Published in J Dent Res on February 01, 2005
Selective Enamel Etching in Self-etching Adhesives: a 2-year Clinical Trial | NCT02419157
State of the art etch-and-rinse adhesives. Dent Mater (2010) 2.41
Adhesive/Dentin interface: the weak link in the composite restoration. Ann Biomed Eng (2010) 1.96
Chlorhexidine preserves dentin bond in vitro. J Dent Res (2007) 1.76
Treatment of deep carious lesions by complete excavation or partial removal: a critical review. J Am Dent Assoc (2008) 1.71
In vitro and in vivo studies on the toxicity of dental resin components: a review. Clin Oral Investig (2007) 1.57
Nanophase separation of polymers exposed to simulated bonding conditions. J Biomed Mater Res B Appl Biomater (2009) 1.56
Chlorhexidine stabilizes the adhesive interface: a 2-year in vitro study. Dent Mater (2009) 1.55
Effects of resin hydrophilicity on dentin bond strength. J Dent Res (2006) 1.45
Preparation and Properties of Novel Dentin Adhesives with Esterase Resistance. J Appl Polym Sci Symp (2007) 1.29
Use of a specific MMP-inhibitor (galardin) for preservation of hybrid layer. Dent Mater (2010) 1.27
Synthesis and characterization of antibacterial dental monomers and composites. J Biomed Mater Res B Appl Biomater (2012) 1.23
Grape seed proanthocyanidins increase collagen biodegradation resistance in the dentin/adhesive interface when included in an adhesive. J Dent (2010) 1.18
Biomimetic remineralization of resin-bonded acid-etched dentin. J Dent Res (2009) 1.17
Influence of chlorhexidine concentration on the durability of etch-and-rinse dentin bonds: a 12-month in vitro study. J Adhes Dent (2009) 1.16
Enzymatic biodegradation of HEMA/bisGMA adhesives formulated with different water content. J Biomed Mater Res B Appl Biomater (2009) 1.15
Enzyme-catalyzed hydrolysis of dentin adhesives containing a new urethane-based trimethacrylate monomer. J Biomed Mater Res B Appl Biomater (2009) 1.14
Molecular toxicology of substances released from resin-based dental restorative materials. Int J Mol Sci (2009) 1.11
Effect of water-ageing on dentine bond strength and anti-biofilm activity of bonding agent containing new monomer dimethylaminododecyl methacrylate. J Dent (2013) 1.11
Effect of different bonding strategies on adhesion to deep and superficial permanent dentin. Eur J Dent (2010) 1.05
Adhesive systems: important aspects related to their composition and clinical use. J Appl Oral Sci (2010) 1.04
To compare the microleakage among experimental adhesives containing nanoclay fillers after the storages of 24 hours and 6 months. Open Dent J (2011) 1.00
Cytotoxicity of dental adhesives in vitro. Eur J Dent (2009) 0.99
Effect of acid etching of glass ionomer cement surface on the microleakage of sandwich restorations. J Appl Oral Sci (2007) 0.99
Two-year clinical performance of glass ionomer and resin composite restorations in xerostomic head- and neck-irradiated cancer patients. Clin Oral Investig (2009) 0.98
Clinical effectiveness of contemporary dentin bonding agents. J Conserv Dent (2010) 0.97
Microleakage of silorane- and methacrylate-based class V composite restorations. Clin Oral Investig (2011) 0.97
Enhancement in dentin collagen's biological stability after proanthocyanidins treatment in clinically relevant time periods. Dent Mater (2013) 0.97
A 13-year clinical evaluation of two three-step etch-and-rinse adhesives in non-carious class-V lesions. Clin Oral Investig (2010) 0.97
Fatigue of dentin-composite interfaces with four-point bend. Dent Mater (2007) 0.96
Influence of Diamond Sono-Abrasion, Air-Abrasion and Er:YAG Laser Irradiation on Bonding of Different Adhesive Systems to Dentin. Eur J Dent (2007) 0.93
Adhesion to chondroitinase ABC treated dentin. J Biomed Mater Res B Appl Biomater (2008) 0.93
Influence of blood contamination on bond strength of a self-etching system. Eur J Dent (2010) 0.93
Effect of proanthocyanidins and photo-initiators on photo-polymerization of a dental adhesive. J Dent (2012) 0.92
Bond strength durability of self-etching adhesives and resin cements to dentin. J Appl Oral Sci (2009) 0.91
Bonding and sealing ability of a new self-adhering flowable composite resin in class I restorations. Clin Oral Investig (2012) 0.91
Proanthocyanidins alter adhesive/dentin bonding strengths when included in a bonding system. Am J Dent (2012) 0.90
Biologically based restorative management of tooth wear. Int J Dent (2012) 0.90
Time-dependent effect of refrigeration on viscosity and conversion kinetics of dental adhesive resins. Eur J Dent (2010) 0.90
Shear bond strength of metallic brackets: influence of saliva contamination. J Appl Oral Sci (2009) 0.87
A comparative evaluation of the bonding efficacy of two-step vs all-in-one bonding agents - An in-vitro study. J Conserv Dent (2009) 0.87
Bond durability in erbium:yttrium-aluminum-garnet laser-irradiated enamel. Lasers Med Sci (2008) 0.86
Durable bonds at the adhesive/dentin interface: an impossible mission or simply a moving target? Braz Dent Sci (2012) 0.86
Dentin bond strength after ablation using a CO(2) laser operating at high pulse repetition rates. Proc SPIE Int Soc Opt Eng (2009) 0.86
The effects of dentin bonding agent formulas on their polymerization quality, and together with tooth tissues on their microleakage and shear bond strength: an explorative 3-step experiment. J Adv Prosthodont (2014) 0.86
Validity of bond strength tests: A critical review-Part II. J Conserv Dent (2014) 0.86
Analysis of marginal adaptation and sealing to enamel and dentin of four self-adhesive resin cements. Clin Oral Investig (2011) 0.86
Proanthocyanidins' efficacy in stabilizing dentin collagen against enzymatic degradation: MALDI-TOF and FTIR analyses. J Dent (2013) 0.85
Clinical effectiveness of a one-step self-etch adhesive in non-carious cervical lesions at 2 years. Clin Oral Investig (2011) 0.85
MMP Inhibitors on Dentin Stability: A Systematic Review and Meta-analysis. J Dent Res (2014) 0.84
Three-year randomized clinical evaluation of a low-shrinkage silorane-based resin composite in non-carious cervical lesions. Clin Oral Investig (2013) 0.84
Bond strength of resin-resin interfaces contaminated with saliva and submitted to different surface treatments. J Appl Oral Sci (2007) 0.84
The effect of the pre-conditioning step on the shear bond strength of nano-filled resin-modified glass-ionomer to dentin. Eur J Dent (2011) 0.84
Determination of neutralization capacity and stability of a basic methacrylate monomer using NMR. Int J Polym Mater (2012) 0.84
Evaluation of the mechanical properties of dental adhesives and glass-ionomer cements. Clin Oral Investig (2009) 0.83
Analysis of interfacial structure and bond strength of self-etch adhesives. Am J Dent (2013) 0.83
Postoperative sensitivity in Class V composite restorations: Comparing soft start vs. constant curing modes of LED. J Conserv Dent (2011) 0.83
Effect of a plant-based hemostatic agent on microleakage of self-etching adhesives. Med Oral Patol Oral Cir Bucal (2013) 0.83
Marginal adaptation of class V composite restorations submitted to thermal and mechanical cycling. J Appl Oral Sci (2013) 0.83
Effect of oxalic acid pre-treatment in restorations of non-carious cervical lesions: A randomized clinical trial. J Conserv Dent (2014) 0.82
A 4-year clinical evaluation of direct composite build-ups for space closure after orthodontic treatment. Clin Oral Investig (2015) 0.82
Bond strength to root dentin and fluid filtration test of AH Plus/gutta-percha, EndoREZ and RealSeal systems. J Appl Oral Sci (2013) 0.82
Bond strength and morphology of enamel using self-etching adhesive systems with different acidities. J Appl Oral Sci (2009) 0.82
Microbial biofilm proliferation within sealer-root dentin interfaces is affected by sealer type and aging period. J Endod (2012) 0.82
Validity of bond strength tests: A critical review: Part I. J Conserv Dent (2014) 0.82
Effect of multiple consecutive adhesive coatings on microleakage of class v cavities. Eur J Dent (2009) 0.82
Biomimetic remineralization of dentin. Dent Mater (2013) 0.81
Effect of cariogenic challenge on the stability of dentin bonds. J Appl Oral Sci (2014) 0.81
Nanoleakage for Self-Adhesive Resin Cements used in Bonding CAD/CAD Ceramic Material to Dentin. Eur J Dent (2011) 0.81
Anterior composite restorations in clinical practice: findings from a survey with general dental practitioners. J Appl Oral Sci (2014) 0.81
In vitro enzymatic biodegradation of adhesive resin in the hybrid layer. J Biomed Mater Res A (2010) 0.81
Thermocycling effect on microshear bond strength to zirconia ceramic using Er:YAG and tribochemical silica coating as surface conditioning. Lasers Med Sci (2013) 0.81
Marginal adaptation of an etch-and-rinse adhesive with a new type of solvent in class II cavities after artificial aging. Clin Oral Investig (2009) 0.80
Marginal sealing durability of two contemporary self-etch adhesives. ISRN Dent (2012) 0.80
Effect of Using Electric Current during Dentin Bonding Agent Application on Microleakage under Simulated Pulpal Pressure Condition. Dent Res J (Isfahan) (2010) 0.80
Long-term bonding to eroded dentin requires superficial bur preparation. Clin Oral Investig (2011) 0.80
Three-year clinical evaluation of a two-step self-etch adhesive with or without selective enamel etching in non-carious cervical sclerotic lesions. Clin Oral Investig (2013) 0.80
The outcome of immediate or delayed application of a single-step self-etch adhesive to coronal dentin following the application of different endodontic irrigants. Eur J Dent (2009) 0.80
An in vitro evaluation of effect of eugenol exposure time on the shear bond strength of two-step and one-step self-etching adhesives to dentin. J Conserv Dent (2014) 0.79
Bonding strength of silorane-based composite to Er-YAG laser prepared dentin. Lasers Med Sci (2013) 0.79
Adhesion to primary and permanent dentin and a simple model approach. Eur J Dent (2009) 0.79
Influence of two desensitizer agents on the microleakage of adhesively luted ceramic inlays. Eur J Dent (2011) 0.79
Eight-year randomized clinical evaluation of Class II nanohybrid resin composite restorations bonded with a one-step self-etch or a two-step etch-and-rinse adhesive. Clin Oral Investig (2014) 0.79
Analysis of the interfacial micromorphology and bond strength of adhesive systems to Er:YAG laser-irradiated dentin. Lasers Med Sci (2012) 0.79
Effect of EDTA and phosphoric Acid pretreatment on the bonding effectiveness of self-etch adhesives to ground enamel. Eur J Dent (2010) 0.79
Influence of different bonding agents and composite resins on fracture resistance of reattached incisal tooth fragment. J Dent (Shiraz) (2014) 0.79
Clinical longevity of ceramic laminate veneers bonded to teeth with and without existing composite restorations up to 40 months. Clin Oral Investig (2012) 0.79
24-month clinical evaluation in non-carious cervical lesions of a two-step etch-and-rinse adhesive applied using a rubbing motion. Clin Oral Investig (2010) 0.79
Design and development of self-healing dental composites. Mater Des (2016) 0.79
Shear bond strength of one-step self-etch adhesives: pH influence. Dent Res J (Isfahan) (2015) 0.78
Morphological effects of MMPs inhibitors on the dentin bonding. Int J Clin Exp Med (2015) 0.78
A three-dimensional evaluation of microleakage of class V cavities prepared by the very short pulse mode of the erbium:yttrium-aluminium-garnet laser. Lasers Med Sci (2009) 0.78
Noninvasive and multidisciplinary approach to the functional and esthetic rehabilitation of amelogenesis imperfecta: a pediatric case report. Case Rep Dent (2014) 0.78
Dentin infiltration ability of different classes of adhesive systems. Clin Oral Investig (2012) 0.78
Effect of operator variability on microleakage with different adhesive systems. Eur J Dent (2013) 0.78
Bond Strength of One-Step Adhesives under Different Substrate Moisture Conditions. Eur J Dent (2009) 0.78
Shear bond strength of one-step self-etch adhesives with different co-solvent ingredients to dry or moist dentin. Saudi Dent J (2010) 0.78
A randomized double-blind clinical trial of posterior composite restorations with or without bevel: 1-year follow-up. J Appl Oral Sci (2012) 0.78
Marginal seal stability of one bottle adhesives in Class V vs. Class I cavities. Clin Oral Investig (2010) 0.78
Nonthermal Atmospheric Plasmas in Dental Restoration. J Dent Res (2016) 0.77
Self-etching aspects of a three-step etch-and-rinse adhesive. Clin Oral Investig (2012) 0.77
Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater (1997) 2.77
Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Mater (2005) 2.35
Comparative study on adhesive performance of functional monomers. J Dent Res (2004) 2.32
Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dent Mater (1999) 1.95
Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res (2003) 1.83
A 15-year experience with combined vascular reconstruction and free flap transfer for limb-salvage. Eur J Vasc Endovasc Surg (2009) 1.76
Porcelain veneers: a review of the literature. J Dent (2000) 1.72
Doppler flowmetry in the planning of perforator flaps. Br J Plast Surg (1998) 1.71
The donor site morbidity of free DIEP flaps and free TRAM flaps for breast reconstruction. Br J Plast Surg (1997) 1.68
Meta-analysis of bonding effectiveness to zirconia ceramics. J Dent Res (2014) 1.68
Mechanical root canal preparation with NiTi rotary instruments: rationale, performance and safety. Status report for the American Journal of Dentistry. Am J Dent (2001) 1.63
Inhibition of enzymatic degradation of adhesive-dentin interfaces. J Dent Res (2009) 1.60
Monomer-solvent phase separation in one-step self-etch adhesives. J Dent Res (2005) 1.60
Evidence of chemical bonding at biomaterial-hard tissue interfaces. J Dent Res (2000) 1.57
The clinical performance of adhesives. J Dent (1998) 1.55
Chemical characterization of the resin-dentin interface by micro-Raman spectroscopy. J Dent Res (1993) 1.54
Progressive versus constant tapered shaft design using NiTi rotary instruments. Int Endod J (2003) 1.50
Evaluation of two dentin adhesives in cervical lesions. J Prosthet Dent (1993) 1.50
Relationship between bond-strength tests and clinical outcomes. Dent Mater (2009) 1.47
Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater (2006) 1.42
Bond strength of a mild self-etch adhesive with and without prior acid-etching. J Dent (2005) 1.41
Quantitative in vivo wear of human enamel. J Dent Res (1989) 1.34
Microtensile bond strength of eleven contemporary adhesives to dentin. J Adhes Dent (2001) 1.32
Field emission SEM comparison of four postfixation drying techniques for human dentin. J Biomed Mater Res (1995) 1.32
Comparative physico-mechanical characterization of new hybrid restorative materials with conventional glass-ionomer and resin composite restorative materials. J Dent Res (1997) 1.31
Hydrolytic stability of self-etch adhesives bonded to dentin. J Dent Res (2005) 1.25
A TEM study of two water-based adhesive systems bonded to dry and wet dentin. J Dent Res (1998) 1.25
Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems. J Dent Res (1992) 1.19
Root canal treatment performed by Flemish dentists. Part 1. Cleaning and shaping. Int Endod J (2003) 1.17
The role of HEMA in one-step self-etch adhesives. Dent Mater (2008) 1.17
Chemical interaction of phosphoric acid ester with hydroxyapatite. J Dent Res (2006) 1.17
Origin of interfacial droplets with one-step adhesives. J Dent Res (2007) 1.17
Effects of a self-etching primer on enamel shear bond strengths and SEM morphology. Am J Dent (1997) 1.16
The versatility of the pudendal thigh fasciocutaneous flap used as an island flap. Plast Reconstr Surg (2001) 1.16
Current aspects on bonding effectiveness and stability in adhesive dentistry. Aust Dent J (2011) 1.15
Hardness and Young's modulus determined by nanoindentation technique of filler particles of dental restorative materials compared with human enamel. J Biomed Mater Res (1993) 1.14
Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area. J Dent Res (1993) 1.13
Meta-analytical review of parameters involved in dentin bonding. J Dent Res (2011) 1.12
Effect of photo-activated disinfection on endodontic pathogens ex vivo. Int Endod J (2007) 1.10
How much do resin-based dental materials release? A meta-analytical approach. Dent Mater (2011) 1.10
Is there one optimal repair technique for all composites? Dent Mater (2011) 1.10
Extension of a one-step self-etch adhesive into a multi-step adhesive. Dent Mater (2005) 1.08
European Society of Endodontology position statement: the use of CBCT in endodontics. Int Endod J (2014) 1.08
Clinical relevance of laboratory fatigue studies. J Dent (1994) 1.07
Cervical external root resorption in vital teeth. J Clin Periodontol (2002) 1.06
Comparative SEM and TEM examination of the ultrastructure of the resin-dentin interdiffusion zone. J Dent Res (1993) 1.05
A methodology for quantitative evaluation of root canal instrumentation using microcomputed tomography. Int Endod J (2001) 1.05
Restoring cervical lesions with flexible composites. Dent Mater (2006) 1.04
Influence of the chemical structure of functional monomers on their adhesive performance. J Dent Res (2008) 1.03
Clinical wear performance of eight experimental dental composites over three years determined by two measuring methods. Eur J Oral Sci (2001) 1.03
In vitro effect of nanoleakage expression on resin-dentin bond strengths analyzed by microtensile bond test, SEM/EDX and TEM. Biomaterials (2004) 1.03
Root resorption of the maxillary lateral incisor caused by impacted canine: a literature review. Clin Oral Investig (2009) 1.02
The interaction of adhesive systems with human dentin. Am J Dent (1996) 1.01
Buonocore memorial lecture. Evaluation of clinical performance for posterior composite resins and dentin adhesives. Oper Dent (1987) 1.01
Eight-year clinical evaluation of a 2-step self-etch adhesive with and without selective enamel etching. Dent Mater (2010) 1.01