Published in J Dent Res on August 01, 2003
Effects of resin hydrophilicity on dentin bond strength. J Dent Res (2006) 1.45
Durability of resin-dentin bonds to water- vs. ethanol-saturated dentin. J Dent Res (2009) 1.26
Chlorhexidine binding to mineralized versus demineralized dentin powder. Dent Mater (2010) 1.17
Effects of ethanol addition on the water sorption/solubility and percent conversion of comonomers in model dental adhesives. Dent Mater (2009) 1.08
Two-photon laser confocal microscopy of micropermeability of resin-dentin bonds made with water or ethanol wet bonding. J Biomed Mater Res B Appl Biomater (2009) 1.06
Factors affecting the bond strength of self-etch adhesives: A meta-analysis of literature. J Conserv Dent (2011) 1.04
Resin-dentin bonds to EDTA-treated vs. acid-etched dentin using ethanol wet-bonding. Dent Mater (2010) 0.95
Comparative evaluation of bond strength of three contemporary self-etch adhesives: An ex vivo study. Contemp Clin Dent (2011) 0.94
Adhesion to chondroitinase ABC treated dentin. J Biomed Mater Res B Appl Biomater (2008) 0.93
Effect of air-drying on the solvent evaporation, degree of conversion and water sorption/solubility of dental adhesive models. J Mater Sci Mater Med (2011) 0.89
Permeability of Dental Adhesives - A SEM Assessment. Eur J Dent (2010) 0.85
Effects of polar solvents and adhesive resin on the denaturation temperatures of demineralised dentine matrices. J Dent (2007) 0.82
Solvent type influences bond strength to air or blot-dried dentin. BMC Oral Health (2016) 0.78
Can 1% chlorhexidine diacetate and ethanol stabilize resin-dentin bonds? Dent Mater (2014) 0.77
Apparent interfacial fracture toughness of resin/ceramic systems. J Dent Res (2006) 0.77
Resin composites: strength of the bond to dentin versus mechanical properties. Clin Oral Investig (2006) 0.76
Effect of Casein Phosphopeptide-amorphous Calcium Phosphate Treatment on Microtensile Bond Strength to Carious Affected Dentin Using Two Adhesive Strategies. J Dent Res Dent Clin Dent Prospects (2014) 0.75
A review of ethanol wet-bonding: Principles and techniques. Eur J Dent (2016) 0.75
Interfacial integrity of bonded restorations with self-etching adhesives: Water storage and thermo-mechanical cycling. Eur J Dent (2012) 0.75
The effect of washing water temperature on resin-dentin micro-shear bond strength. Dent Res J (Isfahan) (2016) 0.75
Collagen degradation by host-derived enzymes during aging. J Dent Res (2004) 3.30
Chlorhexidine arrests subclinical degradation of dentin hybrid layers in vivo. J Dent Res (2005) 2.60
Tooth bleaching increases dentinal protease activity. J Dent Res (2012) 2.09
Relationship between surface area for adhesion and tensile bond strength--evaluation of a micro-tensile bond test. Dent Mater (1994) 2.03
Limitations in bonding to dentin and experimental strategies to prevent bond degradation. J Dent Res (2011) 1.92
Zymographic analysis and characterization of MMP-2 and -9 forms in human sound dentin. J Dent Res (2007) 1.88
Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent Mater (2001) 1.84
Characterization of dentin and enamel by use of optical coherence tomography. Appl Opt (1999) 1.77
Chlorhexidine preserves dentin bond in vitro. J Dent Res (2007) 1.76
Bonding to Er-YAG-laser-treated dentin. J Dent Res (2002) 1.74
Two modes of nanoleakage expression in single-step adhesives. J Dent Res (2002) 1.71
Reversal of compromised bonding to oxidized etched dentin. J Dent Res (2001) 1.65
Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res (1999) 1.58
Reversal of compromised bonding in bleached enamel. J Dent Res (2002) 1.58
Current concepts on adhesion to dentin. Crit Rev Oral Biol Med (1997) 1.58
Nanoleakage: leakage within the hybrid layer. Oper Dent (1996) 1.55
Effect of resin hydrophilicity and water storage on resin strength. Biomaterials (2004) 1.53
Ultrastructural correlates of in vivo/in vitro bond degradation in self-etch adhesives. J Dent Res (2005) 1.50
Effects of HEMA on water evaporation from water-HEMA mixtures. Dent Mater (1998) 1.50
Aggressiveness of contemporary self-etching adhesives. Part II: etching effects on unground enamel. Dent Mater (2001) 1.50
Effects of resin hydrophilicity on dentin bond strength. J Dent Res (2006) 1.45
A review of polymerization contraction: the influence of stress development versus stress relief. Oper Dent (1997) 1.44
Bonding BisGMA to dentin--a proof of concept for hydrophobic dentin bonding. J Dent Res (2007) 1.43
Regional measurement of resin-dentin bonding as an array. J Dent Res (1999) 1.37
Effects of sodium hypochlorite and RC-prep on bond strengths of resin cement to endodontic surfaces. J Endod (2001) 1.34
The inhibitory effects of quaternary ammonium methacrylates on soluble and matrix-bound MMPs. J Dent Res (2011) 1.33
In vivo chlorhexidine stabilization of hybrid layers of an acetone-based dentin adhesive. Oper Dent (2009) 1.32
Cysteine cathepsins in human carious dentin. J Dent Res (2011) 1.32
Shear bond strengths to dentin: effects of surface treatments, depth and position. Dent Mater (1988) 1.32
Cytotoxic effects of NaOCl on vital tissue. J Endod (1985) 1.31
Fluoride uptake by Streptococcus mutans 6715. Infect Immun (1977) 1.31
Tensile properties of mineralized and demineralized human and bovine dentin. J Dent Res (1994) 1.31
Effect of water content on the physical properties of model dentine primer and bonding resins. J Dent (1999) 1.28
Durability of resin-dentin bonds to water- vs. ethanol-saturated dentin. J Dent Res (2009) 1.26
Tensile bond strength and SEM evaluation of caries-affected dentin using dentin adhesives. J Dent Res (1995) 1.26
Solvent-induced dimensional changes in EDTA-demineralized dentin matrix. J Biomed Mater Res (2001) 1.25
Bonding to ground dentin by a phenyl-P self-etching primer. J Dent Res (1994) 1.25
Fluid movement across the resin-dentin interface during and after bonding. J Dent Res (2004) 1.24
In vivo and in vitro permeability of one-step self-etch adhesives. J Dent Res (2004) 1.23
Dentin permeability, dentin sensitivity, and treatment through tubule occlusion. J Endod (1986) 1.22
Ethanol wet-bonding challenges current anti-degradation strategy. J Dent Res (2010) 1.22
Mechanical properties of tannic-acid-treated dentin matrix. J Dent Res (2009) 1.22
Smear layer: physiological considerations. Oper Dent Suppl (1984) 1.22
Bonding of self-etch and total-etch adhesives to carious dentin. J Dent Res (2002) 1.20
Distribution of nanofillers from a simplified-step adhesive in acid-conditioned dentin. J Adhes Dent (1999) 1.19
Biomimetic remineralization of resin-bonded acid-etched dentin. J Dent Res (2009) 1.17
A quantitative evaluation of apical leakage of four root-canal sealers. Int Endod J (2002) 1.13
The effects of acetone, ethanol, HEMA, and air on the stiffness of human decalcified dentin matrix. J Dent Res (1996) 1.13
Carbodiimide cross-linking inactivates soluble and matrix-bound MMPs, in vitro. J Dent Res (2011) 1.12
Incompatibility of self-etch adhesives with chemical/dual-cured composites: two-step vs one-step systems. Oper Dent (2003) 1.12
Resin-dentin interfacial ultrastructure and microtensile dentin bond strength after five-year water storage. Oper Dent (2005) 1.12
Discovering new treatments for sensitive teeth: the long path from biology to therapy. J Oral Rehabil (2008) 1.11
Periodontal ligament injection: evaluation of systemic effects. Oral Surg Oral Med Oral Pathol (1983) 1.11
Urban air pollution and chronic obstructive pulmonary disease-related emergency department visits. J Epidemiol Community Health (2009) 1.11
The adhesion between fibre posts and composite resin cores: the evaluation of microtensile bond strength following various surface chemical treatments to posts. Int Endod J (2006) 1.11
Effects of dentin depth and cavity configuration on bond strength. J Dent Res (1999) 1.11
Aging affects two modes of nanoleakage expression in bonded dentin. J Dent Res (2003) 1.10
Chlorhexidine inhibits the activity of dental cysteine cathepsins. J Dent Res (2012) 1.09
Comparison of conventional vs self-etching adhesive bonds to caries-affected dentin. Oper Dent (2001) 1.09
Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites. Dent Mater (2001) 1.09
Durability of resin-dentin bonds. J Adhes Dent (1999) 1.09
Effect of UVA-activated riboflavin on dentin bonding. J Dent Res (2011) 1.08
Effect of chlorhexidine incorporation into a self-etching primer on dentine bond strength of a luting cement. J Dent (2010) 1.08
Microleakage measurement of selected restorative materials: a new in vitro method. J Prosthet Dent (1986) 1.08
Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine. J Dent (2004) 1.07
Single-bottle adhesives behave as permeable membranes after polymerization. I. In vivo evidence. J Dent (2004) 1.07
Microleakage of endodontically treated teeth restored with posts. J Endod (1998) 1.06
Dentin permeability: effects of smear layer removal. J Prosthet Dent (1981) 1.06
Comparative SEM and TEM observations of nanoleakage within the hybrid layer. Oper Dent (1996) 1.06
The effect of dentin depth on the permeability and ultrastructure of primary molars. Pediatr Dent (1994) 1.05
Effect of dentin desensitizers and cementing agents on retention of full crowns using standardized crown preparations. J Prosthet Dent (2000) 1.05
Chlorhexidine release and water sorption characteristics of chlorhexidine-incorporated hydrophobic/hydrophilic resins. Dent Mater (2008) 1.05
The use of oxalate to reduce dentin permeability under adhesive restorations. Am J Dent (2001) 1.05
Sealing properties of two contemporary single-cone obturation systems. Int Endod J (2007) 1.04
Correlation among dentin depth, permeability, and bond strength of adhesive resins. Dent Mater (1990) 1.03
In vitro effect of nanoleakage expression on resin-dentin bond strengths analyzed by microtensile bond test, SEM/EDX and TEM. Biomaterials (2004) 1.03