Published in J Dent (Tehran) on December 01, 2015
Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent (1999) 2.35
Minimal intervention dentistry--a review. FDI Commission Project 1-97. Int Dent J (2000) 1.85
Considerations in measurement of marginal fit. J Prosthet Dent (1989) 1.66
Marginal and internal fits of fixed dental prostheses zirconia retainers. Dent Mater (2008) 1.37
From porcelain-fused-to-metal to zirconia: clinical and experimental considerations. Dent Mater (2010) 1.30
Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations. J Oral Rehabil (2005) 1.29
Materials design in the performance of all-ceramic crowns. Biomaterials (2004) 1.25
Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth. J Oral Rehabil (1999) 1.14
Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system. J Prosthet Dent (2010) 1.09
Tooth structure removal associated with various preparation designs for anterior teeth. J Prosthet Dent (2002) 1.09
Metal ceramic crowns--a review of tooth preparation. Eur J Prosthodont Restor Dent (2000) 0.97
A comparison of fracture strength of yttrium-oxide- partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil (2004) 0.96
Marginal adaptation of ceramic crowns: a systematic review. J Prosthet Dent (2013) 0.95
Influence of the veneering process on the marginal fit of zirconia fixed dental prostheses. J Oral Rehabil (2010) 0.94
Marginal and internal adaptation of zirconium dioxide ceramic copings and crowns with different finish line designs. Dent Mater J (2007) 0.92
Accuracy of ceramic restorations made with two CAD/CAM systems. J Prosthet Dent (2013) 0.90
Fatigue and fracture resistance of zirconia crowns prepared with different finish line designs. J Prosthodont (2011) 0.90
Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures. Aust Dent J (2010) 0.89
Influence of porcelain veneering on the marginal fit of Digident and Lava CAD/CAM zirconia ceramic crowns. J Adv Prosthodont (2010) 0.86
The influence of veneering porcelain thickness of all-ceramic and metal ceramic crowns on failure resistance after cyclic loading. J Prosthet Dent (2009) 0.85
Marginal fit consistency of copy-milled all-ceramic crowns during fabrication by light and scanning electron microscopic analysis in vitro. J Oral Rehabil (1997) 0.85
Comparison of the marginal adaptation of zirconium dioxide crowns in preparations with two different finish lines. J Prosthodont (2012) 0.85
The effect of finish line preparation and layer thickness on the failure load and fractography of ZrO2 copings. J Prosthet Dent (2008) 0.83
Influence of cervical finish line type on the marginal adaptation of zirconia ceramic crowns. Oper Dent (2009) 0.82
Influence of margin design and taper abutment angle on a restored crown of a first premolar using finite element analysis. Int J Prosthodont (2003) 0.82
Comparison of marginal fit of Lava CAD/CAM crown-copings with two finish lines. Int J Esthet Dent (2014) 0.82
A retrospective analysis of 102 zirconia single crowns with knife-edge margins. J Prosthet Dent (2012) 0.80
Marginal adaptation of zirconium dioxide copings: influence of the CAD/CAM system and the finish line design. J Prosthet Dent (2014) 0.79
Prevalence of Cardiovascular Disorders in Iranian Patients Suffering from Obstructive Sleep Apnea. J Dent (Tehran) (2016) 0.75