Published in J Arthroplasty on January 01, 2005
The Frank Stinchfield Award: Dislocation in revision THA: do large heads (36 and 40 mm) result in reduced dislocation rates in a randomized clinical trial? Clin Orthop Relat Res (2012) 2.11
High incidence of squeaking in THAs with alumina ceramic-on-ceramic bearings. Clin Orthop Relat Res (2008) 1.72
Femoral head size and wear of highly cross-linked polyethylene at 5 to 8 years. Clin Orthop Relat Res (2009) 1.37
The capsule's contribution to total hip construct stability--a finite element analysis. J Orthop Res (2011) 1.28
Do large heads enhance stability and restore native anatomy in primary total hip arthroplasty? Clin Orthop Relat Res (2011) 1.26
The 2012 John Charnley Award: Clinical multicenter studies of the wear performance of highly crosslinked remelted polyethylene in THA. Clin Orthop Relat Res (2013) 1.10
Head size and dislocation rate in primary total hip arthroplasty. Indian J Orthop (2013) 0.95
Do large femoral heads reduce the risks of impingement in total hip arthroplasty with optimal and non-optimal cup positioning? Int Orthop (2010) 0.95
Femoral head size does not affect ion values in metal-on-metal total hips. Clin Orthop Relat Res (2011) 0.93
Intra-prosthetic dislocation of dual-mobility cups after total hip arthroplasty: potential causes from a clinical and biomechanical perspective. Int Orthop (2015) 0.91
Reasons for revision of first-generation highly cross-linked polyethylenes. J Arthroplasty (2010) 0.91
Effect of femoral head size on metal-on-HXLPE hip arthroplasty outcome in a combined analysis of six national and regional registries. J Bone Joint Surg Am (2014) 0.91
Distributed analysis of hip implants using six national and regional registries: comparing metal-on-metal with metal-on-highly cross-linked polyethylene bearings in cementless total hip arthroplasty in young patients. J Bone Joint Surg Am (2014) 0.91
Stability and trunnion wear potential in large-diameter metal-on-metal total hips: a finite element analysis. Clin Orthop Relat Res (2014) 0.89
Low early and late dislocation rates with 36- and 40-mm heads in patients at high risk for dislocation. Clin Orthop Relat Res (2013) 0.89
No clinical difference between large metal-on-metal total hip arthroplasty and 28-mm-head total hip arthroplasty? Int Orthop (2011) 0.88
Does the extent of osteonecrosis affect the survival of hip resurfacing? Clin Orthop Relat Res (2013) 0.87
Fractures of a sandwich ceramic liner at ten year follow-up. Int Orthop (2011) 0.85
Similar range of motion and function after resurfacing large-head or standard total hip arthroplasty. Acta Orthop (2013) 0.85
Activities of daily living after total hip arthroplasty. Is a 32-mm femoral head superior to a 26-mm head for improving daily activities? Int Orthop (2009) 0.84
What is the midterm survivorship and function after hip resurfacing? Clin Orthop Relat Res (2010) 0.84
Bony impingement depends on the bone morphology of the hip after total hip arthroplasty. Int Orthop (2013) 0.83
A cadaveric study of posterior dislocation after total hip replacement-effects of head diameter and acetabular anteversion. Int Orthop (2010) 0.82
More than 50% reduction of wear in polyethylene liners with alumina heads compared to cobalt-chrome heads in hip replacements: a 10-year follow-up with radiostereometry in 43 hips. Acta Orthop (2013) 0.82
Bony impingement limits design-related increases in hip range of motion. Clin Orthop Relat Res (2012) 0.82
Radiology of the resurfaced hip. Skeletal Radiol (2011) 0.81
Risk of dislocation using large- vs. small-diameter femoral heads in total hip arthroplasty. BMC Res Notes (2012) 0.81
Alumina-on-alumina total hip replacement for femoral neck fracture in healthy patients. BMC Musculoskelet Disord (2011) 0.81
Patients report improvement in quality of life and satisfaction after hip resurfacing arthroplasty. Clin Orthop Relat Res (2013) 0.80
Oxidized Zirconium Head on Crosslinked Polyethylene Liner in Total Hip Arthroplasty: A 7- to 12-year In Vivo Comparative Wear Study. Clin Orthop Relat Res (2015) 0.80
Large fixed-size metal-on-metal total hip arthroplasty: higher serum metal ion levels in patients with pain. Int Orthop (2014) 0.80
Review on squeaking hips. World J Orthop (2015) 0.79
Low femoral antetorsion and total hip arthroplasty: a risk factor. Int Orthop (2014) 0.78
The envelope of passive motion allowed by the capsular ligaments of the hip. J Biomech (2015) 0.78
Biomechanical evaluation of a biomimetic spinal construct. J Exp Orthop (2014) 0.77
Dual mobility cups provide biomechanical advantages in situations at risk for dislocation: a finite element analysis. Int Orthop (2017) 0.77
Increased risk of revision of cementless stemmed total hip arthroplasty with metal-on-metal bearings. Acta Orthop (2015) 0.76
The minimal invasive direct anterior approach in combination with large heads in total hip arthroplasty - is dislocation still a major issue? a case control study. BMC Musculoskelet Disord (2014) 0.76
Range of Movement for Impingement and Dislocation Avoidance in Total Hip Replacement Predicted by Finite Element Model. J Med Biol Eng (2017) 0.75
Effect of femoral neck modularity upon the prosthetic range of motion in total hip arthroplasty. Med Biol Eng Comput (2014) 0.75
A Novel Approach for Dynamic Testing of Total Hip Dislocation under Physiological Conditions. PLoS One (2015) 0.75
The Current Concepts of Total Hip Arthroplasty. Hip Pelvis (2016) 0.75
Large diameter metal on metal total hip replacement for femoral neck fractures with neurological conditions: A retrospective assessment. Indian J Orthop (2014) 0.75
Constrained liners, dual mobility or large diameter heads to avoid dislocation in THA. EFORT Open Rev (2017) 0.75
Risk factors for poor hip flexion after total hip arthroplasty for the treatment of ankylosing spondylitis a multivariate analysis. Clin Rheumatol (2014) 0.75
In Vivo Damage of the Head-Neck Junction in Hard-on-Hard Total Hip Replacements: Effect of Femoral Head Size, Metal Combination, and 12/14 Taper Design. Materials (Basel) (2017) 0.75
Wear testing and particle characterisation of sequentially crosslinked polyethylene acetabular liners using different femoral head sizes. J Mater Sci Mater Med (2013) 0.75
The etiology of osteoarthritis of the hip: an integrated mechanical concept. Clin Orthop Relat Res (2008) 4.63
Rates and outcomes of primary and revision total hip replacement in the United States medicare population. J Bone Joint Surg Am (2003) 4.38
Optimal low-density lipoprotein is 50 to 70 mg/dl: lower is better and physiologically normal. J Am Coll Cardiol (2004) 4.07
Incidence rates of dislocation, pulmonary embolism, and deep infection during the first six months after elective total hip replacement. J Bone Joint Surg Am (2003) 3.33
Association of hospital and surgeon volume of total hip replacement with functional status and satisfaction three years following surgery. Arthritis Rheum (2003) 2.98
Use of the Internet by pediatric orthopaedic outpatients. J Pediatr Orthop (2002) 1.61
A new paradigm, a follow-up letter to the editor of the journal of arthroplasty. J Arthroplasty (2014) 1.40
Effect of radiation, heat, and aging on in vitro wear resistance of polyethylene. Clin Orthop Relat Res (2003) 1.39
Characterization of irradiated blends of alpha-tocopherol and UHMWPE. Biomaterials (2005) 1.38
Large diameter femoral heads on highly cross-linked polyethylene: minimum 3-year results. Clin Orthop Relat Res (2006) 1.33
Experimental assessment of precision and accuracy of radiostereometric analysis for the determination of polyethylene wear in a total hip replacement model. J Orthop Res (2002) 1.32
In vivo oxidation of retrieved cross-linked ultra-high-molecular-weight polyethylene acetabular components with residual free radicals. J Arthroplasty (2006) 1.30
Radiostereometric analysis comparison of wear of highly cross-linked polyethylene against 36- vs 28-mm femoral heads. J Arthroplasty (2007) 1.29
The next critical role of orthopedic registries. Acta Orthop (2015) 1.23
Analysis of long-term cemented total hip arthroplasty retrievals. Clin Orthop Relat Res (2002) 1.20
Using the internet to enhance physician-patient communication. J Am Acad Orthop Surg (2006) 1.18
Alternative materials to improve total hip replacement tribology. Acta Orthop Scand (2003) 1.18
Femoral head sizes larger than 32 mm against highly cross-linked polyethylene. Clin Orthop Relat Res (2002) 1.15
Third-body wear of highly cross-linked polyethylene in a hip simulator. J Arthroplasty (2003) 1.14
High placement of noncemented acetabular components in revision total hip arthroplasty. A concise follow-up, at a minimum of fifteen years, of a previous report. J Bone Joint Surg Am (2006) 1.14
Comparison of femoral head penetration using RSA and the Martell method. Clin Orthop Relat Res (2006) 1.12
Minimum 6-year followup of highly cross-linked polyethylene in THA. Clin Orthop Relat Res (2007) 1.11
Knee-simulator testing of conventional and cross-linked polyethylene tibial inserts. J Arthroplasty (2004) 1.10
Simulated normal gait wear testing of a highly cross-linked polyethylene tibial insert. J Arthroplasty (2007) 1.10
The effect of real-time aging on the oxidation and wear of highly cross-linked UHMWPE acetabular liners. Biomaterials (2005) 1.06
Surface analysis of early retrieved acetabular polyethylene liners: a comparison of conventional and highly crosslinked polyethylenes. J Arthroplasty (2004) 1.06
Steady-state penetration rates of electron beam-irradiated, highly cross-linked polyethylene at an average 45-month follow-up. J Arthroplasty (2006) 1.03
Optical analysis of surface changes on early retrievals of highly cross-linked and conventional polyethylene tibial inserts. J Arthroplasty (2003) 0.99
Aggressive wear testing of a cross-linked polyethylene in total knee arthroplasty. Clin Orthop Relat Res (2002) 0.96
Stress fracture of the medial wall of the acetabulum adjacent to a cementless acetabular component. J Arthroplasty (2002) 0.95
The efficacy of BMP-2 to induce bone ingrowth in a total hip replacement model. Clin Orthop Relat Res (2003) 0.95
Isolated acetabular revision through the posterior approach: short-term results after revision of a recalled acetabular component. J Arthroplasty (2005) 0.95
Comparison of two digital radiostereometric analysis methods in the determination of femoral head penetration in a total hip replacement phantom. J Orthop Res (2004) 0.94
Metrology to quantify wear and creep of polyethylene tibial knee inserts. Clin Orthop Relat Res (2003) 0.94
Knee simulator wear of polyethylene tibias articulating against explanted rough femoral components. Clin Orthop Relat Res (2004) 0.94
The reproducibility of a kinematically-derived axis of the knee versus digitized anatomical landmarks using a knee navigation system. Open Biomed Eng J (2008) 0.93
The measurement of creep in ultrahigh molecular weight polyethylene: a comparison of conventional versus highly cross-linked polyethylene. J Arthroplasty (2005) 0.93
Gradient crosslinking of UHMWPE using irradiation in molten state for total joint arthroplasty. Biomaterials (2002) 0.91
Effects of femoral neck length, stem size, and body weight on strains in the proximal cement mantle. J Bone Joint Surg Am (2002) 0.91
Third-body wear testing of a highly cross-linked acetabular liner: the effect of large femoral head size in the presence of particulate poly(methyl-methacrylate) debris. J Arthroplasty (2005) 0.90
Comparison of hip simulator wear of 2 different highly cross-linked ultra high molecular weight polyethylene acetabular components using both 32- and 38-mm femoral heads. J Arthroplasty (2007) 0.90
Standing versus supine radiographs in RSA evaluation of femoral head penetration. Clin Orthop Relat Res (2006) 0.90
Ex vivo wear of conventional and cross-linked polyethylene acetabular liners. Clin Orthop Relat Res (2005) 0.89
Effect of lipid absorption on wear and compressive properties of unirradiated and highly crosslinked UHMWPE: an in vitro experimental model. Biomaterials (2004) 0.89
Polyethylene damage in total knees and use of highly crosslinked polyethylene. J Bone Joint Surg Am (2003) 0.89
The high hip center. Clin Orthop Relat Res (2004) 0.89
Effect of consolidation on adhesive and abrasive wear of ultra high molecular weight polyethylene. Biomaterials (2003) 0.86
Biologic fixation of total hip implants. Insights gained from a series of canine studies. J Bone Joint Surg Am (2004) 0.86
Contact stress assessment of conventional and highly crosslinked ultra high molecular weight polyethylene acetabular liners with finite element analysis and pressure sensitive film. J Biomed Mater Res B Appl Biomater (2007) 0.85
Revision of failed acetabular components with use of so-called jumbo noncemented components. A concise follow-up of a previous report. J Bone Joint Surg Am (2006) 0.85
Cementless acetabular revision with the Harris-Galante porous prosthesis. Results after a minimum of ten years of follow-up. J Bone Joint Surg Am (2004) 0.84
A new approach for the Martell 3-D method of measuring polyethylene wear without requiring the cross-table lateral films. J Orthop Res (2005) 0.82
The effect of surface finish and of vertical ribs on the stability of a cemented femoral stem: an in vitro stair climbing test. J Arthroplasty (2006) 0.82
Binding of radiolabeled porcine motilin and erythromycin lactobionate to smooth muscle membranes in various segments of the equine gastrointestinal tract. Am J Vet Res (2002) 0.82
Orthopaedic information: how to find it fast on the Internet. Instr Course Lect (2007) 0.79
Efficacy of revision surgery for the dislocating total hip arthroplasty: report from a large community registry. Clin Orthop Relat Res (2013) 0.79
Isolated acetabular revision with use of the Harris-Galante Cementless Component. Study with intermediate-term follow-up. J Bone Joint Surg Am (2004) 0.79
Effect of oral alendronate on net bone ingrowth into canine cementless total hips. J Arthroplasty (2005) 0.79
Primary cementless acetabular components in hips with severe developmental dysplasia or total dislocation. A concise follow-up, at an average of sixteen years, of a previous report. J Bone Joint Surg Am (2006) 0.78
Orthopaedic information: how to find it fast on the Internet. J Bone Joint Surg Am (2006) 0.78
Trends and predictors of opioid use after total knee and total hip arthroplasty. Pain (2016) 0.77
Response to Dr. Mont. J Arthroplasty (2013) 0.75
The electronic medical office: optimizing solutions. Instr Course Lect (2008) 0.75
The use of trans-vinylene formation in quantifying the spatial distribution of electron beam penetration in polyethylene. Single-sided, double-sided and shielded irradiation. Biomaterials (2003) 0.75
Polished vs rough femoral components in grade A and grade C-2 cement mantles. J Arthroplasty (2006) 0.75
Mode of loosening of matt-finished femoral stems in primary total hip replacement. Saudi Med J (2002) 0.75
A longitudinal comparative study of falls in persons with knee arthroplasty and persons with or at high risk for knee osteoarthritis. Age Ageing (2017) 0.75