Published in J Periodontal Implant Sci on June 28, 2016
Observations on the effect of movement on bone ingrowth into porous-surfaced implants. Clin Orthop Relat Res (1986) 2.08
Prediction of femoral fracture load using automated finite element modeling. J Biomech (1998) 1.99
Cyclic mechanical property degradation during fatigue loading of cortical bone. J Biomech (1996) 1.53
Biomaterials and biomechanics of oral and maxillofacial implants: current status and future developments. Int J Oral Maxillofac Implants (2000) 1.21
Skeletal structural adaptations to mechanical usage (SATMU): 2. Redefining Wolff's law: the remodeling problem. Anat Rec (1990) 1.20
The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study. Clin Oral Implants Res (2001) 1.16
Implant stability and histomorphometry: a correlation study in human cadavers using stepped cylinder implants. Clin Oral Implants Res (2003) 1.13
Correlating implant stability to bone structure. Clin Oral Implants Res (2009) 1.09
Rationale for the application of immediate load in implant dentistry: Part I. Implant Dent (2004) 1.08
Stimulating effect of implant loading on surrounding bone. Comparison of three numerical models and validation by in vivo data. Clin Oral Implants Res (2004) 1.08
Risk factors associated with early failure of dental implants. A literature review. Med Oral Patol Oral Cir Bucal (2011) 1.02
Miniscrew stability evaluated with computerized tomography scanning. Am J Orthod Dentofacial Orthop (2010) 0.98
Influence of bone and dental implant parameters on stress distribution in the mandible: a finite element study. Int J Oral Maxillofac Implants (2009) 0.97
Implant micromotion is related to peak insertion torque and bone density. Clin Oral Implants Res (2009) 0.94
Occlusal force and oral tactile sensibility measured in partially edentulous patients with ITI implants. Int J Oral Maxillofac Implants (1995) 0.94
The effect of micro-motion on the tissue response around immediately loaded roughened titanium implants in the rabbit. Eur J Oral Sci (2007) 0.94
Distribution of micromotion in implants and alveolar bone with different thread profiles in immediate loading: a finite element study. Int J Oral Maxillofac Implants (2012) 0.93
Effect of diameter and length on stress distribution of the alveolar crest around immediate loading implants. Clin Implant Dent Relat Res (2008) 0.91
Evaluation of the correlation between insertion torque and primary stability of dental implants using a block bone test. J Periodontal Implant Sci (2013) 0.90
Immediate restoration and loading of dental implants: clinical considerations and protocols. Int J Oral Maxillofac Implants (2004) 0.90
Influence of surgical technique and surface roughness on the primary stability of an implant in artificial bone with different cortical thickness: a laboratory study. Clin Oral Implants Res (2010) 0.90
Early and immediate restoration and loading of implants in completely edentulous patients. Int J Oral Maxillofac Implants (2004) 0.89
Factors affecting stresses in cortical bone around miniscrew implants: a three-dimensional finite element study. Angle Orthod (2012) 0.88
The effects of cortical bone thickness and trabecular bone strength on noninvasive measures of the implant primary stability using synthetic bone models. Clin Implant Dent Relat Res (2011) 0.88
Assessment of correlation between computerized tomography values of the bone and cutting torque values at implant placement: a clinical study. Int J Oral Maxillofac Implants (2005) 0.86
Quantifying the influence of bone density and thickness on resonance frequency analysis: an in vitro study of biomechanical test materials. Int J Oral Maxillofac Implants (2010) 0.81
Is trabecular bone related to primary stability of miniscrews? Angle Orthod (2013) 0.81
Probabilistic analysis of peri-implant strain predictions as influenced by uncertainties in bone properties and occlusal forces. Clin Oral Implants Res (2007) 0.80
Effects of implant surface roughness and stiffness of grafted bone on an immediately loaded maxillary implant: a 3D numerical analysis. J Oral Rehabil (2008) 0.79
Finite element analysis of bone-implant biomechanics: refinement through featuring various osseointegration conditions. Int J Oral Maxillofac Surg (2012) 0.79
Survival of immediately provisionalized dental implants: a case-control study with up to 5 years follow-up. Clin Implant Dent Relat Res (2009) 0.79
Influence of implant collar design on stress and strain distribution in the crestal compact bone: a three-dimensional finite element analysis. Int J Oral Maxillofac Implants (2010) 0.78
Morphologic classification and stress analysis of the mandibular bone in the premolar region for implant placement. Int J Oral Maxillofac Implants (2010) 0.78
Non-linear 3D finite element analysis of full-arch implant-supported fixed dentures. Mater Sci Eng C Mater Biol Appl (2014) 0.77
Biomechanical factors associated with mandibular cantilevers: analysis with three-dimensional finite element models. Int J Oral Maxillofac Implants (2014) 0.77
Biomechanical effects of different fixed partial denture designs planned on bicortically anchored short, graft-supported long, or 45-degree-inclined long implants in the posterior maxilla: a three-dimensional finite element analysis. Int J Oral Maxillofac Implants (2014) 0.76
Influence of implant design on the biomechanical environment of immediately placed implants: computed tomography-based nonlinear three-dimensional finite element analysis. Int J Oral Maxillofac Implants (2011) 0.76
Influence of bone parameters on peri-implant bone strain distribution in the posterior mandible. Med Oral Patol Oral Cir Bucal (2015) 0.76
A Foreign Body Granuloma of the Buccal Mucosa Induced by Honeybee Sting. Case Rep Dent (2017) 0.75