Published in Dent Mater on March 01, 1999
Dental composites based on amorphous calcium phosphate - resin composition/physicochemical properties study. J Biomater Appl (2006) 1.76
Covalent Adaptable Networks (CANs): A Unique Paradigm in Crosslinked Polymers. Macromolecules (2010) 1.16
Covalent adaptable networks as dental restorative resins: stress relaxation by addition-fragmentation chain transfer in allyl sulfide-containing resins. Dent Mater (2010) 1.03
Effect of pre-heating composite resin on gap formation at three different temperatures. J Conserv Dent (2011) 0.98
Microleakage of silorane- and methacrylate-based class V composite restorations. Clin Oral Investig (2011) 0.97
Effect of hybrid layer and thickness on stress distribution of cervical wedge-shaped restorations. Eur J Dent (2010) 0.93
Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins. J Appl Oral Sci (2008) 0.91
Microleakage at enamel and dentin margins with a bulk fills flowable resin. Eur J Dent (2014) 0.91
Shear bond strengths and morphological evaluation of filled and unfilled adhesive interfaces to enamel and dentine. Int J Dent (2012) 0.91
Bonding and sealing ability of a new self-adhering flowable composite resin in class I restorations. Clin Oral Investig (2012) 0.91
Bioactive polymeric composites for tooth mineral regeneration: physicochemical and cellular aspects. J Funct Biomater (2011) 0.86
Effects of different light curing units/modes on the microleakage of flowable composite resins. Eur J Dent (2008) 0.85
Effect of storage time on microtensile bond strength between quartz fiber post and composite core after different post surface treatments. J Conserv Dent (2011) 0.84
Degree of vinyl conversion, polymerization shrinkage and stress development in experimental endodontic composite. J Biomim Biomater Tissue Eng (2009) 0.83
Polymerization stress development in dental composites: Effect of cavity design factor. Materials (Basel) (2009) 0.83
Stress relaxation via addition-fragmentation chain transfer in high T(g), high conversion methacrylate-based systems. Macromolecules (2012) 0.83
Amorphous Calcium Phosphate-Based Bioactive Polymeric Composites for Mineralized Tissue Regeneration. J Res Natl Inst Stand Technol (2003) 0.82
Transmission of composite polymerization contraction force through a flowable composite and a resin-modified glass ionomer cement. J Appl Oral Sci (2007) 0.81
56-month clinical performance of Class I and II resin composite restorations. J Appl Oral Sci (2012) 0.81
Comparing the shear bond strength of direct and indirect composite inlays in relation to different surface conditioning and curing techniques. Eur J Dent (2013) 0.80
One-year clinical evaluation of a flowable resin liner associated with a microhybrid resin in noncarious cervical lesions. Clin Oral Investig (2004) 0.79
RAFT-mediated control of nanogel structure and reactivity: chemical, physical and mechanical properties of monomer-dispersed nanogel compositions. Dent Mater (2014) 0.79
Flowable Resin Composites: A Systematic Review and Clinical Considerations. J Clin Diagn Res (2015) 0.78
Structure-Composition-Property Relationships in Polymeric Amorphous Calcium Phosphate-Based Dental Composites. Materials (Basel) (2009) 0.76
In vivo interfacial adaptation of class II resin composite restorations with and without a flowable resin composite liner. Clin Oral Investig (2005) 0.76
Novel dental restorative materials having low polymerization shrinkage stress via stress relaxation by addition-fragmentation chain transfer. Dent Mater (2012) 0.76
Effect of Resin Cement Pre-heating on the Push-out Bond Strength of Fiber Post to Root Canal Dentin. J Dent Res Dent Clin Dent Prospects (2015) 0.75
Effect of adhesive layers on microshear bond strength of nanocomposite resin to dentin. J Clin Exp Dent (2017) 0.75
A comparative evaluation of microleakage of restorations using silorane-based dental composite and methacrylate-based dental composites in Class II cavities: An in vitro study. J Pharm Bioallied Sci (2016) 0.75
The influence of adding modified zirconium oxide-titanium dioxide nano-particles on mechanical properties of orthodontic adhesive: an in vitro study. BMC Oral Health (2017) 0.75
Fatigue failure of dentin-composite disks subjected to cyclic diametral compression. Dent Mater (2015) 0.75
Influence of filler existence on microleakage of a self-etch adhesive system. J Conserv Dent (2014) 0.75
Shrinkage, stress, and modulus of dimethacrylate, ormocer, and silorane composites. J Conserv Dent (2015) 0.75
Inconsistency in the strength testing of dental resin-based composites among researchers. Pak J Med Sci (2013) 0.75
The effect of repeated preheating of dimethacrylate and silorane-based composite resins on marginal gap of class V restorations. J Dent Res Dent Clin Dent Prospects (2017) 0.75
EFFECTS OF FILLER, INITIATOR AND CAVITY DESIGN FACTOR ON POLYMERIZATION STRESS DEVELOPED IN DENTAL COMPOSITES. Polymer Prepr (2015) 0.75
Bulk filling of Class II cavities with a dual-cure composite: Effect of curing mode and enamel etching on marginal adaptation. J Clin Exp Dent (2014) 0.75
Properties evaluation of silorane, low-shrinkage, non-flowable and flowable resin-based composites in dentistry. PeerJ (2015) 0.75
Microshear bond strength of Nano-Bond adhesive containing nanosized aluminum trioxide particles. J Orthod Sci (2017) 0.75
Polymerization shrinkage assessment of dental resin composites: a literature review. Odontology (2016) 0.75
Microtensile Bond Strength and Failure Modes of Flowable Composites on Primary Dentin with Application of Different Adhesive Strategies. Contemp Clin Dent (2017) 0.75
Clinical performance of a nanofilled resin composite with and without an intermediary layer of flowable composite: a 2-year evaluation. Clin Oral Investig (2010) 0.75
A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res (2005) 4.79
Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater (1997) 2.77
Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Mater (2005) 2.35
Comparative study on adhesive performance of functional monomers. J Dent Res (2004) 2.32
Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res (2003) 1.83
Porcelain veneers: a review of the literature. J Dent (2000) 1.72
Meta-analysis of bonding effectiveness to zirconia ceramics. J Dent Res (2014) 1.68
Mechanical root canal preparation with NiTi rotary instruments: rationale, performance and safety. Status report for the American Journal of Dentistry. Am J Dent (2001) 1.63
Inhibition of enzymatic degradation of adhesive-dentin interfaces. J Dent Res (2009) 1.60
Monomer-solvent phase separation in one-step self-etch adhesives. J Dent Res (2005) 1.60
Evidence of chemical bonding at biomaterial-hard tissue interfaces. J Dent Res (2000) 1.57
The clinical performance of adhesives. J Dent (1998) 1.55
Chemical characterization of the resin-dentin interface by micro-Raman spectroscopy. J Dent Res (1993) 1.54
Progressive versus constant tapered shaft design using NiTi rotary instruments. Int Endod J (2003) 1.50
Evaluation of two dentin adhesives in cervical lesions. J Prosthet Dent (1993) 1.50
Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater (2006) 1.42
Bond strength of a mild self-etch adhesive with and without prior acid-etching. J Dent (2005) 1.41
Quantitative in vivo wear of human enamel. J Dent Res (1989) 1.34
Field emission SEM comparison of four postfixation drying techniques for human dentin. J Biomed Mater Res (1995) 1.32
Microtensile bond strength of eleven contemporary adhesives to dentin. J Adhes Dent (2001) 1.32
Comparative physico-mechanical characterization of new hybrid restorative materials with conventional glass-ionomer and resin composite restorative materials. J Dent Res (1997) 1.31
Hydrolytic stability of self-etch adhesives bonded to dentin. J Dent Res (2005) 1.25
A TEM study of two water-based adhesive systems bonded to dry and wet dentin. J Dent Res (1998) 1.25
Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems. J Dent Res (1992) 1.19
The role of HEMA in one-step self-etch adhesives. Dent Mater (2008) 1.17
Chemical interaction of phosphoric acid ester with hydroxyapatite. J Dent Res (2006) 1.17
Origin of interfacial droplets with one-step adhesives. J Dent Res (2007) 1.17
Effects of a self-etching primer on enamel shear bond strengths and SEM morphology. Am J Dent (1997) 1.16
Current aspects on bonding effectiveness and stability in adhesive dentistry. Aust Dent J (2011) 1.15
Hardness and Young's modulus determined by nanoindentation technique of filler particles of dental restorative materials compared with human enamel. J Biomed Mater Res (1993) 1.14
Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area. J Dent Res (1993) 1.13
Recommendations for conducting controlled clinical studies of dental restorative materials. Clin Oral Investig (2007) 1.13
Meta-analytical review of parameters involved in dentin bonding. J Dent Res (2011) 1.12
Effect of photo-activated disinfection on endodontic pathogens ex vivo. Int Endod J (2007) 1.10
How much do resin-based dental materials release? A meta-analytical approach. Dent Mater (2011) 1.10
Is there one optimal repair technique for all composites? Dent Mater (2011) 1.10
Extension of a one-step self-etch adhesive into a multi-step adhesive. Dent Mater (2005) 1.08
European Society of Endodontology position statement: the use of CBCT in endodontics. Int Endod J (2014) 1.08
Clinical relevance of laboratory fatigue studies. J Dent (1994) 1.07
Cervical external root resorption in vital teeth. J Clin Periodontol (2002) 1.06
Comparative SEM and TEM examination of the ultrastructure of the resin-dentin interdiffusion zone. J Dent Res (1993) 1.05
A methodology for quantitative evaluation of root canal instrumentation using microcomputed tomography. Int Endod J (2001) 1.05
Restoring cervical lesions with flexible composites. Dent Mater (2006) 1.04
Influence of the chemical structure of functional monomers on their adhesive performance. J Dent Res (2008) 1.03
Clinical wear performance of eight experimental dental composites over three years determined by two measuring methods. Eur J Oral Sci (2001) 1.03
In vitro effect of nanoleakage expression on resin-dentin bond strengths analyzed by microtensile bond test, SEM/EDX and TEM. Biomaterials (2004) 1.03
Root resorption of the maxillary lateral incisor caused by impacted canine: a literature review. Clin Oral Investig (2009) 1.02
The interaction of adhesive systems with human dentin. Am J Dent (1996) 1.01
Buonocore memorial lecture. Evaluation of clinical performance for posterior composite resins and dentin adhesives. Oper Dent (1987) 1.01
Eight-year clinical evaluation of a 2-step self-etch adhesive with and without selective enamel etching. Dent Mater (2010) 1.01
Smooth flexible versus active tapered shaft design using NiTi rotary instruments. Int Endod J (2002) 1.00
Void detection in root fillings using intraoral analogue, intraoral digital and cone beam CT images. Int Endod J (2009) 0.99
Bonding effectiveness and interfacial characterization of a nano-filled resin-modified glass-ionomer. Dent Mater (2009) 0.99
Bactericidal effect of Nd:YAG laser irradiation on some endodontic pathogens ex vivo. Int Endod J (2006) 0.98
Bonding of low-shrinking composites in high C-factor cavities. J Dent (2012) 0.98
Factors affecting the cement-post interface. Dent Mater (2011) 0.98
Effect of remaining dentin thickness and the use of conditioner on micro-tensile bond strength of a glass-ionomer adhesive. Dent Mater (2001) 0.97