Published in Dent Mater on February 14, 2015
A fractographic study of clinically retrieved zirconia-ceramic and metal-ceramic fixed dental prostheses. Dent Mater (2015) 0.82
Effects of two grading techniques of zirconia material on the fatigue limit of full-contour 3-unit fixed dental prostheses. Dent Mater (2017) 0.78
On the interfacial fracture resistance of resin-bonded zirconia and glass-infiltrated graded zirconia. Dent Mater (2015) 0.77
Acid etching of glass-infiltrated zirconia and its biological response. J Adv Prosthodont (2017) 0.75
State of the art of zirconia for dental applications. Dent Mater (2007) 2.56
Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent (1999) 2.35
Graded structures for damage resistant and aesthetic all-ceramic restorations. Dent Mater (2009) 1.96
The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater (1999) 1.85
The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent (2006) 1.78
Prospective clinical study of zirconia posterior fixed partial dentures: 3-year follow-up. Quintessence Int (2006) 1.76
Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B Appl Biomater (2004) 1.55
Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent (2003) 1.38
Damage accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont (2007) 1.37
Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater (2008) 1.26
Long-term strength of ceramics for biomedical applications. J Biomed Mater Res B Appl Biomater (2004) 1.25
Materials design in the performance of all-ceramic crowns. Biomaterials (2004) 1.25
Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent (2004) 1.24
Influence of surface treatments on the bond strength of repaired resin composite restorative materials. Dent Mater (2008) 1.23
Graded structures for all-ceramic restorations. J Dent Res (2010) 1.20
Optimization of ceramic strength using elastic gradients. Acta Mater (2009) 1.17
Edge chipping and flexural resistance of monolithic ceramics. Dent Mater (2013) 1.16
Competition of fracture mechanisms in monolithic dental ceramics: flat model systems. J Biomed Mater Res B Appl Biomater (2009) 1.12
Residual stresses in porcelain-veneered zirconia prostheses. Dent Mater (2012) 1.09
Fatigue of dental ceramics. J Dent (2013) 1.07
Designing functionally graded materials with superior load-bearing properties. Acta Biomater (2011) 0.99
Sliding contact fatigue of graded zirconia with external esthetic glass. J Dent Res (2011) 0.98
Surface modification for enhanced silanation of zirconia ceramics. Dent Mater (2009) 0.95
Damage and reliability of Y-TZP after cementation surface treatment. J Dent Res (2010) 0.92
Making yttria-stabilized tetragonal zirconia translucent. Dent Mater (2014) 0.91
Improving fatigue damage resistance of alumina through surface grading. J Dent Res (2011) 0.89
The wear of polished and glazed zirconia against enamel. J Prosthet Dent (2013) 0.89
The effect of nano-structured alumina coating on resin-bond strength to zirconia ceramics. Dent Mater (2010) 0.89
Effect of cooling rate on shear bond strength of veneering porcelain to a zirconia ceramic material. J Oral Sci (2010) 0.85
Fatigue behavior in water of Y-TZP zirconia ceramics after abrasion with 30 μm silica-coated alumina particles. Dent Mater (2010) 0.85
Off-axis sliding contact reliability and failure modes of veneered alumina and zirconia. Dent Mater (2009) 0.82
Silica-based nano-coating on zirconia surfaces using reactive magnetron sputtering: effect on chemical adhesion of resin cements. J Adhes Dent (2013) 0.81
Influence of veneer application on fracture behavior of lithium-disilicate-based ceramic crowns. Dent Mater (2012) 0.80
Load-bearing increase in alumina evoked by introduction of a functional glass gradient. J Eur Ceram Soc (2011) 0.80
Adhesion of veneering resins to polymethylmethacrylate-based CAD/CAM polymers after various surface conditioning methods. Acta Odontol Scand (2013) 0.79
Bond strength, microhardness, and core/veneer interface quality of an all-ceramic system. J Prosthodont (2009) 0.79
Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading. J Mech Behav Biomed Mater (2013) 0.78
Evaluation of resin bond strength to yttria-stabilized tetragonal zirconia and framework marginal fit: comparison of different surface conditionings. Oper Dent (2013) 0.77
Analysis of thermal distributions in veneered zirconia and metal restorations during firing. Dent Mater (2013) 0.77
Edge chipping and flexural resistance of monolithic ceramics. Dent Mater (2013) 1.16
Fatigue of dental ceramics. J Dent (2013) 1.07
A fractographic study of clinically retrieved zirconia-ceramic and metal-ceramic fixed dental prostheses. Dent Mater (2015) 0.82
Fracture-resistant monolithic dental crowns. Dent Mater (2016) 0.78
Effects of two grading techniques of zirconia material on the fatigue limit of full-contour 3-unit fixed dental prostheses. Dent Mater (2017) 0.78