Published in J Bone Joint Surg Am on January 01, 1980
Failures of total hip arthroplasty and probable incidence of revision surgery in the future. Calculations according to a mathematical model based on a ten years' experience in total hip arthroplasty. Arch Orthop Trauma Surg (1983) 1.32
Factors to consider in joint prosthesis systems. Proc (Bayl Univ Med Cent) (2006) 0.79
Failure of the stem in total hip replacement. A study of aetiology and mechanism of failure in 13 cases. Arch Orthop Trauma Surg (1988) 0.76
A case of a C-stem fracture at the head-neck junction and a review of the literature. Case Rep Orthop (2012) 0.75
Revision of a fractured uncemented revision stem using a custom designed punch and retrograde through-knee approach. Case Rep Orthop (2015) 0.75
Hip and knee arthroplasty implants contraindicated in obesity. Ann R Coll Surg Engl (2016) 0.75
Exactech Opteon Femoral Component Fracture 12 Years after Arthroplasty. Case Rep Orthop (2016) 0.75
An analysis of blood management in patients having a total hip or knee arthroplasty. J Bone Joint Surg Am (1999) 5.17
Wear patterns on retrieved polyethylene tibial inserts and their relationship to technical considerations during total knee arthroplasty. Clin Orthop Relat Res (1994) 2.04
Metal release in patients who have had a primary total hip arthroplasty. A prospective, controlled, longitudinal study. J Bone Joint Surg Am (1998) 1.96
A study of lower-limb mechanics during stair-climbing. J Bone Joint Surg Am (1980) 1.89
Release and excretion of metal in patients who have a total hip-replacement component made of titanium-base alloy. J Bone Joint Surg Am (1991) 1.85
A relationship between gait and clinical changes following high tibial osteotomy. J Bone Joint Surg Am (1985) 1.82
The influence of total knee-replacement design on walking and stair-climbing. J Bone Joint Surg Am (1982) 1.78
Tensile properties of the human lumbar annulus fibrosus. Acta Orthop Scand (1967) 1.69
Local and distant products from modularity. Clin Orthop Relat Res (1995) 1.52
Walking speed as a basis for normal and abnormal gait measurements. J Biomech (1977) 1.44
Migration of corrosion products from modular hip prostheses. Particle microanalysis and histopathological findings. J Bone Joint Surg Am (1994) 1.44
Unicompartmental knee arthroplasty. Clinical experience at 6- to 10-year followup. Clin Orthop Relat Res (1999) 1.42
In vivo comparative wear study of traditional and highly cross-linked polyethylene in total hip arthroplasty. J Arthroplasty (2005) 1.41
Effect of pegs and screws on bone ingrowth in cementless total knee arthroplasty. Clin Orthop Relat Res (1994) 1.41
Metal ion release from titanium-based prosthetic segmental replacements of long bones in baboons: a long-term study. J Orthop Res (1984) 1.39
Endosteal erosion in association with stable uncemented femoral components. J Bone Joint Surg Am (1990) 1.31
Determinants of stress shielding: design versus materials versus interface. Clin Orthop Relat Res (1992) 1.31
Primary total hip reconstruction with a titanium fiber-coated prosthesis inserted without cement. J Bone Joint Surg Am (1993) 1.30
Analog studies of forces in the human spine: mechanical properties and motion segment behavior. J Biomech (1973) 1.29
The influence of walking mechanics and time on the results of proximal tibial osteotomy. J Bone Joint Surg Am (1990) 1.27
Primary total hip arthroplasty using noncemented porous-coated femoral components in patients with osteonecrosis of the femoral head. J Arthroplasty (1994) 1.26
Knee biomechanics and total knee replacement. J Arthroplasty (1986) 1.26
Bone resorption activity of particulate-stimulated macrophages. J Bone Miner Res (1993) 1.22
Macrophage/particle interactions: effect of size, composition and surface area. J Biomed Mater Res (1994) 1.22
Second-generation cementless total hip arthroplasty. Eight to eleven-year results. J Bone Joint Surg Am (2001) 1.20
Failed femoral stems in total hip prostheses. A report of six cases. J Bone Joint Surg Am (1975) 1.19
Long-term followup of the Miller-Galante total knee replacement. Clin Orthop Relat Res (2001) 1.17
The effects of particulate wear debris, cytokines, and growth factors on the functions of MG-63 osteoblasts. J Bone Joint Surg Am (2001) 1.13
Fixation, polyethylene wear, and pelvic osteolysis in primary total hip replacement. Clin Orthop Relat Res (1999) 1.12
Cementless acetabular reconstruction after acetabular fracture. J Bone Joint Surg Am (2001) 1.11
Composition and morphology of wear debris in failed uncemented total hip replacement. J Bone Joint Surg Br (1994) 1.11
Defects in failed stems of hip prostheses. J Biomed Mater Res (1978) 1.10
Revision total knee arthroplasty with a cemented posterior-stabilized or constrained condylar prosthesis: a minimum 3-year and average 5-year follow-up study. J Arthroplasty (1997) 1.09
Complications following total knee replacement. Clin Orthop Relat Res (1977) 1.09
ESB Research Award 1992. The mechanism of bone remodeling and resorption around press-fitted THA stems. J Biomech (1993) 1.09
Wear in total hip prostheses. An experimental evaluation of candidate materials. Acta Orthop Scand Suppl (1973) 1.08
Gait compensations in patients with osteoarthritis of the hip and their relationship to pain and passive hip motion. J Orthop Res (1997) 1.08
Segmental replacement of long bones in baboons using a fiber titanium implant. J Bone Joint Surg Am (1978) 1.07
A stress analysis of the femoral stem in total hip prostheses. J Bone Joint Surg Am (1976) 1.07
Problems with cementless total knee arthroplasty at 11 years followup. Clin Orthop Relat Res (2001) 1.06
Changes in the gait patterns of growing children. J Bone Joint Surg Am (1981) 1.05
Retention of the posterior cruciate in total knee arthroplasty. J Arthroplasty (1988) 1.05
Metal release and excretion from cementless titanium alloy total knee replacements. Clin Orthop Relat Res (1999) 1.04
Functional adaptation and ingrowth of bone vary as a function of hip implant stiffness. J Biomech (1998) 1.04
Thromboembolic disease in patients undergoing total knee replacement. J Bone Joint Surg Am (1976) 1.03
A quantitative study of bone and soft tissues in cementless porous-coated acetabular components retrieved at autopsy. J Arthroplasty (1993) 1.03
Revision, without cement, of aseptically loose, cemented total hip prostheses. Quantitative comparison of the effects of four types of medullary treatment on bone ingrowth in a canine model. J Bone Joint Surg Am (1993) 1.03
Primary cementless acetabular reconstruction in patients younger than 50 years old. 7- to 11-year results. Clin Orthop Relat Res (1997) 1.02
Human monocyte response to particulate biomaterials generated in vivo and in vitro. J Orthop Res (1995) 1.01
Spondylolisthesis and tight hamstrings. J Bone Joint Surg Am (1970) 1.00
Primary total hip arthroplasty with a porous-coated acetabular component. Seven-to-ten-year results. J Bone Joint Surg Am (1997) 0.99
Adaptive bone remodeling around bonded noncemented total hip arthroplasty: a comparison between animal experiments and computer simulation. J Orthop Res (1993) 0.97
Finite element stress analysis of an intervertebral disc. J Biomech (1974) 0.97
Revision of the acetabular component without cement after total hip arthroplasty. Three to six-year follow-up. J Bone Joint Surg Am (1993) 0.96
Patellar component failure in cementless total knee arthroplasty. Clin Orthop Relat Res (1988) 0.95
Mechanisms of bone loss associated with total hip replacement. Orthop Clin North Am (1993) 0.94
Complications of a cable grip system. J Arthroplasty (1996) 0.94
Metallosis associated with a stable titanium-alloy femoral component in total hip replacement. A case report. J Bone Joint Surg Am (1990) 0.94
Stem curvature and load angle influence the initial relative bone-implant motion of cementless femoral stems. J Orthop Res (1993) 0.93
Cellular mediators secreted by interfacial membranes obtained at revision total hip arthroplasty. J Arthroplasty (1995) 0.93
Impacted particulate allograft for femoral revision total hip arthroplasty. In vitro mechanical stability and effects of cement pressurization. J Arthroplasty (1996) 0.93
Salvage of infected total knee arthroplasty. Clin Orthop Relat Res (1988) 0.91
The bone-implant interface of femoral stems with non-circumferential porous coating. J Bone Joint Surg Am (1996) 0.91
Bone ingrowth and wear debris in well-fixed cementless porous-coated tibial components removed from patients. J Arthroplasty (1995) 0.90
Cementless acetabular revision. Evaluation at an average of 10.5 years. Clin Orthop Relat Res (1999) 0.90
Enhancement of bone ingrowth by transforming growth factor-beta. J Bone Joint Surg Am (1995) 0.89
Posterior cruciate ligament-retaining total knee arthroplasty in patients with rheumatoid arthritis. J Bone Joint Surg Am (2001) 0.89
Hybrid total hip arthroplasty with a precoated offset stem. Four to nine-year results. J Bone Joint Surg Am (2000) 0.88
Analog studies of forces in the human spine: computational techniques. J Biomech (1973) 0.88
Locally delivered rhTGF-beta2 enhances bone ingrowth and bone regeneration at local and remote sites of skeletal injury. J Orthop Res (2001) 0.88
Calcium phosphate-coated porous titanium implants for enhanced skeletal fixation. J Biomed Mater Res (1988) 0.87
Histology of porous-coated acetabular components. 25 cementless cups retrieved after arthroplasty. Acta Orthop Scand (1993) 0.87
Three dimensional stress analysis of the femoral stem of a total hip prosthesis. J Biomech (1980) 0.87
Altered load history affects periprosthetic bone loss following cementless total hip arthroplasty. J Orthop Res (1996) 0.87
Impaction allografting with cement for revision of the femoral component. A minimum four-year follow-up study with use of a precoated femoral stem. J Bone Joint Surg Am (1999) 0.87
Patellofemoral design influences function following total knee arthroplasty. J Arthroplasty (1997) 0.86
Efficacy of intraoperative cultures obtained during revision total hip arthroplasty. J Arthroplasty (1995) 0.86
Current concepts in orthopaedic biomaterials and implant fixation. Instr Course Lect (1994) 0.86
Revision of the acetabular component without cement after total hip arthroplasty. A follow-up note regarding results at seven to eleven years. J Bone Joint Surg Am (1996) 0.86
A comparative study of porous coatings in a weight-bearing total hip-arthroplasty model. J Bone Joint Surg Am (1986) 0.85
Hip motion and moments during gait relate directly to proximal femoral bone mineral density in patients with hip osteoarthritis. J Biomech (1998) 0.85
Total hip replacement with insertion of an acetabular component without cement and a femoral component with cement. Four to seven-year results. J Bone Joint Surg Am (1995) 0.85
Malignant neoplasms associated with orthopedic implant materials in rats. J Orthop Res (1986) 0.85
The potential role of fibroblasts in periprosthetic osteolysis: fibroblast response to titanium particles. J Bone Miner Res (1995) 0.84
Miller-Galante unicompartmental knee arthroplasty at 2- to 5-year follow-up evaluations. J Arthroplasty (1995) 0.84
Clinical results of total knee revision using the Total Condylar III prosthesis. Clin Orthop Relat Res (1991) 0.84
Revision total hip arthroplasty without cement: subsidence of proximally porous-coated femoral components. J Bone Joint Surg Am (1995) 0.83
A comparison of cemented and cementless fixation with the Miller-Galante total knee arthroplasty. Orthop Clin North Am (1989) 0.83
Revision total hip arthroplasty using a cementless acetabular component. Technique and results. Clin Orthop Relat Res (1995) 0.83
Biocompatibility of Delrin 150: a creep-resistant polymer for total joint prostheses. J Biomed Mater Res (1986) 0.83
The prosthesis-bone interface adjacent to tibial components inserted without cement. Clinical and radiographic follow-up at nine to twelve years. J Bone Joint Surg Am (1996) 0.82
The fate of well fixed cemented femoral components left in place at the time of revision of the acetabular component. J Bone Joint Surg Am (1997) 0.82
Contact pressure dependence of wear rates of ultra high molecular weight polyethylene. J Biomed Mater Res (1979) 0.82
Cemented and ingrowth fixation of the Miller-Galante prosthesis. Clinical and roentgenographic comparison after three- to six-year follow-up studies. Clin Orthop Relat Res (1990) 0.82
Systemic metal-protein binding associated with total joint replacement arthroplasty. J Biomed Mater Res (2000) 0.82
Maintenance of proximal cortical bone with use of a less stiff femoral component in hemiarthroplasty of the hip without cement. An investigation in a canine model at six months and two years. J Bone Joint Surg Am (1997) 0.81
The influence of femoral stem thickness and implantation technique on the strength of the bone cement bond. Acta Orthop Scand (1982) 0.81
Effects of particles on fibroblast proliferation and bone resorption in vitro. Clin Orthop Relat Res (1997) 0.81
Efficacy of autograft and freeze-dried allograft to enhance fixation of porous coated implants in the presence of interface gaps. J Orthop Res (1992) 0.80
A relationship between stem orientation and function following total hip arthroplasty. J Arthroplasty (1991) 0.80