Shear Bond Strength of MDP-Containing Self-Adhesive Resin Cement and Y-TZP Ceramics: Effect of Phosphate Monomer-Containing Primers.

PubWeight™: 0.81‹?›

🔗 View Article (PMC 4619787)

Published in Biomed Res Int on October 11, 2015

Authors

Jin-Soo Ahn1, Young-Ah Yi2, Yoon Lee3, Deog-Gyu Seo4

Author Affiliations

1: Department of Dental Biomaterials Science, Dental Research Institute, School of Dentistry, Seoul National University, 101 Daehak-ro, Jongno-gu, Seoul, Republic of Korea.
2: Department of Dentistry, Inje University, Seoul Paik Hospital, Marunae-ro 9, Jung-gu, Seoul, Republic of Korea.
3: Department of Dentistry, Wonju College of Medicine, Yonsei University, 162 Ilsan-dong, Wonju, Republic of Korea.
4: Department of Conservative Dentistry and Dental Research Institute, School of Dentistry, Seoul National University, Seoul, Republic of Korea.

Articles cited by this

Zirconia as a ceramic biomaterial. Biomaterials (1999) 5.52

Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater (1998) 1.81

Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater (2006) 1.45

Bonding of primed zirconia ceramics: evidence of chemical bonding and improved bond strengths. Am J Dent (2012) 1.22

Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic. Dent Mater (2008) 1.13

The effect of sandblasting and different primers on shear bond strength between yttria-tetragonal zirconia polycrystal ceramic and a self-adhesive resin cement. Oper Dent (2014) 1.13

Bond strength of resin cements to a zirconia ceramic with different surface treatments. Oper Dent (2009) 1.09

Evaluation of the shear bond strength of resin cement to Y-TZP ceramic after different surface treatments. Scanning (2014) 1.08

New zirconia primer improves bond strength of resin-based cements. Dent Mater (2010) 1.08

In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion. Clin Oral Investig (2009) 1.02

Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning. J Adhes Dent (2006) 0.95

Bond strength of resin cement to CO2 and Er:YAG laser-treated zirconia ceramic. Restor Dent Endod (2014) 0.89

Durability of resin bonding to zirconia ceramic using different primers. J Adhes Dent (2009) 0.89

Bonding of resin-based luting cements to zirconia with and without the use of ceramic priming agents. J Adhes Dent (2012) 0.89

Effect of sandblasting and various metal primers on the shear bond strength of resin cement to Y-TZP ceramic. Dent Mater (2010) 0.87

Effect of curing mode on bond strength of self-adhesive resin luting cements to dentin. J Biomed Mater Res B Appl Biomater (2010) 0.86

Evaluation of self-adhesive resin cement bond strength to yttria-stabilized zirconia ceramic (Y-TZP) using four surface treatments. J Adhes Dent (2011) 0.85

Bond strength of selected composite resin-cements to zirconium-oxide ceramic. Med Oral Patol Oral Cir Bucal (2013) 0.83

Influence of priming agents on the short-term bond strength of an indirect composite veneering material to zirconium dioxide ceramic. Quintessence Int (2009) 0.82

Evaluation of a commercial primer for bonding of zirconia to two different resin composite cements. J Adhes Dent (2014) 0.81

Adhesive quality of self-adhesive and conventional adhesive resin cement to Y-TZP ceramic before and after aging conditions. Oper Dent (2010) 0.80

Effect of water storage on bond strength of self-adhesive resin cements to zirconium oxide ceramic. J Adhes Dent (2013) 0.79

Zirconia surface treatment for successful bonding. Restor Dent Endod (2014) 0.78

Adhesive bonding of zirconia with single-liquid acidic primers and a tri-n-butylborane initiated acrylic resin. J Adhes Dent (2010) 0.77