Published in Clin Oral Implants Res on September 01, 1992
A Simple and Cost Effective Method used for Removal of a Fractured Implant Abutment Screw: A Case Report. J Int Oral Health (2013) 0.85
Long-term evaluation of non-submerged ITI implants. Part 1: 8-year life table analysis of a prospective multi-center study with 2359 implants. Clin Oral Implants Res (1997) 1.72
Restoration-driven implant placement with restoration-generated site development. Compend Contin Educ Dent (1995) 1.65
Mechanics of the implant-abutment connection: an 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants (2000) 1.20
Stress fatigue: basic principles and prosthodontic implications. Int J Prosthodont (1995) 1.10
Stimulating effect of implant loading on surrounding bone. Comparison of three numerical models and validation by in vivo data. Clin Oral Implants Res (2004) 1.08
Fit of three porcelain-fused-to-metal marginal designs in vivo: a scanning electron microscope study. J Prosthet Dent (1985) 0.97
Polymerization shrinkage of index and pattern acrylic resins. J Prosthet Dent (1990) 0.96
Accuracy of vertical height measurements on direct digital panoramic radiographs using posterior mandibular implants and metal balls as reference objects. Dentomaxillofac Radiol (2013) 0.96
Localized ridge augmentation using guided bone regeneration. II. Surgical procedure in the mandible. Int J Periodontics Restorative Dent (1995) 0.96
Lack of integration of smooth titanium surfaces: a working hypothesis based on strains generated in the surrounding bone. Clin Oral Implants Res (1999) 0.95
Crack propensity of porcelain laminate veneers: A simulated operatory evaluation. J Prosthet Dent (1999) 0.92
Mechanical characterization of bovine periodontal ligament. J Periodontal Res (2002) 0.91
Localized ridge augmentation with autografts and barrier membranes. Periodontol 2000 (1999) 0.88
Long-term stability of early implant placement with contour augmentation. J Dent Res (2013) 0.85
Bioengineered periodontal tissue formed on titanium dental implants. J Dent Res (2010) 0.84
Effect of cement film thickness on the fracture resistance of a machinable glass-ceramic. Dent Mater (1994) 0.84
The influence of altered working-side occlusal guidance on masticatory muscles and related jaw movement. J Prosthet Dent (1985) 0.83
Incidence of fractures and lifetime predictions of all-ceramic crown systems using censored data. Am J Dent (2001) 0.83
The effect of film thickness and surface texture on the resistance of cemented extracoronal restorations to lateral fatigue loading. Int J Prosthodont (2000) 0.83
Clinical performance of novel-design porcelain veneers for the recovery of coronal volume and length. Int J Periodontics Restorative Dent (2000) 0.82
The original one-stage dental implant system and its clinical application. Periodontol 2000 (1998) 0.82
A rationale for a simplified occlusal design in restorative dentistry: historical review and clinical guidelines. J Prosthet Dent (1995) 0.81
Fixed restorations produced by commercial dental laboratories in Vancouver and Geneva. J Oral Rehabil (1988) 0.81
Fatigue resistance of soldered joints: a methodological study. Dent Mater (1994) 0.81
The effect of tooth preparation height and diameter on the resistance of complete crowns to fatigue loading. Int J Prosthodont (1998) 0.80
The contribution of the deep fibers of the masseter muscle to selected tooth-clenching and chewing tasks. J Prosthet Dent (1986) 0.79
Mechanical and elemental characterization of solder joints and welds using a gold-palladium alloy. J Prosthet Dent (1997) 0.78
Osseointegration of Brånemark fixtures using a single-step operating technique. A preliminary prospective one-year study in the edentulous mandible. Clin Oral Implants Res (1995) 0.78
Weibull parameters of composite resin bond strengths to porcelain and noble alloy using the Rocatec system. Dent Mater (2002) 0.78
Fracture toughness of aged dental composites in combined mode I and mode II loading. J Biomed Mater Res (2000) 0.78
Mechanical and structural characteristics of commercially pure grade 2 Ti welds and solder joints. J Mater Sci Mater Med (2001) 0.78
Fracture resistance of human enamel and three all-ceramic crown systems on extracted teeth. Int J Prosthodont (1997) 0.78
Tensile bond strength of gold and porcelain inlays to extracted teeth using three cements. Int J Prosthodont (1995) 0.77
The relationship between abutment taper and resistance of cemented crowns to dynamic loading. Int J Prosthodont (1996) 0.77
Compressive and tensile zones in the cement interface of full crowns: a technical note on the concept of resistance. J Prosthodont (1999) 0.76
Computer-aided design and transverse strength of screw-retained attachments. Int J Prosthodont (1995) 0.75
[The overdenture and GTR technic. The treatment of periodontally damaged overdenture-abutment teeth using a modified GTR technic--2 pilot cases]. Schweiz Monatsschr Zahnmed (1992) 0.75
[The perforated cast adhesive bridge--the results of a longitudinal clinical study]. Schweiz Monatsschr Zahnmed (1984) (1985) 0.75
[Invisible crown margins--an in vitro study]. Quintessenz (1990) 0.75
[Porcelain restoration materials: experimental studies of the adhesive strength of different products]. SSO Schweiz Monatsschr Zahnheilkd (1982) 0.75
[Progress and current trends in oral implantology]. Schweiz Monatsschr Zahnmed (1998) 0.75
A new method to quantify wear using implant supported restorations. Dent Mater (2000) 0.75
[Porcelain restoration materials: a clinical trial of Den-Mat and Ceramat]. SSO Schweiz Monatsschr Zahnheilkd (1982) 0.75
Effect of water exposure on the fracture toughness and flexure strength of a dental glass. Dent Mater (2001) 0.75
Maximum bond strength of dental luting cement to amalgam alloy. J Dent Res (1989) 0.75
[Periodontal conditions in patients with crowns and bridgework]. SSO Schweiz Monatsschr Zahnheilkd (1978) 0.75
[Invisible crown margins (2). An in vitro study]. Quintessenz (1990) 0.75
Invisible supragingival crown margins: an in vitro study. Int J Prosthodont (1990) 0.75
[The adhesive bridge--alternative maintenance of dental spaces? A review]. Schweiz Monatsschr Zahnmed (1984) (1985) 0.75
Effect of controlled oral hygiene procedures in patients with fixed prostheses. SSO Schweiz Monatsschr Zahnheilkd (1980) 0.75
[Practical periodontal prophylaxis in crown and bridge prosthetics. Technical aspects illustrated by a case report]. Quintessenz Zahntech (1981) 0.75
[Crown and bridgework prostheses. A survey of the literature]. SSO Schweiz Monatsschr Zahnheilkd (1978) 0.75
Microstructures of brazings and welds using grade 2 commercially pure titanium. Int J Prosthodont (2002) 0.75