Published in Int J Dent on August 18, 2016
Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: a systematic review. J Prosthet Dent (2014) 2.12
Comparison of survival and complication rates of tooth-supported fixed dental prostheses (FDPs) and implant-supported FDPs and single crowns (SCs). Clin Oral Implants Res (2007) 1.93
Ten-year outcome of three-unit fixed dental prostheses made from monolithic lithium disilicate ceramic. J Am Dent Assoc (2012) 1.60
In vitro cytotoxicity of traditional versus contemporary dental ceramics. J Prosthet Dent (2003) 1.48
Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. Int J Prosthodont (2010) 1.14
Stress fatigue: basic principles and prosthodontic implications. Int J Prosthodont (1995) 1.10
Translucency and biaxial flexural strength of four ceramic core materials. Dent Mater (2008) 1.08
Survival rates of IPS empress 2 all-ceramic crowns and fixed partial dentures: results of a 5-year prospective clinical study. Quintessence Int (2006) 1.07
Two-year clinical evaluation of lithia-disilicate-based all-ceramic crowns and fixed partial dentures. Dent Mater (2005) 1.07
Influence of stress simulation parameters on the fracture strength of all-ceramic fixed-partial dentures. Dent Mater (2005) 1.06
Chair-side generated posterior lithium disilicate crowns after 4 years. Clin Oral Investig (2012) 1.05
Ceramic dental biomaterials and CAD/CAM technology: state of the art. J Prosthodont Res (2014) 1.04
Optical behavior of current ceramic systems. Int J Periodontics Restorative Dent (2006) 1.03
A comparison of the marginal fit of crowns fabricated with digital and conventional methods. J Prosthet Dent (2014) 1.03
Clinical results of lithium-disilicate crowns after up to 9 years of service. Clin Oral Investig (2012) 0.98
Clinical evaluation of 860 anterior and posterior lithium disilicate restorations: retrospective study with a mean follow-up of 3 years and a maximum observational period of 6 years. Int J Periodontics Restorative Dent (2014) 0.98
Internal fit of pressed and computer-aided design/computer-aided manufacturing ceramic crowns made from digital and conventional impressions. J Prosthet Dent (2014) 0.97
Impact of digital impression techniques on the adaption of ceramic partial crowns in vitro. J Dent (2014) 0.96
All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs). Dent Mater (2015) 0.94
Comparative reliability analyses of zirconium oxide and lithium disilicate restorations in vitro and in vivo. J Am Dent Assoc (2011) 0.92
Clinical performance of a lithia disilicate-based core ceramic for three-unit posterior FPDs. Int J Prosthodont (2004) 0.90
Comparison of the marginal fit of lithium disilicate crowns fabricated with CAD/CAM technology by using conventional impressions and two intraoral digital scanners. J Prosthet Dent (2015) 0.90
Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. J Mech Behav Biomed Mater (2013) 0.89
Approach for valuating the significance of laboratory simulation. J Dent (2008) 0.89
Fracture resistance of different partial-coverage ceramic molar restorations: An in vitro investigation. J Am Dent Assoc (2006) 0.87
3D and 2D marginal fit of pressed and CAD/CAM lithium disilicate crowns made from digital and conventional impressions. J Prosthodont (2014) 0.87
Successful use of a single-retainer all-ceramic resin-bonded fixed partial denture for replacement of a maxillary canine: a clinical report. Quintessence Int (2007) 0.87
Monolithic and bi-layer CAD/CAM lithium-disilicate versus metal-ceramic fixed dental prostheses: comparison of fracture loads and failure modes after fatigue. Clin Oral Investig (2012) 0.86
Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites. J Mech Behav Biomed Mater (2015) 0.85
Prospective assessment of CAD/CAM zirconia abutment and lithium disilicate crown restorations: 2.4 year results. J Prosthet Dent (2016) 0.85
Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing. J Dent (2014) 0.84
Adhesive luting of new CAD/CAM materials. Int J Comput Dent (2015) 0.82
Marginal and internal fit of heat pressed versus CAD/CAM fabricated all-ceramic onlays after exposure to thermo-mechanical fatigue. J Dent (2013) 0.82
Fracture load of monolithic CAD/CAM lithium disilicate ceramic crowns and veneered zirconia crowns as a posterior implant restoration. Implant Dent (2013) 0.82
In vitro fracture load of monolithic lithium disilicate ceramic molar crowns with different wall thicknesses. Clin Oral Investig (2013) 0.82
Marginal and internal adaptation of ceramic crown restorations fabricated with CAD/CAM technology and the heat-press technique. J Prosthet Dent (2014) 0.82
Influence of hot pressing on the microstructure and fracture toughness of two pressable dental glass-ceramics. J Biomed Mater Res B Appl Biomater (2004) 0.81
Dynamic fatigue and fracture resistance of non-retentive all-ceramic full-coverage molar restorations. Influence of ceramic material and preparation design. Dent Mater (2010) 0.81
Microstructural evolution and physical behavior of a lithium disilicate glass-ceramic. Dent Mater (2015) 0.80
Six-year clinical performance of lithium disilicate fixed partial dentures. Int J Prosthodont (2011) 0.80
Micro-computed tomography evaluation of marginal fit of lithium disilicate crowns fabricated by using chairside CAD/CAM systems or the heat-pressing technique. J Prosthet Dent (2014) 0.80
Influence of veneer application on fracture behavior of lithium-disilicate-based ceramic crowns. Dent Mater (2012) 0.80
Wear performance of monolithic dental ceramics with different surface treatments. Quintessence Int (2013) 0.80
Influence of zirconia abutment preparation on the fracture strength of single implant lithium disilicate crowns after chewing simulation. Clin Oral Implants Res (2012) 0.80
Surface treatments for repair of feldspathic, leucite - and lithium disilicate-reinforced glass ceramics using composite resin. Braz Dent J (2015) 0.79
Monolithic Lithium Disilicate Full-Contour Crowns Bonded on CAD/CAM Zirconia Complete-Arch Implant Bridges With 3 to 5 Years of Follow-Up. J Oral Implantol (2013) 0.79
Marginal and Internal Fit of Conventional Metal-Ceramic and Lithium Disilicate CAD/CAM Crowns. Int J Prosthodont (2015) 0.79
Tooth-colored CAD/CAM monolithic restorations. Int J Comput Dent (2015) 0.79
Fracture Resistance of Molar Crowns Fabricated with Monolithic All-Ceramic CAD/CAM Materials Cemented on Titanium Abutments: An In Vitro Study. J Prosthodont (2015) 0.78
Influence of veneer and cyclic loading on failure behavior of lithium disilicate glass-ceramic molar crowns. Dent Mater (2013) 0.78
Proliferation and adhesion capability of human gingival fibroblasts onto zirconia, lithium disilicate and feldspathic veneering ceramic in vitro. Dent Mater J (2014) 0.78
Randomized clinical trial on single retainer all-ceramic resin-bonded fixed partial dentures: Influence of the bonding system after up to 55 months. J Dent (2012) 0.78
Assessment of the Internal Fit of Lithium Disilicate Crowns Using Micro-CT. J Prosthodont (2015) 0.78
The effect of spark plasma sintering on lithium disilicate glass-ceramics. Dent Mater (2015) 0.78
Fracture strength of all-ceramic lithium disilicate and porcelain-fused-to-metal bridges for molar replacement after dynamic loading. Eur J Prosthodont Restor Dent (2002) 0.78
Influence of Adhesive Core Buildup Designs on the Resistance of Endodontically Treated Molars Restored With Lithium Disilicate CAD/CAM Crowns. Oper Dent (2015) 0.78
Fatigue resistance of CAD/CAM complete crowns with a simplified cementation process. J Prosthet Dent (2014) 0.77
Human epithelial tissue culture study on restorative materials. J Dent (2013) 0.76
Retrospective survival analysis of 110 lithium disilicate crowns with feather-edge marginal preparation. Int J Esthet Dent (2015) 0.76
Evaluation of marginal fit of 2 CAD-CAM anatomic contour zirconia crown systems and lithium disilicate glass-ceramic crown. J Adv Prosthodont (2015) 0.76
Influence of restoration thickness and dental bonding surface on the fracture resistance of full-coverage occlusal veneers made from lithium disilicate ceramic. Dent Mater (2015) 0.76
Wear behavior of pressable lithium disilicate glass ceramic. J Biomed Mater Res B Appl Biomater (2015) 0.76
Effect of simulated mastication on the surface roughness of three ceramic systems. J Prosthet Dent (2015) 0.76
Fracture load of different crown systems on zirconia implant abutments. Dent Mater (2010) 0.76
Minimally invasive preparation and design of a cantilevered, all-ceramic, resin-bonded, fixed partial denture in the esthetic zone: a case report and descriptive review. J Esthet Restor Dent (2013) 0.76
Evaluation of fracture resistance in aqueous environment under dynamic loading of lithium disilicate restorative systems for posterior applications. Part 2. J Prosthodont (2014) 0.76
Wear behavior of human enamel against lithium disilicate glass ceramic and type III gold. J Prosthet Dent (2014) 0.76
A short-term clinical evaluation of IPS Empress 2 crowns. Int J Prosthodont (2007) 0.76
Survival rate of lithium disilicate restorations at 4 years: A retrospective study. J Prosthet Dent (2015) 0.76
Eleven-Year Retrospective Survival Study of 275 Veneered Lithium Disilicate Single Crowns. Int J Periodontics Restorative Dent (2015) 0.76
Investigation of the fatigue behavior of adhesive bonding of the lithium disilicate glass ceramic with three resin cements using rotating fatigue method. J Mech Behav Biomed Mater (2016) 0.76
Survival rates of a lithium disilicate-based core ceramic for three-unit esthetic fixed partial dentures: a 10-year prospective study. Int J Prosthodont (2013) 0.76
Machinability of lithium disilicate glass ceramic in in vitro dental diamond bur adjusting process. J Mech Behav Biomed Mater (2015) 0.76
Tribological behaviour of unveneered and veneered lithium disilicate dental material. J Mech Behav Biomed Mater (2015) 0.76
Stiffness, Strength, and Failure Modes of Implant-Supported Monolithic Lithium Disilicate Crowns: Influence of Titanium and Zirconia Abutments. Int J Oral Maxillofac Implants (2015) 0.76
Prospective clinical split-mouth study of pressed and CAD/CAM all-ceramic partial-coverage restorations: 7-year results. Int J Prosthodont (2013) 0.76
Use of molecular indicators of inflammation to assess the biocompatibility of all-ceramic restorations. J Clin Periodontol (2016) 0.76
A novel approach to implant screw-retained restorations: adhesive combination between zirconia frameworks and monolithic lithium disilicate. Int J Esthet Dent (2014) 0.75
Single-tooth replacement in the anterior arch by means of a cantilevered IPS e.max Press veneer-retained fixed partial denture: case series of 35 patients. Int J Prosthodont (2013) 0.75
Digitally enhanced dentistry: the power of digital design. J Calif Dent Assoc (2015) 0.75
Lithium Disilicate Restorations Fatigue Testing Parameters: A Systematic Review. J Prosthodont (2015) 0.75