Published in Int J Oral Maxillofac Implants on September 20, 2000
A Simple and Cost Effective Method used for Removal of a Fractured Implant Abutment Screw: A Case Report. J Int Oral Health (2013) 0.85
Influence of the implant-abutment connection design and diameter on the screw joint stability. J Adv Prosthodont (2014) 0.83
Marginal bone response of implants with platform switching and non-platform switching abutments in posterior healed sites: a 1-year prospective study. Clin Oral Implants Res (2014) 0.82
Influence of the implant abutment types and the dynamic loading on initial screw loosening. J Adv Prosthodont (2013) 0.82
Narrow-diameter implants with conical connection for restoring the posterior edentulous region. Maxillofac Plast Reconstr Surg (2016) 0.79
Long-term cumulative survival and mechanical complications of single-tooth Ankylos Implants: focus on the abutment neck fractures. J Adv Prosthodont (2015) 0.78
In vitro analysis of the microbiological sealing of tapered implants after mechanical cycling. Clin Oral Investig (2016) 0.78
Analytical and experimental position stability of the abutment in different dental implant systems with a conical implant-abutment connection. Clin Oral Investig (2012) 0.78
Influence of the connection design and titanium grades of the implant complex on resistance under static loading. J Adv Prosthodont (2016) 0.75
Effect of tightening torque on the marginal adaptation of cement-retained implant-supported fixed dental prostheses. Dent Res J (Isfahan) (2015) 0.75
In Vitro Evaluation of Bacterial Leakage at Implant-Abutment Connection: An 11-Degree Morse Taper Compared to a Butt Joint Connection. Int J Biomater (2016) 0.75
Influence of abutment materials on the implant-abutment joint stability in internal conical connection type implant systems. J Adv Prosthodont (2014) 0.75
Compressive fatigue in titanium dental implants submitted to fluoride ions action. J Appl Oral Sci (2007) 0.75
Evaluation of stability of interface between CCM (Co-Cr-Mo) UCLA abutment and external hex implant. J Adv Prosthodont (2016) 0.75
The change of rotational freedom following different insertion torques in three implant systems with implant driver. J Adv Prosthodont (2009) 0.75
Effect of cement washout on loosening of abutment screws and vice versa in screw- and cement- retained implant-supported dental prosthesis. J Adv Prosthodont (2015) 0.75
Microbiological Sealing Analysis of a Tapered Connection and External Hexagon System. Int J Dent (2017) 0.75
Biomechanical effects of the implant material and implant-abutment interface in immediately loaded small-diameter implants. Clin Oral Investig (2013) 0.75
External versus internal abutment connection implants: a survey of opinions and decision making among experienced implant dentists in Japan. Odontology (2013) 0.75
Long-term evaluation of non-submerged ITI implants. Part 1: 8-year life table analysis of a prospective multi-center study with 2359 implants. Clin Oral Implants Res (1997) 1.72
Restoration-driven implant placement with restoration-generated site development. Compend Contin Educ Dent (1995) 1.65
Stress fatigue: basic principles and prosthodontic implications. Int J Prosthodont (1995) 1.10
Stimulating effect of implant loading on surrounding bone. Comparison of three numerical models and validation by in vivo data. Clin Oral Implants Res (2004) 1.08
Fit of three porcelain-fused-to-metal marginal designs in vivo: a scanning electron microscope study. J Prosthet Dent (1985) 0.97
Localized ridge augmentation using guided bone regeneration. II. Surgical procedure in the mandible. Int J Periodontics Restorative Dent (1995) 0.96
Accuracy of vertical height measurements on direct digital panoramic radiographs using posterior mandibular implants and metal balls as reference objects. Dentomaxillofac Radiol (2013) 0.96
Polymerization shrinkage of index and pattern acrylic resins. J Prosthet Dent (1990) 0.96
Lack of integration of smooth titanium surfaces: a working hypothesis based on strains generated in the surrounding bone. Clin Oral Implants Res (1999) 0.95
Crack propensity of porcelain laminate veneers: A simulated operatory evaluation. J Prosthet Dent (1999) 0.92
Mechanical characterization of bovine periodontal ligament. J Periodontal Res (2002) 0.91
Localized ridge augmentation with autografts and barrier membranes. Periodontol 2000 (1999) 0.88
Long-term stability of early implant placement with contour augmentation. J Dent Res (2013) 0.85
Bioengineered periodontal tissue formed on titanium dental implants. J Dent Res (2010) 0.84
Effect of cement film thickness on the fracture resistance of a machinable glass-ceramic. Dent Mater (1994) 0.84
The influence of altered working-side occlusal guidance on masticatory muscles and related jaw movement. J Prosthet Dent (1985) 0.83
Incidence of fractures and lifetime predictions of all-ceramic crown systems using censored data. Am J Dent (2001) 0.83
The effect of film thickness and surface texture on the resistance of cemented extracoronal restorations to lateral fatigue loading. Int J Prosthodont (2000) 0.83
Clinical performance of novel-design porcelain veneers for the recovery of coronal volume and length. Int J Periodontics Restorative Dent (2000) 0.82
The original one-stage dental implant system and its clinical application. Periodontol 2000 (1998) 0.82
Fixed restorations produced by commercial dental laboratories in Vancouver and Geneva. J Oral Rehabil (1988) 0.81
Fatigue resistance of soldered joints: a methodological study. Dent Mater (1994) 0.81
A rationale for a simplified occlusal design in restorative dentistry: historical review and clinical guidelines. J Prosthet Dent (1995) 0.81
The effect of tooth preparation height and diameter on the resistance of complete crowns to fatigue loading. Int J Prosthodont (1998) 0.80
Mechanical resistance of cemented post and core buildups for ITI-Bonefit implants. Clin Oral Implants Res (1992) 0.80
The contribution of the deep fibers of the masseter muscle to selected tooth-clenching and chewing tasks. J Prosthet Dent (1986) 0.79
Mechanical and elemental characterization of solder joints and welds using a gold-palladium alloy. J Prosthet Dent (1997) 0.78
Mechanical and structural characteristics of commercially pure grade 2 Ti welds and solder joints. J Mater Sci Mater Med (2001) 0.78
Fracture resistance of human enamel and three all-ceramic crown systems on extracted teeth. Int J Prosthodont (1997) 0.78
Osseointegration of Brånemark fixtures using a single-step operating technique. A preliminary prospective one-year study in the edentulous mandible. Clin Oral Implants Res (1995) 0.78
Fracture toughness of aged dental composites in combined mode I and mode II loading. J Biomed Mater Res (2000) 0.78
Weibull parameters of composite resin bond strengths to porcelain and noble alloy using the Rocatec system. Dent Mater (2002) 0.78
Tensile bond strength of gold and porcelain inlays to extracted teeth using three cements. Int J Prosthodont (1995) 0.77
The relationship between abutment taper and resistance of cemented crowns to dynamic loading. Int J Prosthodont (1996) 0.77
Compressive and tensile zones in the cement interface of full crowns: a technical note on the concept of resistance. J Prosthodont (1999) 0.76
Effect of controlled oral hygiene procedures in patients with fixed prostheses. SSO Schweiz Monatsschr Zahnheilkd (1980) 0.75
Maximum bond strength of dental luting cement to amalgam alloy. J Dent Res (1989) 0.75
[Crown and bridgework prostheses. A survey of the literature]. SSO Schweiz Monatsschr Zahnheilkd (1978) 0.75
Effect of water exposure on the fracture toughness and flexure strength of a dental glass. Dent Mater (2001) 0.75
[Practical periodontal prophylaxis in crown and bridge prosthetics. Technical aspects illustrated by a case report]. Quintessenz Zahntech (1981) 0.75
Invisible supragingival crown margins: an in vitro study. Int J Prosthodont (1990) 0.75
Microstructures of brazings and welds using grade 2 commercially pure titanium. Int J Prosthodont (2002) 0.75
[Invisible crown margins (2). An in vitro study]. Quintessenz (1990) 0.75
[The adhesive bridge--alternative maintenance of dental spaces? A review]. Schweiz Monatsschr Zahnmed (1984) (1985) 0.75
[The overdenture and GTR technic. The treatment of periodontally damaged overdenture-abutment teeth using a modified GTR technic--2 pilot cases]. Schweiz Monatsschr Zahnmed (1992) 0.75
[Progress and current trends in oral implantology]. Schweiz Monatsschr Zahnmed (1998) 0.75
[Porcelain restoration materials: experimental studies of the adhesive strength of different products]. SSO Schweiz Monatsschr Zahnheilkd (1982) 0.75
[Endoscopy in endodontic surgery]. Schweiz Monatsschr Zahnmed (2001) 0.75
[Porcelain restoration materials: a clinical trial of Den-Mat and Ceramat]. SSO Schweiz Monatsschr Zahnheilkd (1982) 0.75
A new method to quantify wear using implant supported restorations. Dent Mater (2000) 0.75
[Periodontal conditions in patients with crowns and bridgework]. SSO Schweiz Monatsschr Zahnheilkd (1978) 0.75
Computer-aided design and transverse strength of screw-retained attachments. Int J Prosthodont (1995) 0.75
[The perforated cast adhesive bridge--the results of a longitudinal clinical study]. Schweiz Monatsschr Zahnmed (1984) (1985) 0.75
[Invisible crown margins--an in vitro study]. Quintessenz (1990) 0.75