Published in Am J Dent on August 01, 2000
Effect of an additional hydrophilic versus hydrophobic coat on the quality of dentinal sealing provided by two-step etch-and-rinse adhesives. J Appl Oral Sci (2009) 0.84
Permeability of marginal hybrid layers in composite restorations. Clin Oral Investig (2005) 0.76
Influence of air abrasion and sonic technique on microtensile bond strength of one-step self-etch adhesive on human dentin. ScientificWorldJournal (2015) 0.75
Effect of Re-Etching of Oxalate-Occluded Dentin on Microleakage of Composite Resin Restorations. J Dent (Tehran) (2016) 0.75
Collagen degradation by host-derived enzymes during aging. J Dent Res (2004) 3.30
Chlorhexidine arrests subclinical degradation of dentin hybrid layers in vivo. J Dent Res (2005) 2.60
Limitations in bonding to dentin and experimental strategies to prevent bond degradation. J Dent Res (2011) 1.92
Zymographic analysis and characterization of MMP-2 and -9 forms in human sound dentin. J Dent Res (2007) 1.88
Chlorhexidine preserves dentin bond in vitro. J Dent Res (2007) 1.76
Bonding to Er-YAG-laser-treated dentin. J Dent Res (2002) 1.74
Reversal of compromised bonding to oxidized etched dentin. J Dent Res (2001) 1.65
Reversal of compromised bonding in bleached enamel. J Dent Res (2002) 1.58
Effect of resin hydrophilicity and water storage on resin strength. Biomaterials (2004) 1.53
Ultrastructural correlates of in vivo/in vitro bond degradation in self-etch adhesives. J Dent Res (2005) 1.50
Aggressiveness of contemporary self-etching adhesives. Part II: etching effects on unground enamel. Dent Mater (2001) 1.50
Effects of resin hydrophilicity on dentin bond strength. J Dent Res (2006) 1.45
The inhibitory effects of quaternary ammonium methacrylates on soluble and matrix-bound MMPs. J Dent Res (2011) 1.33
In vivo chlorhexidine stabilization of hybrid layers of an acetone-based dentin adhesive. Oper Dent (2009) 1.32
Cysteine cathepsins in human carious dentin. J Dent Res (2011) 1.32
Durability of resin-dentin bonds to water- vs. ethanol-saturated dentin. J Dent Res (2009) 1.26
Solvent-induced dimensional changes in EDTA-demineralized dentin matrix. J Biomed Mater Res (2001) 1.25
Fluid movement across the resin-dentin interface during and after bonding. J Dent Res (2004) 1.24
In vivo and in vitro permeability of one-step self-etch adhesives. J Dent Res (2004) 1.23
Ethanol wet-bonding challenges current anti-degradation strategy. J Dent Res (2010) 1.22
Effects of HEMA/solvent combinations on bond strength to dentin. J Dent Res (2003) 1.21
Bonding of self-etch and total-etch adhesives to carious dentin. J Dent Res (2002) 1.20
Carbodiimide cross-linking inactivates soluble and matrix-bound MMPs, in vitro. J Dent Res (2011) 1.12
Incompatibility of self-etch adhesives with chemical/dual-cured composites: two-step vs one-step systems. Oper Dent (2003) 1.12
The adhesion between fibre posts and composite resin cores: the evaluation of microtensile bond strength following various surface chemical treatments to posts. Int Endod J (2006) 1.11
Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites. Dent Mater (2001) 1.09
Effect of UVA-activated riboflavin on dentin bonding. J Dent Res (2011) 1.08
Effect of chlorhexidine incorporation into a self-etching primer on dentine bond strength of a luting cement. J Dent (2010) 1.08
Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine. J Dent (2004) 1.07
Chlorhexidine release and water sorption characteristics of chlorhexidine-incorporated hydrophobic/hydrophilic resins. Dent Mater (2008) 1.05
The use of oxalate to reduce dentin permeability under adhesive restorations. Am J Dent (2001) 1.05
Sealing properties of two contemporary single-cone obturation systems. Int Endod J (2007) 1.04
Dislocation resistance of ProRoot Endo Sealer, a calcium silicate-based root canal sealer, from radicular dentine. Int Endod J (2009) 1.02
Effect of phosphoric acid on the degradation of human dentin matrix. J Dent Res (2012) 0.99
Tubular occlusion optimizes bonding of hydrophobic resins to dentin. J Dent Res (2007) 0.98
Evaluation of a self-limiting concept in dentinal caries removal. J Dent Res (2006) 0.97
The critical barrier to progress in dentine bonding with the etch-and-rinse technique. J Dent (2011) 0.97
Bonding of contemporary glass ionomer cements to dentin. Dent Mater (2001) 0.97
Reduced antigenicity of type I collagen and proteoglycans in sclerotic dentin. J Dent Res (2006) 0.96
Effect of biomimetic remineralization on the dynamic nanomechanical properties of dentin hybrid layers. J Dent Res (2011) 0.96
Water concentration in self-etching primers affects their aggressiveness and bonding efficacy to dentin. J Dent Res (2005) 0.95
Evaluation of a new caries detecting dye for primary and permanent carious dentin. J Dent (2006) 0.95
Microscopic appearance and apical seal of root canals filled with gutta-percha and ProRoot Endo Sealer after immersion in a phosphate-containing fluid. Int Endod J (2008) 0.94
Canal and isthmus debridement efficacies of two irrigant agitation techniques in a closed system. Int Endod J (2010) 0.94
Effects of etch-and-rinse and self-etch adhesives on dentin MMP-2 and MMP-9. J Dent Res (2012) 0.94
Root canal debridement using manual dynamic agitation or the EndoVac for final irrigation in a closed system and an open system. Int Endod J (2010) 0.94
Effect of cyclic loading on the microtensile bond strengths of total-etch and self-etch adhesives. Oper Dent (2006) 0.93
Collagen degradation in endodontically treated teeth after clinical function. J Dent Res (2004) 0.93
A randomized controlled trial of endodontically treated and restored premolars. J Dent Res (2012) 0.92
Hygroscopic expansion of a compomer and a composite on artificial gap reduction. J Dent (2002) 0.92
Dimensional changes in acid-demineralized dentin matrices following the use of HEMA-water versus HEMA-alcohol primers. J Biomed Mater Res A (2003) 0.92
In vivo fluid movement through dentin adhesives in endodontically treated teeth. J Dent Res (2005) 0.92
MMP activity in the hybrid layer detected with in situ zymography. J Dent Res (2012) 0.92
Differential expression of matrix metalloproteinase-2 in human coronal and radicular sound and carious dentine. J Dent (2010) 0.91
Quantitative contribution of the collagen network in dentin hybridization. Am J Dent (1996) 0.91
Selection of restorative materials for the atraumatic restorative treatment (ART) approach: a review. Spec Care Dentist (2002) 0.90
Apical surgery: endoscopic findings at the resection level of 168 consecutively treated roots. Int Endod J (2011) 0.90
An ultrastructural study of the application of dentine adhesives to acid-conditioned sclerotic dentine. J Dent (2000) 0.89
Ethanol wet-bonding technique sensitivity assessed by AFM. J Dent Res (2010) 0.89
Localization of MMP-2, MMP-9, TIMP-1, and TIMP-2 in human coronal dentine. J Dent (2011) 0.89
Effect of 2% chlorhexidine on dentin microtensile bond strengths and nanoleakage of luting cements. J Dent (2009) 0.88
A nanoleakage perspective on bonding to oxidized dentin. J Dent Res (2002) 0.88
Influence of chlorhexidine on the degree of conversion and E-modulus of experimental adhesive blends. Dent Mater (2009) 0.88
Comparison of three methods of critical evaluation of microleakage along restorative interfaces. J Prosthet Dent (1995) 0.88
Incompatibility of oxalate desensitizers with acidic, fluoride-containing total-etch adhesives. J Dent Res (2005) 0.88
Implication of ethanol wet-bonding in hybrid layer remineralization. J Dent Res (2010) 0.88
Shear bond strength of Resilon to a methacrylate-based root canal sealer. Int Endod J (2005) 0.88
Hardness, elasticity, and ultrastructure of bonded sound and caries-affected primary tooth dentin. J Biomed Mater Res B Appl Biomater (2007) 0.87
Effect of proanthocyanidin incorporation into dental adhesive resin on resin-dentine bond strength. J Dent (2011) 0.87
The importance of size-exclusion characteristics of type I collagen in bonding to dentin matrices. Acta Biomater (2013) 0.87
Zinc reduces collagen degradation in demineralized human dentin explants. J Dent (2010) 0.87
Effects of different amounts of a low fluoride toothpaste on primary enamel lesion progression: a preliminary study using in vitro pH-cycling system. Eur Arch Paediatr Dent (2007) 0.87
Increases in dentin-bond strength if doubling application time of an acetone-containing one-step adhesive. Oper Dent (2007) 0.86
Changes in resin-infiltrated dentin stiffness after water storage. J Dent Res (2008) 0.86
On the mechanical behavior of scales from Cyprinus carpio. J Mech Behav Biomed Mater (2011) 0.86
Micro-tensile bond strengths to sclerotic dentin using a self-etching and a total-etching technique. Dent Mater (2002) 0.86
Interaction of glass-ionomer cements with moist dentin. J Dent Res (2004) 0.86
Effect of pulpal pressure on the microtensile bond strength of luting resin cements to human dentin. Dent Mater (2008) 0.85
Biomimetic analogs for collagen biomineralization. J Dent Res (2010) 0.84
Interaction of resin-modified glass-ionomer cements with moist dentine. J Dent (2004) 0.84
Over-etching effects on micro-tensile bond strength and failure patterns for two dentin bonding systems. J Dent (2002) 0.84
Comparison of pulse activation vs conventional light-curing on marginal adaptation of a compomer conditioned using a total-etch or a self-etch technique. Dent Mater (2002) 0.84
Carbodiimide inactivation of MMPs and effect on dentin bonding. J Dent Res (2013) 0.83
Tensile strength of mineralized/demineralized human normal and carious dentin. J Dent Res (2005) 0.83
Electric-current-assisted application of self-etch adhesives to dentin. J Dent Res (2006) 0.82
In vitro remineralization of severely compromised bonded dentin. J Dent Res (2010) 0.82
Hydrolysis of functional monomers in a single-bottle self-etching primer--correlation of 13C NMR and TEM findings. J Dent Res (2006) 0.82
Failure of a glass ionomer to remineralize apatite-depleted dentin. J Dent Res (2010) 0.82
Chlorhexidine release and antibacterial properties of chlorhexidine-incorporated polymethyl methacrylate-based resin cement. J Biomed Mater Res B Appl Biomater (2010) 0.82
Effect of temperature on water sorption and solubility of dental adhesive resins. J Dent (2008) 0.82
An all-in-one adhesive does not etch beyond hybrid layers. J Dent Res (2010) 0.80
The effect of ultrasonic removal of various root-end filling materials. Int Endod J (2009) 0.79
Effect of saliva contamination on bond strength of resin luting cements to dentin. J Dent (2009) 0.78
Quality of the interface of primary tooth dentin bonded with antibacterial fluoride-releasing adhesive. J Dent (2010) 0.78
Effect of load cycling and in vitro degradation on resin-dentin bonds using a self-etching primer. J Biomed Mater Res A (2005) 0.77
Optimizing filler content in an adhesive system containing pre-reacted glass-ionomer fillers. Dent Mater (2003) 0.77
The effect of fluoridated and non-fluoridated rewetting agents on in vitro recurrent caries. J Dent (2001) 0.77
Hardness, elasticity and ultrastructure of primary tooth dentin bonded with a self-reinforcing one-step self-etch adhesive. J Dent (2009) 0.76
Retention of fiber posts cemented at different time intervals in canals obturated using an epoxy resin sealer. J Dent (2008) 0.75
Clinical evaluation of polypropylene glycol-based caries detecting dyes for primary and permanent carious dentin. J Dent (2008) 0.75