Published in J Adhes Dent on April 01, 2014
Comparison of fiber reinforcement placed at different locations of pontic in interim fixed partial denture to prevent fracture: An in vitro study. J Indian Prosthodont Soc (2016) 0.79
Long-term behavior of double crown retained dentures with metal and metal-free secondary crowns and frameworks made of Vectris(©) on all-ceramic primary crowns: a prospective, randomized clinical trial up to 14 years. Clin Oral Investig (2015) 0.78
Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater (2003) 1.82
Oral health-related knowledge, attitudes, behavior, and family characteristics among Finnish schoolchildren with and without active initial caries lesions. Acta Odontol Scand (2007) 1.48
Flexural properties of fiber reinforced root canal posts. Dent Mater (2004) 1.31
An introduction to silanes and their clinical applications in dentistry. Int J Prosthodont (2004) 1.27
Effect of fiber position and orientation on fracture load of fiber-reinforced composite. Dent Mater (2004) 1.27
Dentin moisture conditions affect the adhesion of root canal sealers. J Endod (2011) 1.17
A study of the physical and chemical properties of four resin composite luting cements. Int J Prosthodont (2004) 1.12
Bonding of fibre-reinforced composite post to root canal dentin. J Dent (2005) 1.12
A fiber-reinforced composite prosthesis restoring a lateral midfacial defect: a clinical report. J Prosthet Dent (2008) 1.11
Short glass fiber reinforced restorative composite resin with semi-inter penetrating polymer network matrix. Dent Mater (2007) 1.09
Polymerization shrinkage of experimental short glass fiber-reinforced composite with semi-inter penetrating polymer network matrix. Dent Mater (2007) 1.08
Innovations in bonding to zirconia-based materials: Part I. Dent Mater (2008) 1.08
Load bearing capacity of fibre-reinforced and particulate filler composite resin combination. J Dent (2005) 1.07
A structured analysis of in vitro failure loads and failure modes of fiber, metal, and ceramic post-and-core systems. Int J Prosthodont (2004) 1.07
Physical properties and depth of cure of a new short fiber reinforced composite. Dent Mater (2013) 1.06
Flexural properties of crosslinked and oligomer-modified glass-fibre reinforced acrylic bone cement. J Mater Sci Mater Med (2004) 1.06
The effect of length and concentration of glass fibers on the mechanical properties of an injection- and a compression-molded denture base polymer. J Prosthet Dent (2003) 1.06
Static and fatigue compression test for particulate filler composite resin with fiber-reinforced composite substructure. Dent Mater (2006) 1.04
Quality of life in patients with severe malocclusion before treatment. Eur J Orthod (2009) 1.03
Effect of cross-sectional design on the modulus of elasticity and toughness of fiber-reinforced composite materials. J Prosthet Dent (2005) 1.00
Fracture resistance of short, randomly oriented, glass fiber-reinforced composite premolar crowns. Acta Biomater (2007) 1.00
Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Oper Dent (2006) 1.00
Use of short fiber-reinforced composite with semi-interpenetrating polymer network matrix in fixed partial dentures. J Dent (2006) 0.99
Evaluation of resin adhesion to zirconia ceramic using some organosilanes. Dent Mater (2006) 0.99
Innovations in bonding to zirconia-based materials. Part II: Focusing on chemical interactions. Dent Mater (2009) 0.99
Adsorption of parotid saliva proteins and adhesion of Streptococcus mutans ATCC 21752 to dental fiber-reinforced composites. J Biomed Mater Res B Appl Biomater (2003) 0.98
Regional push-out bond strength and coronal microleakage of Resilon after different light-curing methods. J Endod (2007) 0.98
Association between dental fear and dental attendance among adults in Finland. Acta Odontol Scand (2007) 0.98
Three-dimensional finite element analysis of metal and FRC adhesive fixed dental prostheses. J Adhes Dent (2008) 0.98
Effect of shading the zirconia framework on biaxial strength and surface microhardness. Acta Odontol Scand (2008) 0.97
Evaluation of polymerization shrinkage and hydroscopic expansion of fiber-reinforced biocomposites using optical fiber Bragg grating sensors. Dent Mater (2008) 0.97
Compressive strength and surface characterization of glass ionomer cements modified by particles of bioactive glass. Dent Mater (2005) 0.95
Oral-health-related quality of life among children with and without dental fear. Int J Paediatr Dent (2009) 0.95
Chairside fabricated fiber-reinforced composite fixed partial denture. Libyan J Med (2007) 0.94
In vitro fracture resistance of fiber reinforced cusp-replacing composite restorations. Dent Mater (2005) 0.94
Reconstruction of critical size calvarial bone defects in rabbits with glass-fiber-reinforced composite with bioactive glass granule coating. J Biomed Mater Res B Appl Biomater (2008) 0.93
Bonding polycarbonate brackets to ceramic: effects of substrate treatment on bond strength. Am J Orthod Dentofacial Orthop (2004) 0.93
Comparison of repair methods for ceramic-fused-to-metal crowns. J Prosthodont (2006) 0.93
Continuous and short fiber reinforced composite in root post-core system of severely damaged incisors. Open Dent J (2009) 0.93
Translucency of flowable bulk-filling composites of various thicknesses. Chin J Dent Res (2012) 0.93
Effect of cementation technique of individually formed fiber-reinforced composite post on bond strength and microleakage. Open Dent J (2013) 0.93
Five-year survival of 3-unit fiber-reinforced composite fixed partial dentures in the anterior area. Dent Mater (2009) 0.92
Gender differences in child-related and parent-related determinants of oral health-related lifestyle among 11- to 12-year-old Finnish schoolchildren. Acta Odontol Scand (2007) 0.92
Fracture toughness, compressive strength and load-bearing capacity of short glass fibre-reinforced composite resin. Chin J Dent Res (2011) 0.90
The effect of high fiber fraction on some mechanical properties of unidirectional glass fiber-reinforced composite. Dent Mater (2010) 0.90
In vitro fracture behavior of maxillary premolars with metal crowns and several post-and-core systems. Eur J Oral Sci (2006) 0.90
Dendritic copolymers and particulate filler composites for dental applications: degree of conversion and thermal properties. Dent Mater (2007) 0.90
Damage mechanics and load failure of fiber-reinforced composite fixed partial dentures. Dent Mater (2005) 0.90
Effect of different intraorifice barriers on the fracture resistance of roots obturated with Resilon or gutta-percha. J Endod (2010) 0.90
Dental fear and oral health habits among adults in Finland. Acta Odontol Scand (2008) 0.90
The effect of fiber orientation on the thermal expansion coefficients of fiber-reinforced composites. Dent Mater (2003) 0.90
The static strength and modulus of fiber reinforced denture base polymer. Dent Mater (2005) 0.89
Can parents and children evaluate each other's dental fear? Eur J Oral Sci (2010) 0.89
Degree of conversion of dual-cure luting resins light-polymerized through various materials. Acta Odontol Scand (2007) 0.89
Direct restoration of severely damaged incisors using short fiber-reinforced composite resin. J Dent (2007) 0.89
Silane based concepts on bonding resin composite to metals. J Contemp Dent Pract (2007) 0.89
Acoustic emission analysis of fiber-reinforced composite in flexural testing. Dent Mater (2004) 0.88
Depth of cure and surface microhardness of experimental short fiber-reinforced composite. Acta Odontol Scand (2008) 0.88
Release of silica, calcium, phosphorus, and fluoride from glass ionomer cement containing bioactive glass. J Biomater Appl (2004) 0.88
Strength of adhesive-bonded fiber-reinforced composites to enamel and dentin substrates. J Adhes Dent (2003) 0.88
Optical characterization of bisphenol-A-glycidyldimethacrylate-triethyleneglycoldimethacrylate (BisGMA/TEGDMA) monomers and copolymer. Dent Mater (2008) 0.87
Evaluation of some properties of two fiber-reinforced composite materials. Acta Odontol Scand (2005) 0.87
Effect of chlorhexidine on initial adhesion of fiber-reinforced post to root canal. J Dent (2010) 0.87
Force levels of fiber-reinforced composites and orthodontic stainless steel wires: a 3-point bending test. Am J Orthod Dentofacial Orthop (2008) 0.87
Effects of short-term xylitol gum chewing on the oral microbiome. Clin Oral Investig (2014) 0.86
Incorporation of an antibacterial and radiopaque monomer in to dental resin system. Dent Mater (2012) 0.86
Degree of conversion and flexural properties of a dendrimer/methyl methacrylate copolymer: design of experiments and statistical screening. Dent Mater (2005) 0.86
Ceramic-dentin bonding: effect of adhesive systems and light-curing units. J Adhes Dent (2007) 0.86
Parental influence on children's oral health-related behavior. Acta Odontol Scand (2006) 0.86
Water sorption, solubility and dimensional changes of denture base polymers reinforced with short glass fibers. J Biomater Appl (2003) 0.85
Repair of bone segment defects with surface porous fiber-reinforced polymethyl methacrylate (PMMA) composite prosthesis: histomorphometric incorporation model and characterization by SEM. Acta Orthop (2008) 0.85
Load-bearing capacity of human incisor restored with various fiber-reinforced composite posts. Dent Mater (2011) 0.85
Effect of rigid rod polymer filler on mechanical properties of poly-methyl methacrylate denture base material. Dent Mater (2007) 0.85
Pilot evaluation of resin composite cement adhesion to zirconia using a novel silane system. Acta Odontol Scand (2007) 0.85
The bond strength of particulate-filler composite to differently oriented fiber-reinforced composite substrate. J Prosthodont (2007) 0.85
Fracture behavior of structurally compromised non-vital maxillary premolars restored using experimental fiber reinforced composite crowns. Am J Dent (2006) 0.85
Influence of polymerization mode on degree of conversion and micropush-out bond strength of resin core systems using different adhesive systems. Dent Mater J (2008) 0.85
Synthesis of methacrylate monomers with antibacterial effects against S. mutans. Molecules (2011) 0.85
Influence of cement thickness on the bond strength of tooth-colored posts to root dentin after thermal cycling. Acta Odontol Scand (2012) 0.85
Effect of nanofiller fractions and temperature on polymerization shrinkage on glass fiber reinforced filling material. Dent Mater (2007) 0.85
Depth of light-initiated polymerization of glass fiber-reinforced composite in a simulated root canal. Int J Prosthodont (2003) 0.84
Fiber-reinforced composite substructure: load-bearing capacity of an onlay restoration. Acta Odontol Scand (2006) 0.84
Analysis of residual monomers in dendritic methacrylate copolymers and composites by HPLC and headspace-GC/MS. Dent Mater (2005) 0.84
Preparation and evaluation of dental resin with antibacterial and radio-opaque functions. Int J Mol Sci (2013) 0.84
Repair bond strength of restorative resin composite applied to fiber-reinforced composite substrate. Acta Odontol Scand (2004) 0.84
The effect of fiber position and polymerization condition on the flexural properties of fiber-reinforced composite. J Contemp Dent Pract (2004) 0.84
Dental esthetics and quality of life in adults with severe malocclusion before and after treatment. Angle Orthod (2013) 0.84
Fiber-reinforced onlay composite resin restoration: a case report. J Contemp Dent Pract (2009) 0.84
Multi-layer porous fiber-reinforced composites for implants: in vitro calcium phosphate formation in the presence of bioactive glass. Dent Mater (2012) 0.84
Effect of surface preparation on the bond strength of heat-polymerized denture base resin to commercially pure titanium and cobalt-chromium alloy. Dent Mater J (2011) 0.83
Framework design of an anterior fiber-reinforced hybrid composite fixed partial denture: a 3D finite element study. Int J Prosthodont (2009) 0.83
Effect of short-term water storage on the elastic properties of some dental restorative materials--A resonant ultrasound spectroscopy study. Dent Mater (2006) 0.83
The effect of box preparation on the strength of glass fiber-reinforced composite inlay-retained fixed partial dentures. J Prosthet Dent (2005) 0.83
The span length and cross-sectional design affect values of strength. Dent Mater (2005) 0.83
Flexural strengths of fiber-reinforced composites polymerized with conventional light-curing and additional postcuring. Am J Orthod Dentofacial Orthop (2007) 0.83
Effect of operating air pressure on tribochemical silica-coating. Acta Odontol Scand (2007) 0.83