Published in Dent Mater on November 14, 2005
The requirement of zinc and calcium ions for functional MMP activity in demineralized dentin matrices. Dent Mater (2010) 1.06
Effect of air-drying on the solvent evaporation, degree of conversion and water sorption/solubility of dental adhesive models. J Mater Sci Mater Med (2011) 0.89
Review of matrix metalloproteinases' effect on the hybrid dentin bond layer stability and chlorhexidine clinical use to prevent bond failure. Open Dent J (2010) 0.87
Impact of oxalate desensitizer combined with ethylene-diamine tetra acetic acid-conditioning on dentin bond strength of one-bottle adhesives during dry bonding. J Conserv Dent (2013) 0.77
Assessment of post-contamination treatments affecting different bonding stages to dentin. Eur J Dent (2016) 0.75
State of the art etch-and-rinse adhesives. Dent Mater (2010) 2.41
Dental adhesives of the future. J Adhes Dent (2002) 2.35
Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials (2005) 2.32
Water sorption/solubility of dental adhesive resins. Dent Mater (2006) 2.32
From dry bonding to water-wet bonding to ethanol-wet bonding. A review of the interactions between dentin matrix and solvated resins using a macromodel of the hybrid layer. Am J Dent (2007) 2.04
Have dentin adhesives become too hydrophilic? J Can Dent Assoc (2003) 2.00
Review of contemporary irrigant agitation techniques and devices. J Endod (2009) 1.99
Single-step adhesives are permeable membranes. J Dent (2003) 1.98
Changes in stiffness of demineralized dentin following application of collagen crosslinkers. J Biomed Mater Res B Appl Biomater (2008) 1.92
Guided tissue remineralisation of partially demineralised human dentine. Biomaterials (2007) 1.91
The effect of QMix, an experimental antibacterial root canal irrigant, on removal of canal wall smear layer and debris. J Endod (2011) 1.87
Geometric factors affecting dentin bonding in root canals: a theoretical modeling approach. J Endod (2005) 1.85
Reactivation of inactivated endogenous proteolytic activities in phosphoric acid-etched dentine by etch-and-rinse adhesives. Biomaterials (2006) 1.81
Monoblocks in root canals: a hypothetical or a tangible goal. J Endod (2007) 1.78
Calcium phosphate phase transformation produced by the interaction of the portland cement component of white mineral trioxide aggregate with a phosphate-containing fluid. J Endod (2007) 1.74
Microtensile bond strength between adhesive cements and root canal dentin. Dent Mater (2003) 1.71
Ultrastructural evaluation of the apical seal in roots filled with a polycaprolactone-based root canal filling material. J Endod (2005) 1.66
Water treeing--a potential mechanism for degradation of dentin adhesives. Am J Dent (2003) 1.63
Impact of the quality of coronal restoration versus the quality of root canal fillings on success of root canal treatment: a systematic review and meta-analysis. J Endod (2011) 1.63
Polymerization shrinkage and contraction stress of dental resin composites. Dent Mater (2005) 1.61
Antibacterial activity and bonding characteristics of an adhesive resin containing antibacterial monomer MDPB. Dent Mater (2003) 1.61
Activation of gelatinolytic/collagenolytic activity in dentin by self-etching adhesives. Eur J Oral Sci (2006) 1.57
Chlorhexidine stabilizes the adhesive interface: a 2-year in vitro study. Dent Mater (2009) 1.55
Cysteine cathepsins in human dentin-pulp complex. J Endod (2010) 1.52
Degree of conversion and permeability of dental adhesives. Eur J Oral Sci (2005) 1.51
Adhesion of endodontic sealers to dentin and gutta-percha. J Endod (2002) 1.50
Fitting complete dentures after multiple tooth extraction in a patient with severe dementia. Spec Care Dentist (2007) 1.49
Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part I. Single-step self-etching adhesive. J Adhes Dent (2003) 1.47
Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater (2005) 1.47
Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics. Dent Mater (2005) 1.46
A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials (2005) 1.44
In vitro degradation of resin-dentin bonds analyzed by microtensile bond test, scanning and transmission electron microscopy. Biomaterials (2003) 1.44
Solvent and water retention in dental adhesive blends after evaporation. Biomaterials (2005) 1.39
Optimizing dentin bond durability: control of collagen degradation by matrix metalloproteinases and cysteine cathepsins. Dent Mater (2012) 1.39
Host-derived loss of dentin matrix stiffness associated with solubilization of collagen. J Biomed Mater Res B Appl Biomater (2009) 1.38
Effect of vapor lock on root canal debridement by using a side-vented needle for positive-pressure irrigant delivery. J Endod (2010) 1.37
CD14 directly binds to triacylated lipopeptides and facilitates recognition of the lipopeptides by the receptor complex of Toll-like receptors 2 and 1 without binding to the complex. Cell Microbiol (2006) 1.33
An in vivo evaluation of bonding ability of comprehensive antibacterial adhesive system incorporating MDPB. Dent Mater (2006) 1.32
Critical review on methacrylate resin-based root canal sealers. J Endod (2010) 1.32
The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crowns. Dent Mater (2005) 1.31
Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials. J Prosthet Dent (2007) 1.30
Interfacial strength of Resilon and gutta-percha to intraradicular dentin. J Endod (2005) 1.29
Sealing properties of mineral trioxide aggregate orthograde apical plugs and root fillings in an in vitro apexification model. J Endod (2007) 1.28
The effect of chlorhexidine on dentin hybrid layers in vivo. Oper Dent (2007) 1.28
Use of a specific MMP-inhibitor (galardin) for preservation of hybrid layer. Dent Mater (2010) 1.27
Micromorphological changes in resin-dentin bonds after 1 year of water storage. J Biomed Mater Res (2002) 1.26
Substantivity of chlorhexidine to human dentin. Dent Mater (2010) 1.25
Post-surface conditioning improves interfacial adhesion in post/core restorations. Dent Mater (2005) 1.20
Strategies to prevent hydrolytic degradation of the hybrid layer-A review. Dent Mater (2013) 1.19
Resistance of ten contemporary adhesives to resin-dentine bond degradation. J Dent (2008) 1.19
Chlorhexidine binding to mineralized versus demineralized dentin powder. Dent Mater (2010) 1.17
Mineralisation of reconstituted collagen using polyvinylphosphonic acid/polyacrylic acid templating matrix protein analogues in the presence of calcium, phosphate and hydroxyl ions. Biomaterials (2010) 1.17
Setting properties and cytotoxicity evaluation of a premixed bioceramic root canal sealer. J Endod (2011) 1.17
Hierarchical and non-hierarchical mineralisation of collagen. Biomaterials (2010) 1.16
Influence of chlorhexidine concentration on the durability of etch-and-rinse dentin bonds: a 12-month in vitro study. J Adhes Dent (2009) 1.16
Chlorhexidine increases the longevity of in vivo resin-dentin bonds. Eur J Oral Sci (2010) 1.16
Initial in vitro biological response to contemporary endodontic sealers. J Endod (2006) 1.15
Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application. Am J Dent (2005) 1.15
Microtensile bond strength of total-etch and self-etching adhesives to caries-affected dentine. J Dent (2003) 1.15
Micropermeability of current self-etching and etch-and-rinse adhesives bonded to deep dentine: a comparison study using a double-staining/confocal microscopy technique. Eur J Oral Sci (2008) 1.15
Application of biologically-oriented dentin bonding principles to the use of endodontic irrigants. Am J Dent (2005) 1.14
Bonding of self-adhesive (self-etching) root canal sealers to radicular dentin. J Endod (2009) 1.14
Application of hydrophobic resin adhesives to acid-etched dentin with an alternative wet bonding technique. J Biomed Mater Res A (2008) 1.14
Strength influencing variables on CAD/CAM zirconia frameworks. Dent Mater (2007) 1.13
Water content and apparent stiffness of non-caries versus caries-affected human dentin. J Biomed Mater Res B Appl Biomater (2005) 1.13
SEM and TEM analysis of water degradation of human dentinal collagen. J Biomed Mater Res B Appl Biomater (2003) 1.13