Published in J Bone Joint Surg Am on January 01, 2004
Macroscale delivery systems for molecular and cellular payloads. Nat Mater (2013) 1.25
Tissue integration of growth factor-eluting layer-by-layer polyelectrolyte multilayer coated implants. Biomaterials (2010) 1.24
Trabecular metal tibia still stable at 5 years: an RSA study of 36 patients aged less than 60 years. Acta Orthop (2013) 0.96
Modular hybrid total hip arthroplasty. Experimental study in dogs. Acta Vet Scand (2011) 0.78
The etiology of osteoarthritis of the hip: an integrated mechanical concept. Clin Orthop Relat Res (2008) 4.63
Rates and outcomes of primary and revision total hip replacement in the United States medicare population. J Bone Joint Surg Am (2003) 4.38
Optimal low-density lipoprotein is 50 to 70 mg/dl: lower is better and physiologically normal. J Am Coll Cardiol (2004) 4.07
The epidemiology of revision total knee arthroplasty in the United States. Clin Orthop Relat Res (2009) 3.94
The 2007 ABJS Marshall Urist Award: The impact of direct-to-consumer advertising in orthopaedics. Clin Orthop Relat Res (2007) 3.34
Incidence rates of dislocation, pulmonary embolism, and deep infection during the first six months after elective total hip replacement. J Bone Joint Surg Am (2003) 3.33
Association of hospital and surgeon volume of total hip replacement with functional status and satisfaction three years following surgery. Arthritis Rheum (2003) 2.98
The epidemiology of bearing surface usage in total hip arthroplasty in the United States. J Bone Joint Surg Am (2009) 2.28
Use of cost-effectiveness analysis to evaluate new technologies in orthopaedics. The case of alternative bearing surfaces in total hip arthroplasty. J Bone Joint Surg Am (2006) 2.07
Orthopaedic procedure volume and patient outcomes: a systematic literature review. Clin Orthop Relat Res (2007) 1.96
Range of motion and stability in total hip arthroplasty with 28-, 32-, 38-, and 44-mm femoral head sizes. J Arthroplasty (2005) 1.85
Osteoblast proliferation and maturation by bisphosphonates. Biomaterials (2004) 1.81
The John Charnley Award: risk factors for cup malpositioning: quality improvement through a joint registry at a tertiary hospital. Clin Orthop Relat Res (2011) 1.77
Highly cross-linked polyethylene: the debate is over--in the affirmative. J Arthroplasty (2005) 1.76
Surgeon fatigue: a prospective analysis of the incidence, risk, and intervals of predicted fatigue-related impairment in residents. Arch Surg (2012) 1.72
Dislocation after total hip arthroplasty. J Am Acad Orthop Surg (2004) 1.69
In vivo articular cartilage contact kinematics of the knee: an investigation using dual-orthogonal fluoroscopy and magnetic resonance image-based computer models. Am J Sports Med (2005) 1.66
In vivo tibiofemoral contact analysis using 3D MRI-based knee models. J Biomech (2004) 1.62
Effects of bisphosphonates on proliferation and osteoblast differentiation of human bone marrow stromal cells. Biomaterials (2005) 1.61
Tibiofemoral kinematics and condylar motion during the stance phase of gait. J Biomech (2009) 1.59
Economic evaluation in total hip arthroplasty: analysis and review of the literature. J Arthroplasty (2004) 1.55
The cartilage thickness distribution in the tibiofemoral joint and its correlation with cartilage-to-cartilage contact. Clin Biomech (Bristol, Avon) (2005) 1.48
Differences of knee anthropometry between Chinese and white men and women. J Arthroplasty (2010) 1.47
Optimizing flexion after total knee arthroplasty: advances in prosthetic design. Clin Orthop Relat Res (2003) 1.47
Does cruciate-retaining total knee arthroplasty enhance knee flexion in Western and East Asian patient populations? A meta-analysis. Knee (2013) 1.41
A new paradigm, a follow-up letter to the editor of the journal of arthroplasty. J Arthroplasty (2014) 1.40
The value of the dedicated orthopaedic trauma operating room. J Trauma (2006) 1.40
Effect of radiation, heat, and aging on in vitro wear resistance of polyethylene. Clin Orthop Relat Res (2003) 1.39
Characterization of irradiated blends of alpha-tocopherol and UHMWPE. Biomaterials (2005) 1.38
Risk of complication and revision total hip arthroplasty among Medicare patients with different bearing surfaces. Clin Orthop Relat Res (2010) 1.37
Proprioception, kinesthesia, and balance after total knee arthroplasty with cruciate-retaining and posterior stabilized prostheses. J Bone Joint Surg Am (2004) 1.37
Large diameter femoral heads on highly cross-linked polyethylene: minimum 3-year results. Clin Orthop Relat Res (2006) 1.33
Reconstruction of a ruptured patellar tendon with achilles tendon allograft following total knee arthroplasty. J Bone Joint Surg Am (2002) 1.32
Experimental assessment of precision and accuracy of radiostereometric analysis for the determination of polyethylene wear in a total hip replacement model. J Orthop Res (2002) 1.32
In vivo oxidation of retrieved cross-linked ultra-high-molecular-weight polyethylene acetabular components with residual free radicals. J Arthroplasty (2006) 1.30
Radiostereometric analysis comparison of wear of highly cross-linked polyethylene against 36- vs 28-mm femoral heads. J Arthroplasty (2007) 1.29
In vivo patellar tracking: clinical motions and patellofemoral indices. J Orthop Res (2008) 1.29
Vascularized compared with nonvascularized fibular grafting for the treatment of osteonecrosis of the femoral head. J Bone Joint Surg Am (2003) 1.28
In vivo kinematics of the ACL during weight-bearing knee flexion. J Orthop Res (2005) 1.24
The next critical role of orthopedic registries. Acta Orthop (2015) 1.23
Analysis of long-term cemented total hip arthroplasty retrievals. Clin Orthop Relat Res (2002) 1.20
Anterior tibial post impingement in a posterior stabilized total knee arthroplasty. J Orthop Res (2005) 1.20
Knee kinematics with a high-flexion posterior stabilized total knee prosthesis: an in vitro robotic experimental investigation. J Bone Joint Surg Am (2004) 1.20
Predictors of discharge to an inpatient extended care facility after total hip or knee arthroplasty. J Arthroplasty (2006) 1.19
Alternative materials to improve total hip replacement tribology. Acta Orthop Scand (2003) 1.18
Effect of duty hour standards on burnout among orthopaedic surgery residents. Clin Orthop Relat Res (2006) 1.17
Risk factors for early revision after primary total hip arthroplasty in Medicare patients. Clin Orthop Relat Res (2014) 1.17
Estimating risk in Medicare patients with THA: an electronic risk calculator for periprosthetic joint infection and mortality. Clin Orthop Relat Res (2012) 1.16
The painful total hip replacement. Clin Orthop Relat Res (2004) 1.15
Femoral head sizes larger than 32 mm against highly cross-linked polyethylene. Clin Orthop Relat Res (2002) 1.15
Impact of hospital volume on the economic value of computer navigation for total knee replacement. J Bone Joint Surg Am (2008) 1.14
Third-body wear of highly cross-linked polyethylene in a hip simulator. J Arthroplasty (2003) 1.14
High placement of noncemented acetabular components in revision total hip arthroplasty. A concise follow-up, at a minimum of fifteen years, of a previous report. J Bone Joint Surg Am (2006) 1.14
Risk factors for early revision after primary TKA in Medicare patients. Clin Orthop Relat Res (2014) 1.12
Medicare physician reimbursement: past, present, and future. J Bone Joint Surg Am (2007) 1.12
Comparison of femoral head penetration using RSA and the Martell method. Clin Orthop Relat Res (2006) 1.12
Minimum 6-year followup of highly cross-linked polyethylene in THA. Clin Orthop Relat Res (2007) 1.11
In vivo tibiofemoral cartilage deformation during the stance phase of gait. J Biomech (2009) 1.10
In situ forces of the anterior and posterior cruciate ligaments in high knee flexion: an in vitro investigation. J Orthop Res (2004) 1.10
Knee-simulator testing of conventional and cross-linked polyethylene tibial inserts. J Arthroplasty (2004) 1.10
Differences in patient and procedure characteristics and hospital resource use in primary and revision total joint arthroplasty: a multicenter study. J Arthroplasty (2005) 1.10
Simulated normal gait wear testing of a highly cross-linked polyethylene tibial insert. J Arthroplasty (2007) 1.10
Does the Risk Assessment and Prediction Tool predict discharge disposition after joint replacement? Clin Orthop Relat Res (2015) 1.07
Do high flexion posterior stabilised total knee arthroplasty designs increase knee flexion? A meta analysis. Int Orthop (2011) 1.06
The effect of real-time aging on the oxidation and wear of highly cross-linked UHMWPE acetabular liners. Biomaterials (2005) 1.06
Surface analysis of early retrieved acetabular polyethylene liners: a comparison of conventional and highly crosslinked polyethylenes. J Arthroplasty (2004) 1.06
In vivo cartilage contact deformation of human ankle joints under full body weight. J Orthop Res (2008) 1.05
Acetabular anatomy and transacetabular screw fixation at the high hip center. Clin Orthop Relat Res (2005) 1.05
Six DOF in vivo kinematics of the ankle joint complex: Application of a combined dual-orthogonal fluoroscopic and magnetic resonance imaging technique. J Orthop Res (2006) 1.05
Is administratively coded comorbidity and complication data in total joint arthroplasty valid? Clin Orthop Relat Res (2013) 1.05
Steady-state penetration rates of electron beam-irradiated, highly cross-linked polyethylene at an average 45-month follow-up. J Arthroplasty (2006) 1.03
An analysis of medicare payment policy for total joint arthroplasty. J Arthroplasty (2008) 1.03
Macrophage response to cross-linked and conventional UHMWPE. Biomaterials (2003) 1.00
Femoral rollback after cruciate-retaining and stabilizing total knee arthroplasty. Clin Orthop Relat Res (2003) 1.00
Kinematics of the knee at high flexion angles: an in vitro investigation. J Orthop Res (2004) 1.00
Optical analysis of surface changes on early retrievals of highly cross-linked and conventional polyethylene tibial inserts. J Arthroplasty (2003) 0.99
Morphology of the medial collateral ligament of the knee. J Orthop Surg Res (2010) 0.99
Gender differences in the knees of Chinese population. Knee Surg Sports Traumatol Arthrosc (2010) 0.97
The coupled motion of the femur and patella during in vivo weightbearing knee flexion. J Biomech Eng (2007) 0.97
Human macrophage response to UHMWPE, TiAlV, CoCr, and alumina particles: analysis of multiple cytokines using protein arrays. J Biomed Mater Res A (2008) 0.97
Assessing osteolysis with use of high-throughput protein chips. J Bone Joint Surg Am (2007) 0.97
Aggressive wear testing of a cross-linked polyethylene in total knee arthroplasty. Clin Orthop Relat Res (2002) 0.96
Stress fracture of the medial wall of the acetabulum adjacent to a cementless acetabular component. J Arthroplasty (2002) 0.95
The efficacy of BMP-2 to induce bone ingrowth in a total hip replacement model. Clin Orthop Relat Res (2003) 0.95
Isolated acetabular revision through the posterior approach: short-term results after revision of a recalled acetabular component. J Arthroplasty (2005) 0.95
The kinematics of fixed- and mobile-bearing total knee arthroplasty. Clin Orthop Relat Res (2003) 0.94
Comparison of two digital radiostereometric analysis methods in the determination of femoral head penetration in a total hip replacement phantom. J Orthop Res (2004) 0.94
Metrology to quantify wear and creep of polyethylene tibial knee inserts. Clin Orthop Relat Res (2003) 0.94
Knee simulator wear of polyethylene tibias articulating against explanted rough femoral components. Clin Orthop Relat Res (2004) 0.94