Published in Crit Rev Oral Biol Med on January 01, 1997
Probing the origins and control of shrinkage stress in dental resin-composites: I. Shrinkage stress characterization technique. J Mater Sci Mater Med (2004) 2.76
Adhesive/Dentin interface: the weak link in the composite restoration. Ann Biomed Eng (2010) 1.96
Nanophase separation of polymers exposed to simulated bonding conditions. J Biomed Mater Res B Appl Biomater (2009) 1.56
Effect of coinitiator and water on the photoreactivity and photopolymerization of HEMA/camphoquinone-based reactant mixtures. J Biomed Mater Res A (2006) 1.30
Enzymatic biodegradation of HEMA/bisGMA adhesives formulated with different water content. J Biomed Mater Res B Appl Biomater (2009) 1.15
Parametric study of the effect of phase anisotropy on the micromechanical behaviour of dentin-adhesive interfaces. J R Soc Interface (2005) 1.10
Effects of a solubility enhancer on penetration of hydrophobic component in model adhesives into wet demineralized dentin. Dent Mater (2007) 1.06
Chlorhexidine release and water sorption characteristics of chlorhexidine-incorporated hydrophobic/hydrophilic resins. Dent Mater (2008) 1.05
Dentin surface treatment using a non-thermal argon plasma brush for interfacial bonding improvement in composite restoration. Eur J Oral Sci (2010) 1.04
Tensile bond strength of indirect composites luted with three new self-adhesive resin cements to dentin. J Appl Oral Sci (2011) 0.95
Mechanical and leakage behaviour of the dentin--adhesive interface. J Mater Sci Mater Med (2004) 0.93
Swelling equilibrium of dentin adhesive polymers formed on the water-adhesive phase boundary: experiments and micromechanical model. Acta Biomater (2013) 0.88
Durable bonds at the adhesive/dentin interface: an impossible mission or simply a moving target? Braz Dent Sci (2012) 0.86
Factors affecting in vitro bond strength of bonding agents to human dentin. Odontology (2003) 0.84
Influence of microleakage, surface roughness and biofilm control on secondary caries formation around composite resin restorations: an in situ evaluation. J Appl Oral Sci (2009) 0.83
Analysis of interfacial structure and bond strength of self-etch adhesives. Am J Dent (2013) 0.83
Bond strength of adhesives to dentin contaminated with smoker's saliva. Odontology (2010) 0.82
Influence of hydrophobic layer and delayed placement of composite on the marginal adaptation of two self-etch adhesives. J Conserv Dent (2009) 0.81
Shear bond strength and ultrastructural interface analysis of different adhesive systems to Er:YAG laser-prepared dentin. Lasers Med Sci (2013) 0.81
In vitro enzymatic biodegradation of adhesive resin in the hybrid layer. J Biomed Mater Res A (2010) 0.81
Does the use of a novel self-adhesive flowable composite reduce nanoleakage? Clin Cosmet Investig Dent (2015) 0.81
Microleakage and scanning electron microscopy evaluation of all-in-one self-etch adhesives and their respective nanocomposites prepared by erbium:yttrium-aluminum-garnet laser and bur. Lasers Med Sci (2009) 0.81
Nanoleakage of Class V Resin Restorations Using Two Nanofilled Adhesive Systems. J Int Oral Health (2015) 0.80
Effect of three radicular dentine treatments and two luting cements on the regional bond strength of quartz fibre posts. Clin Oral Investig (2010) 0.78
In vitro microtensile bond strength of four adhesives tested at the gingival and pulpal walls of Class II restorations. J Am Dent Assoc (2006) 0.78
Effect of mucoprotein on the bond strength of resin composite to human dentin. Odontology (2011) 0.77
The effect of cavity shape and hybrid layer on the stress distribution of cervical composite restorations. Eur J Dent (2011) 0.77
Non-thermal atmospheric plasmas in dental restoration: improved resin adhesive penetration. J Dent (2014) 0.77
Characterization of interfacial chemistry of adhesive/dentin bond using FTIR chemical imaging with univariate and multivariate data processing. J Biomed Mater Res A (2009) 0.77
Degradation in the fatigue strength of dentin by cutting, etching and adhesive bonding. Dent Mater (2014) 0.76
The effect of repeated bonding on the shear bond strength of different resin cements to enamel and dentin. J Adv Prosthodont (2017) 0.75
Evaluation of Shear Bond Strength of Feldspathic CAD/CAM Ceramic with Dentin using 2 Bonding Agents and 2 Surface Treatments- An Invitro Study. J Clin Diagn Res (2015) 0.75
Effect of rotary cutting instruments on the resin-tooth interfacial ultra structure: An in vivo study. J Clin Exp Dent (2014) 0.75
Evaluation of the Shear Bond Strength of Composite Resin to Wet and Dry Enamel Using Dentin Bonding Agents Containing Various Solvents. J Clin Diagn Res (2017) 0.75
The Effect of Increased Temperatures of QMix and EDTA on the Push-out Bond Strength of an Epoxy-resin Based Sealer. J Clin Diagn Res (2015) 0.75
Evaluation of effect of three different dental unit waterline antimicrobials on the shear bond strength to dentin - An ex vivo study. J Conserv Dent (2012) 0.75
Marginal microleakage of cervical composite resin restorations bonded using etch-and-rinse and self-etch adhesives: two dimensional vs. three dimensional methods. Restor Dent Endod (2016) 0.75
Interfacial integrity of bonded restorations with self-etching adhesives: Water storage and thermo-mechanical cycling. Eur J Dent (2012) 0.75
Two-year clinical performance of a two-step etch-and-rinse adhesive in non-carious cervical lesions : Influence of subject's age and dentin etching time. Clin Oral Investig (2015) 0.75
Wettability of dentin after Yb:KYW thin-disk femtosecond ablation. Lasers Med Sci (2014) 0.75
Rearrangement of nitrogen fixation genes during heterocyst differentiation in the cyanobacterium Anabaena. Nature (1985) 4.43
Chlorhexidine arrests subclinical degradation of dentin hybrid layers in vivo. J Dent Res (2005) 2.60
Incidence of white spot formation after bonding and banding. Am J Orthod (1982) 2.35
Tooth bleaching increases dentinal protease activity. J Dent Res (2012) 2.09
Relationship between surface area for adhesion and tensile bond strength--evaluation of a micro-tensile bond test. Dent Mater (1994) 2.03
Limitations in bonding to dentin and experimental strategies to prevent bond degradation. J Dent Res (2011) 1.92
Zymographic analysis and characterization of MMP-2 and -9 forms in human sound dentin. J Dent Res (2007) 1.88
Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent Mater (2001) 1.84
Characterization of dentin and enamel by use of optical coherence tomography. Appl Opt (1999) 1.77
Chlorhexidine preserves dentin bond in vitro. J Dent Res (2007) 1.76
Two modes of nanoleakage expression in single-step adhesives. J Dent Res (2002) 1.71
Reversal of compromised bonding to oxidized etched dentin. J Dent Res (2001) 1.65
Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res (1999) 1.58
Reversal of compromised bonding in bleached enamel. J Dent Res (2002) 1.58
Nanoleakage: leakage within the hybrid layer. Oper Dent (1996) 1.55
Effect of resin hydrophilicity and water storage on resin strength. Biomaterials (2004) 1.53
Ultrastructural correlates of in vivo/in vitro bond degradation in self-etch adhesives. J Dent Res (2005) 1.50
Effects of HEMA on water evaporation from water-HEMA mixtures. Dent Mater (1998) 1.50
Effects of resin hydrophilicity on dentin bond strength. J Dent Res (2006) 1.45
A review of polymerization contraction: the influence of stress development versus stress relief. Oper Dent (1997) 1.44
Bonding BisGMA to dentin--a proof of concept for hydrophobic dentin bonding. J Dent Res (2007) 1.43
Reducing white spot lesions in orthodontic populations with fluoride rinsing. Am J Orthod Dentofacial Orthop (1992) 1.39
Molecular diversity at the self-incompatibility locus is a salient feature in natural populations of wild tomato (Lycopersicon peruvianum). Mol Gen Genet (1993) 1.39
Organization and transcription of genes important in Anabaena heterocyst differentiation. Ann Microbiol (Paris) (1983) 1.38
Regional measurement of resin-dentin bonding as an array. J Dent Res (1999) 1.37
Effects of sodium hypochlorite and RC-prep on bond strengths of resin cement to endodontic surfaces. J Endod (2001) 1.34
The inhibitory effects of quaternary ammonium methacrylates on soluble and matrix-bound MMPs. J Dent Res (2011) 1.33
In vivo chlorhexidine stabilization of hybrid layers of an acetone-based dentin adhesive. Oper Dent (2009) 1.32
Cysteine cathepsins in human carious dentin. J Dent Res (2011) 1.32
Pulmonary artery conduits in infants younger than six months of age. J Thorac Cardiovasc Surg (1976) 1.32
Shear bond strengths to dentin: effects of surface treatments, depth and position. Dent Mater (1988) 1.32
Cytotoxic effects of NaOCl on vital tissue. J Endod (1985) 1.31
Fluoride uptake by Streptococcus mutans 6715. Infect Immun (1977) 1.31
Tensile properties of mineralized and demineralized human and bovine dentin. J Dent Res (1994) 1.31
Effect of water content on the physical properties of model dentine primer and bonding resins. J Dent (1999) 1.28
What causes inefficient transmission of male-killing Wolbachia in Drosophila? Heredity (Edinb) (2001) 1.27
Durability of resin-dentin bonds to water- vs. ethanol-saturated dentin. J Dent Res (2009) 1.26
Tensile bond strength and SEM evaluation of caries-affected dentin using dentin adhesives. J Dent Res (1995) 1.26
Bonding to ground dentin by a phenyl-P self-etching primer. J Dent Res (1994) 1.25
A TEM study of two water-based adhesive systems bonded to dry and wet dentin. J Dent Res (1998) 1.25
Fluid movement across the resin-dentin interface during and after bonding. J Dent Res (2004) 1.24
In vivo and in vitro permeability of one-step self-etch adhesives. J Dent Res (2004) 1.23
Dentin permeability, dentin sensitivity, and treatment through tubule occlusion. J Endod (1986) 1.22
Ethanol wet-bonding challenges current anti-degradation strategy. J Dent Res (2010) 1.22
Mechanical properties of tannic-acid-treated dentin matrix. J Dent Res (2009) 1.22
Smear layer: physiological considerations. Oper Dent Suppl (1984) 1.22
Effects of HEMA/solvent combinations on bond strength to dentin. J Dent Res (2003) 1.21
Bonding of self-etch and total-etch adhesives to carious dentin. J Dent Res (2002) 1.20
Distribution of nanofillers from a simplified-step adhesive in acid-conditioned dentin. J Adhes Dent (1999) 1.19
The overwet phenomenon: an optical, micromorphological study of surface moisture in the acid-conditioned, resin-dentin interface. Am J Dent (1996) 1.17
Biomimetic remineralization of resin-bonded acid-etched dentin. J Dent Res (2009) 1.17
Feeding preterm infants after hospital discharge: effect of dietary manipulation on nutrient intake and growth. Pediatr Res (1998) 1.14
A quantitative evaluation of apical leakage of four root-canal sealers. Int Endod J (2002) 1.13
The effects of acetone, ethanol, HEMA, and air on the stiffness of human decalcified dentin matrix. J Dent Res (1996) 1.13
Carbodiimide cross-linking inactivates soluble and matrix-bound MMPs, in vitro. J Dent Res (2011) 1.12
Incompatibility of self-etch adhesives with chemical/dual-cured composites: two-step vs one-step systems. Oper Dent (2003) 1.12
Resin-dentin interfacial ultrastructure and microtensile dentin bond strength after five-year water storage. Oper Dent (2005) 1.12
Discovering new treatments for sensitive teeth: the long path from biology to therapy. J Oral Rehabil (2008) 1.11
Periodontal ligament injection: evaluation of systemic effects. Oral Surg Oral Med Oral Pathol (1983) 1.11
Effects of dentin depth and cavity configuration on bond strength. J Dent Res (1999) 1.11
The overwet phenomenon: a transmission electron microscopic study of surface moisture in the acid-conditioned, resin-dentin interface. Am J Dent (1996) 1.10
Aging affects two modes of nanoleakage expression in bonded dentin. J Dent Res (2003) 1.10
Chlorhexidine inhibits the activity of dental cysteine cathepsins. J Dent Res (2012) 1.09
Comparison of conventional vs self-etching adhesive bonds to caries-affected dentin. Oper Dent (2001) 1.09
Durability of resin-dentin bonds. J Adhes Dent (1999) 1.09
Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites. Dent Mater (2001) 1.09
Effect of UVA-activated riboflavin on dentin bonding. J Dent Res (2011) 1.08
Microleakage measurement of selected restorative materials: a new in vitro method. J Prosthet Dent (1986) 1.08
'Time critical' rapid amputation using fire service hydraulic cutting equipment. Injury (2011) 1.07
Single-bottle adhesives behave as permeable membranes after polymerization. I. In vivo evidence. J Dent (2004) 1.07
Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine. J Dent (2004) 1.07
Plaque distribution on bonded brackets: a scanning microscope study. Am J Orthod (1979) 1.07
Microleakage of endodontically treated teeth restored with posts. J Endod (1998) 1.06
Dentin permeability: effects of smear layer removal. J Prosthet Dent (1981) 1.06
Comparative SEM and TEM observations of nanoleakage within the hybrid layer. Oper Dent (1996) 1.06
The effect of dentin depth on the permeability and ultrastructure of primary molars. Pediatr Dent (1994) 1.05
Effect of dentin desensitizers and cementing agents on retention of full crowns using standardized crown preparations. J Prosthet Dent (2000) 1.05
Chlorhexidine release and water sorption characteristics of chlorhexidine-incorporated hydrophobic/hydrophilic resins. Dent Mater (2008) 1.05
Sealing properties of two contemporary single-cone obturation systems. Int Endod J (2007) 1.04
Correlation among dentin depth, permeability, and bond strength of adhesive resins. Dent Mater (1990) 1.03
In vitro effect of nanoleakage expression on resin-dentin bond strengths analyzed by microtensile bond test, SEM/EDX and TEM. Biomaterials (2004) 1.03
Dislocation resistance of ProRoot Endo Sealer, a calcium silicate-based root canal sealer, from radicular dentine. Int Endod J (2009) 1.02
The dentinal surface: its influence on dentinal adhesion. Part III. Quintessence Int (1993) 1.02
Microscopic evaluation of enamel after debonding: clinical application. Am J Orthod (1977) 1.02
The effects of desensitizing agents on the hydraulic conductance of human dentin in vitro. J Dent Res (1981) 1.02
Cytotoxicity of dental composites and other materials in a new in vitro device. J Oral Pathol (1988) 1.01
Dentin permeability. Effects of desensitizing dentifrices in vitro. J Periodontol (1984) 1.01
Bond strengths of single-bottle dentin adhesives to caries-affected dentin. Oper Dent (2001) 1.01
Smear layer: morphological considerations. Oper Dent Suppl (1984) 1.00
Variability in microleakage observed in a total-etch wet-bonding technique under different handling conditions. J Dent Res (1995) 1.00
Penetration of resin dental materials into enamel surfaces with reference to bonding. Arch Oral Biol (1968) 1.00
Effects of 15 vs 60 second enamel acid conditioning on adhesion and morphology. Oper Dent (1986) 1.00
The effects of oxalate treatment on the smear layer of ground surfaces of human dentine. Arch Oral Biol (1985) 1.00
Effect of removal of surface collagen fibrils on resin-dentin bonding. Dent Mater (1999) 1.00
A scanning electron microscopic study of teeth following periodontal instrumentation. J Periodontol (1977) 1.00
Resin-infiltrated dentin layer formation of new bonding systems. Oper Dent (1998) 1.00
An ultrastructural study of the influence of acidity of self-etching primers and smear layer thickness on bonding to intact dentin. J Adhes Dent (2000) 0.99
Resin permeation into acid-conditioned, moist, and dry dentin: a paradigm using water-free adhesive primers. J Dent Res (1996) 0.99
Effect of phosphoric acid on the degradation of human dentin matrix. J Dent Res (2012) 0.99
Effect of smear layers on the bonding of a self-etching primer to dentin. J Adhes Dent (2000) 0.99