Sci (2009) 0.99
Characterization of dimethacrylate polymeric networks: a study of the crosslinked structure formed by monomers used in dental composites. Eur Polym J (2011) 0.98
Thiol-ene-methacrylate composites as dental restorative materials. Dent Mater (2010) 0.97
A Mechanistic and Kinetic Study of the Photoinitiated Cationic Double Ring-opening Polymerization of 2-Methylene-7-phenyl-1,4,6,9-tetraoxa-spiro[4.4]nonane. Macromolecules (2006) 0.96
Influence of radiant exposure on contraction stress, degree of conversion and mechanical properties of resin composites. Dent Mater (2006) 0.93
Polymerization development of "low-shrink" resin composites: Reaction kinetics, polymerization stress and quality of network. Dent Mater (2013) 0.86
Light-activated, in situ forming gel for sustained suprachoroidal delivery of bevacizumab. Mol Pharm (2013) 0.86
Effect of ethyl-alpha-hydroxymethylacrylate on selected properties of copolymers and ACP resin composites. J Mater Sci Mater Med (2008) 0.85
Design, Development and Evaluation of Monovinyl Acrylates Characterized by Secondary Functionalities as Reactive Diluents to Diacrylates. Macromolecules (2007) 0.85
Evaluation of highly reactive mono-methacrylates as reactive diluents for BisGMA-based dental composites. Dent Mater (2008) 0.82
Visible-light organic photocatalysis for latent radical-initiated polymerization via 2e⁻/1H⁺ transfers: initiation with parallels to photosynthesis. J Am Chem Soc (2014) 0.80
Analysis of association constant for ground state dye-electron acceptor complex of photoinitiator systems and the association constant effect on the kinetics of visible-light-induced polymerizations. J Polym Sci A Polym Chem (2009) 0.78
Photopolymerizable nanogels as macromolecular precursors to covalently crosslinked water-based networks. Soft Matter (2015) 0.78
Effect of antioxidants on the dentin interface bond stability of adhesives exposed to hydrolytic degradation. J Adhes Dent (2015) 0.77
Reactivity of Monovinyl (Meth)Acrylates Containing Cyclic Carbonates. Macromolecules (2008) 0.77
Rapid Solid-State Photopolymerization of Cyclic Acetal-Containing Acrylates. Macromolecules (2009) 0.76
Using hyperbranched oligomer functionalized glass fillers to reduce shrinkage stress. Dent Mater (2012) 0.75
A Smart Antibacterial Surface Made by Photopolymerization. ACS Appl Mater Interfaces (2016) 0.75
Surface treatment with N,N'-dimethacryloylcystine for enhanced bonding of resin to dental alloys. Dent Mater J (2007) 0.75
Alkyl chain length effects on copolymerization kinetics of a monoacrylate with hexanediol diacrylate. J Comb Chem (2007) 0.75
Development of quantitative structure-activity relationships for explanatory modeling of fast reacting (meth)acrylate monomers bearing novel functionality. J Mol Graph Model (2011) 0.75