Published in J Dent Res on December 01, 1994
Fracture surface analysis of clinically failed fixed partial dentures. J Dent Res (2006) 1.35
Fractographic ceramic failure analysis using the replica technique. Dent Mater (2007) 1.17
Recent advances in materials for all-ceramic restorations. Dent Clin North Am (2007) 1.13
Statistical failure analysis of adhesive resin cement bonded dental ceramics. Eng Fract Mech (2007) 1.10
Dynamic fatigue and strength characterization of three ceramic materials. J Mater Sci Mater Med (2007) 0.99
Subcritical crack growth in porcelains, glass-ceramics, and glass-infiltrated alumina composite for dental restorations. J Mater Sci Mater Med (2008) 0.86
Fractographic analysis of a dental zirconia framework: a case study on design issues. J Mech Behav Biomed Mater (2010) 0.82
Comparison of two fracture toughness testing methods using a glass-infiltrated and a zirconia dental ceramic. J Adv Prosthodont (2013) 0.80
Simulation of clinical fractures for three different all-ceramic crowns. Eur J Oral Sci (2014) 0.79
3D statistical failure analysis of monolithic dental ceramic crowns. J Biomech (2016) 0.78
Contact damage in model dental multilayers: an investigation of the influence of indenter size. J Mater Sci Mater Med (2003) 0.78
Interfacial toughness of bilayer dental ceramics based on a short-bar, chevron-notch test. Dent Mater (2009) 0.78
Shear bond strength of resin cement to an acid etched and a laser irradiated ceramic surface. J Adv Prosthodont (2013) 0.77
Step-stress analysis for predicting dental ceramic reliability. Dent Mater (2013) 0.76
Influence of Connector Width on the Stress Distribution of Posterior Bridges under Loading. J Dent (Tehran) (2011) 0.75
Fatigue loading and R-curve behavior of a dental glass-ceramic with multiple flaw distributions. Dent Mater (2013) 0.75
Fracture toughness improvements of dental ceramic through use of yttria-stabilized zirconia (YSZ) thin-film coatings. Dent Mater (2013) 0.75
Stress intensity factor threshold in dental porcelains. J Mater Sci Mater Med (2007) 0.75
Survival Predictions of Ceramic Crowns Using Statistical Fracture Mechanics. J Dent Res (2017) 0.75
Influence of thermal and mechanical fatigue on the shear bond strength of different all-ceramic systems. J Clin Exp Dent (2017) 0.75
Minimal intervention dentistry--a review. FDI Commission Project 1-97. Int Dent J (2000) 1.85
Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent (2000) 1.66
Influence of test method on failure stress of brittle dental materials. J Dent Res (1990) 1.43
Clinical factors of importance to successful implant therapy. Preface. J Oral Maxillofac Surg (1997) 1.42
Fracture surface analysis of clinically failed fixed partial dentures. J Dent Res (2006) 1.35
Influence of connector design on fracture probability of ceramic fixed-partial dentures. J Dent Res (2002) 1.25
Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper Dent (2001) 1.11
Contrast ratio of veneering and core ceramics as a function of thickness. Int J Prosthodont (2001) 1.11
Microtensile strength of composite bonded to hot-pressed ceramics. J Adhes Dent (2000) 1.08
The influence of bone thickness on facial marginal bone response: stage 1 placement through stage 2 uncovering. Ann Periodontol (2000) 1.01
The influence of preoperative antibiotics on success of endosseous implants at 36 months. Ann Periodontol (2000) 0.99
Implant survival to 36 months as related to length and diameter. Ann Periodontol (2000) 0.95
The influence of preoperative antibiotics on success of endosseous implants up to and including stage II surgery: a study of 2,641 implants. J Oral Maxillofac Surg (1997) 0.94
Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness. J Dent Res (2000) 0.93
Interactive effect of stress and temperature on creep of PFM alloys. J Dent Res (1985) 0.93
Recasting a nickel-chromium alloy. J Prosthet Dent (1986) 0.93
The influence of 0.12% chlorhexidine digluconate rinses on the incidence of infectious complications and implant success. J Oral Maxillofac Surg (1997) 0.93
Thermal expansion of dental alloys and porcelains. J Biomed Mater Res (1980) 0.92
The influence of smoking on 3-year clinical success of osseointegrated dental implants. Ann Periodontol (2000) 0.92
Comparative evaluation of ceramic-metal bond tests using finite element stress analysis. J Dent Res (1980) 0.92
Effect of metal design on marginal distortion of metal-ceramic crowns. J Dent Res (1984) 0.90
Three-dimensional finite element analysis of the shear bond test. Dent Mater (1995) 0.88
Distribution of bone quality in patients receiving endosseous dental implants. J Oral Maxillofac Surg (1997) 0.88
Effect of incompatibility stress on the fit of metal-ceramic crowns. J Dent Res (1987) 0.87
Three-dimensional finite element analysis of glass-ceramic dental crowns. J Biomech (1990) 0.86
Stability of implants and natural teeth as determined by the Periotest over 60 months of function. J Oral Implantol (2001) 0.86
Effects of flaw size and auto-glaze treatment on porcelain strength. J Dent Res (1996) 0.85
Assessment of implant mobility at second-stage surgery with the Periotest: DICRG Interim Report No. 3. Dental Implant Clinical Research Group. Implant Dent (1994) 0.85
Long-term assessment (5 to 71 months) of endosseous dental implants placed in the augmented maxillary sinus. Ann Periodontol (2000) 0.85
Bonding mechanism evidence in a ceramic--nonprecious alloy system. J Biomed Mater Res (1977) 0.85
Stress distribution in metal-ceramic crowns with a facial porcelain margin. J Dent Res (1987) 0.85
Influence of framework design, contraction mismatch, and thermal history on porcelain checking in fixed partial dentures. Dent Mater (1989) 0.83
Analysis of tempering stresses in metal-ceramic disks. J Dent Res (1996) 0.83
Influence of contraction mismatch and cooling rate on flexural failure of PFM systems. J Dent Res (1988) 0.82
Positive effect of surgical experience with implants on second-stage implant survival. J Oral Maxillofac Surg (1997) 0.82
Second-stage failures related to bone quality in patients receiving endosseous dental implants: DICRG Interim Report No. 7. Dental Implant Clinical Research Group. Implant Dent (1994) 0.82
Adherence controlling elements in ceramic-metal systems. II. Nonprecious alloys. J Dent Res (1977) 0.81
Influence of glass-ceramic thickness on Hertzian and bulk fracture mechanisms. Int J Prosthodont (1998) 0.80
Fluoride and chlorhexidine release from filled resins. J Dent Res (2010) 0.80
Processing changes in complete dentures constructed from pour resins. J Am Dent Assoc (1971) 0.80
An evaluation of the four-point flexural test for metal-ceramic bond strength. J Dent Res (1982) 0.80
Thermal incompatibility analysis of metal-ceramic systems based on flexural displacement data. J Biomed Mater Res (1998) 0.79
Implant surface coating and bone quality-related survival outcomes through 36 months post-placement of root-form endosseous dental implants. Ann Periodontol (2000) 0.79
The influence of bone quality on Periotest values of endosseous dental implants at stage II surgery. J Oral Maxillofac Surg (1997) 0.79
Porcelain-metal thermal compatibility. J Dent Res (1981) 0.79
Treatment regimens in preventive and restorative dentistry. J Am Dent Assoc (1995) 0.79
Veterans Administration Cooperative Studies Project No. 147. Part IV: Biocompatibility of base metal alloys. J Prosthet Dent (1987) 0.79
Flexure test evaluation of presoldered base metal alloys. J Prosthet Dent (1985) 0.79
Postmortem histologic evaluation of mandibular titanium and maxillary hydroxyapatite-coated implants from 1 patient. Int J Oral Maxillofac Implants (1999) 0.79
Fracture resistance of all-ceramic and metal-ceramic inlays. Int J Prosthodont (2002) 0.78
Three-year post-placement survival of implants mobile at placement. Ann Periodontol (2000) 0.78
Comparison of the performance on prosthodontic criteria of several alternative alloys used for fixed crown and partial denture restorations: Department of Veterans Affairs Cooperative Studies project 147. J Prosthet Dent (1993) 0.78
The effect of smoking on implant survival at second-stage surgery: DICRG Interim Report No. 5. Dental Implant CLinical Research Group. Implant Dent (1994) 0.78
Changes in mechanical properties and microstructure following heat treatment of a nickel-chromium base alloy. J Prosthet Dent (1984) 0.78
Viscoelastic stress analysis of thermally compatible and incompatible metal-ceramic systems. Dent Mater (1998) 0.78
Inert gas presoldering of nickel-chromium alloys. J Prosthet Dent (1986) 0.78
Effect of loading conditions on bi-axial flexure strength of dental cements. Dent Mater (1992) 0.78
The influence of type of incision on the success rate of implant integration at stage II uncovering surgery. J Oral Maxillofac Surg (1997) 0.78
Stability of the bone-implant complex. Results of longitudinal testing to 60 months with the Periotest device on endosseous dental implants. Ann Periodontol (2000) 0.77
Periotest values of dental implants in the first 2 years after second-stage surgery: DICRG interim report no. 8. Dental Implant Clinical Research Group. Implant Dent (1997) 0.77
Visual and profilometric wear measurements. Acta Odontol Scand (1992) 0.77
An evaluation of the Periotest system. Part I: Examiner reliability and repeatability of readings. Dental Implant Clinical Group (Planning Committee). Implant Dent (1992) 0.77
The influence of implant type, material, coating, diameter, and length on periotest values at second-stage surgery: DICRG interim report no. 4. Dental Implant Clinical Research Group. Implant Dent (1994) 0.77
Noble metal alloys for metal-ceramic restorations. Dent Clin North Am (1985) 0.77
Apparent interfacial fracture toughness of resin/ceramic systems. J Dent Res (2006) 0.77
Guidelines for experimental studies. Dent Mater (1994) 0.77
Adherence controlling elements in ceramic-metal systems. I. Precious alloys. J Dent Res (1977) 0.77
Bone quality and implant design-related outcomes through stage II surgical uncovering of Spectra-System root form implants. J Oral Maxillofac Surg (1997) 0.77
A review of panoramic radiography and its potential use in implant dentistry. Implant Dent (1993) 0.76
Influence of metal thickness on stress distribution in metal-ceramic crowns. J Dent Res (1986) 0.76
Factors affecting implant mobility at placement and integration of mobile implants at uncovering. J Periodontol (1998) 0.76
The influence of heat treatments on several types of base-metal removable partial denture alloys. J Prosthet Dent (1979) 0.76
Effect of surface etching on the flexure strength and fracture toughness of Dicor disks containing controlled flaws. J Dent Res (1994) 0.75
Castability of silver-base fixed partial denture alloys. J Prosthet Dent (1985) 0.75
Surface degradation of dental ceramics as a function of environmental pH. J Dent Res (2013) 0.75
Money matters. J Am Dent Assoc (1999) 0.75
Influence of polishing on cast clasp properties. J Prosthet Dent (1986) 0.75
Veterans Administration Cooperative Studies Project No. 147. Part II: A new assessment system for rating metal-ceramic crowns. J Prosthet Dent (1986) 0.75
An evaluation of the Periotest system. Part II: Reliability and repeatability of instruments. Dental Implant Clinical Research Group (Planning Committee). Implant Dent (1992) 0.75
Marginal distortion of thermally incompatible metal ceramic crowns with overextended margins. Int J Prosthodont (1998) 0.75
Stress-relaxation testing. Part IV: Clasp pattern dimensions and their influence on clasp behavior. J Prosthet Dent (1983) 0.75
Veterans Administration Cooperative Studies Project No. 147. Part III: Assessment of blindness in a clinical evaluation of alternative alloys for metal-ceramic crowns. J Prosthet Dent (1986) 0.75
The need for well-controlled clinical studies. Implant Dent (1997) 0.75
Influence of fabrication technique on wrought wire clasp flexibility. J Prosthet Dent (1985) 0.75
Characterization of denture bases for people of color. J Am Dent Assoc (1970) 0.75
Postmortem histologic evaluation of hydroxyapatite-coated cylinder and titanium alloy basket implants in situ for 37 months in the posterior mandible. Dental Implant Clinical Research Group. Implant Dent (1997) 0.75
Insecticide residues in cattle treated with a cypermethrin, chlorpyrifos, piperonyl butoxide-impregnated ear tag. Bull Environ Contam Toxicol (1986) 0.75
Evaluation of the interprobe electronic periodontal probe. Implant Dent (1992) 0.75
The influence of maxillary sinus augmentation on the success of dental implants through second-stage surgery. Implant Dent (1997) 0.75
The efficacy of a counter-rotational powered toothbrush in the maintenance of endosseous dental implants. J Am Dent Assoc (2000) 0.75
Reduction of methyl parathion residues on clothing by delayed field re-entry and laundering. Bull Environ Contam Toxicol (1979) 0.75
Doses and residues of acephate baits used to eradicate undesirable honey bees: a hazard assessment. Bull Environ Contam Toxicol (1991) 0.75
Stress-relaxation testing. Part II: comparison of bending profiles, microstructures, microhardnesses, and surface characteristics of several wrought wires. J Prosthet Dent (1981) 0.75
Variables affecting survival of single-tooth hydroxyapatite-coated implants in anterior maxillae at 3 years. Ann Periodontol (2000) 0.75
Patient demographics and implant survival at uncovering: Dental Implant Clinical Research Group Interim Report No. 6. Implant Dent (1994) 0.75
Veterans Administration Cooperative Studies Project No. 147. Part I: A multidisciplinary, multicenter experimental design for the evaluation of alternative metal-ceramic alloys. J Prosthet Dent (1986) 0.75
Stress-relaxation testing. Part I: A new approach to the testing of removable partial denture alloys, wrought wires, and clasp behavior. J Prosthet Dent (1981) 0.75
Investing mediums for pour resins. J Am Dent Assoc (1971) 0.75
Stress-relaxation testing. Part III: Influence of wire alloys, gauges, and lengths on clasp behavior. J Prosthet Dent (1981) 0.75