Published in J Prosthet Dent on November 01, 2007
Graded structures for damage resistant and aesthetic all-ceramic restorations. Dent Mater (2009) 1.96
Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now? Dent Mater (2010) 1.26
In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion. Clin Oral Investig (2009) 1.02
Bond strength of resin cement to zirconia ceramic with different surface treatments. Lasers Med Sci (2012) 0.95
Effect of surface treatment on the micro-shear bond strength to zirconia. Saudi Dent J (2009) 0.86
Microshear bond strength evaluation of surface pretreated zirconia ceramics bonded to dentin. Eur J Dent (2015) 0.82
The effect of various primers on shear bond strength of zirconia ceramic and resin composite. J Conserv Dent (2013) 0.81
Thermocycling effect on microshear bond strength to zirconia ceramic using Er:YAG and tribochemical silica coating as surface conditioning. Lasers Med Sci (2013) 0.81
Bond strength of three luting agents to zirconia ceramic - influence of surface treatment and thermocycling. J Appl Oral Sci (2011) 0.80
Bonding of resin cement to zirconia with high pressure primer coating. PLoS One (2014) 0.78
Novel zirconia surface treatments for enhanced osseointegration: laboratory characterization. Int J Dent (2014) 0.78
Finite element analysis of adhesive endo-crowns of molars at different height levels of buccally applied load. J Dent Biomech (2012) 0.78
Improved Resin-Zirconia Bonding by Room Temperature Hydrofluoric Acid Etching. Materials (Basel) (2015) 0.77
Influence of cement thickness on resin-zirconia microtensile bond strength. J Adv Prosthodont (2011) 0.77
Three-dimensional finite element analysis of anterior two-unit cantilever resin-bonded fixed dental prostheses. ScientificWorldJournal (2015) 0.77
Long term water storage deteriorates bonding of composite resin to alumina and zirconia short communication. Open Dent J (2013) 0.76
Effect of various intraoral repair systems on the shear bond strength of composite resin to zirconia. J Adv Prosthodont (2013) 0.75
Effect of Coloring-by-Dipping on Microtensile Bond Strength of Zirconia to Resin Cement. J Dent (Tehran) (2015) 0.75
The Effect of UV Treatment on the Osteoconductive Capacity of Zirconia-Based Materials. Materials (Basel) (2016) 0.75
The effect of subpressure on the bond strength of resin to zirconia ceramic. PLoS One (2017) 0.75
Deposition of crystalline hydroxyapatite nano-particle on zirconia ceramic: a potential solution for the poor bonding characteristic of zirconia ceramics to resin cement. J Mater Sci Mater Med (2017) 0.75
A novel etching technique for surface treatment of zirconia ceramics to improve adhesion of resin-based luting cements. Acta Biomater Odontol Scand (2017) 0.75
Polymerization shrinkage and contraction stress of dental resin composites. Dent Mater (2005) 1.61
Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater (2005) 1.47
Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics. Dent Mater (2005) 1.46
The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crowns. Dent Mater (2005) 1.31
Application of biologically-oriented dentin bonding principles to the use of endodontic irrigants. Am J Dent (2005) 1.14
Strength influencing variables on CAD/CAM zirconia frameworks. Dent Mater (2007) 1.13
Bridging the gap between clinical failure and laboratory fracture strength tests using a fractographic approach. Dent Mater (2008) 1.12
The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent (2003) 1.11
Effect of zirconia type on its bond strength with different veneer ceramics. J Prosthodont (2008) 1.10
Long-term degradation of enamel and dentin bonds: 6-year results in vitro vs. in vivo. Dent Mater (2010) 1.05
Four-year water degradation of a total-etch and two self-etching adhesives bonded to dentin. J Dent (2008) 1.05
Mechanical properties of glass ionomer cements affected by curing methods. Dent Mater (2004) 1.02
Microtensile bond strength of different components of core veneered all-ceramic restorations. Part 3: double veneer technique. J Prosthodont (2007) 0.99
A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int (2010) 0.97
Efficacy of microtensile versus microshear bond testing for evaluation of bond strength of dental adhesive systems to enamel. Dent Mater (2010) 0.96
Performance of five commercially available tooth color-measuring devices. J Prosthodont (2007) 0.96
The effects of thermal mismatch and fabrication procedures on the deflection of layered all-ceramic discs. Dent Mater (2005) 0.94
Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dent Mater (2003) 0.93
Effect of loading method on the fracture mechanics of two layered all-ceramic restorative systems. Dent Mater (2006) 0.92
Approach for valuating the influence of laboratory simulation. Dent Mater (2008) 0.90
The influence of multiple firing on thermal contraction of ceramic materials used for the fabrication of layered all-ceramic dental restorations. Dent Mater (2005) 0.89
In situ transformation of glass-ionomer into an enamel-like material. Am J Dent (2004) 0.88
Prestresses in bilayered all-ceramic restorations. J Biomed Mater Res B Appl Biomater (2008) 0.88
The influence of environmental conditions on the material properties of setting glass-ionomer cements. Dent Mater (2006) 0.87
Nanohybrid vs. fine hybrid composite in extended Class II cavities after six years. Dent Mater (2011) 0.86
Early and long-term wear of 'fast-set' conventional glass-ionomer cements. Dent Mater (2005) 0.86
Effect of an experimental zirconia-silica coating technique on micro tensile bond strength of zirconia in different priming conditions. Dent Mater (2012) 0.85
Innovations in bonding to zirconia based ceramics: Part III. Phosphate monomer resin cements. Dent Mater (2010) 0.85
Influence of thermal and mechanical load cycling on the microtensile bond strength of self-etching adhesives. Am J Dent (2007) 0.85
The effects of common errors on sealing ability of total-etch adhesives. Dent Mater (2005) 0.85
Quantitative clinical evaluation of esthetic properties of incisors. Dent Mater (2007) 0.85
Polymerization contraction stress in dentin adhesives bonded to dentin and enamel. Dent Mater (2008) 0.84
Influence of surface pretreatment of fiber posts on cement delamination. Dent Mater (2010) 0.84
The effect of adhesives with various degrees of hydrophilicity on resin ceramic bond durability. Dent Mater (2004) 0.83
Effect of veneering method on the fracture and bond strength of bilayered zirconia restorations. Int J Prosthodont (2008) 0.83
Comparing subjective and objective measures of headgear compliance. Am J Orthod Dentofacial Orthop (2007) 0.82
Benefits of a two-step cementation procedure for prefabricated fiber posts. J Adhes Dent (2010) 0.82
Microtensile bond strength of three simplified adhesive systems to caries-affected dentin. J Adhes Dent (2010) 0.82
Pilot in vivo image spectro-photometric evaluation of optical properties of pure enamel and enamel-dentin complex. Dent Mater (2010) 0.82
Bonding to zirconia using a new surface treatment. J Prosthodont (2010) 0.81
Fracture toughness comparison of three test methods with four dental porcelains. Dent Mater (2006) 0.81
Shrinkage kinetics of a methacrylate- and a silorane-based resin composite: effect on marginal integrity. J Adhes Dent (2013) 0.81
Sensitization to palladium in Europe. Contact Dermatitis (2014) 0.81
A literature review of two-unit cantilevered FPDs. Int J Prosthodont (2004) 0.81
Contraction stress and bond strength to dentinfor compatible and incompatible combinations of bonding systems and chemical and light-cured core build-up resin composites. Dent Mater (2006) 0.81
Influence of water sorption on resin composite color and color variation amongst various composite brands with identical shade code: an in vitro evaluation. J Dent (2011) 0.81
Effectiveness of preparation guidelines for an all-ceramic restorative system. Am J Dent (2004) 0.80
Sensitization to palladium and nickel in Europe and the relationship with oral disease and dental alloys. Contact Dermatitis (2015) 0.80
Effect of pre-etching enamel on fatigue of self-etch adhesive bonds. Dent Mater (2007) 0.80
Effect of conditioning time of self-etching primers on dentin bond strength of three adhesive resin cements. Dent Mater (2005) 0.80
The influence of different bracket base surfaces on tensile and shear bond strength. Eur J Orthod (2008) 0.80
Fatigue testing of enamel bonds with self-etch and total-etch adhesive systems. Dent Mater (2005) 0.80
Microtensile bond strength and impact energy of fracture of CAD-veneered zirconia restorations. J Prosthodont (2008) 0.80
Palladium-based dental alloys are associated with oral disease and palladium-induced immune responses. Contact Dermatitis (2014) 0.80
Fracture toughness determination of two dental porcelains with the indentation strength in bending method. Dent Mater (2006) 0.79
Influence of polymerization mode and C-factor on cohesive strength of dual-cured resin cements. Dent Mater (2012) 0.79
Fracture strength and fatigue resistance of dental resin-based composites. Dent Mater (2009) 0.79
Bond efficacy and interface morphology of self-etching adhesives to ground enamel. J Adhes Dent (2010) 0.79
In vitro exploration and finite element analysis of failure mechanisms of resin-bonded fixed partial dentures. J Prosthodont (2008) 0.78
Static and dynamic failure load of fiber-reinforced composite and particulate filler composite cantilever resin-bonded fixed dental prostheses. J Adhes Dent (2010) 0.78
Ultrafast photoinduced electron transfer within a self-assembled donor-acceptor system. J Phys Chem A (2005) 0.78
Relation in color of three regions of vital human incisors. Dent Mater (2004) 0.78
Influence of retainer design on two-unit cantilever resin-bonded glass fiber reinforced composite fixed dental prostheses: an in vitro and finite element analysis study. J Adhes Dent (2008) 0.78
Finite element analysis model to simulate the behavior of luting cements during setting. Dent Mater (2005) 0.78
Influence of fatigue loading on the performance of adhesive and nonadhesive luting cements for cast post-and-core buildups in maxillary premolars. Int J Prosthodont (2004) 0.78
The influence of framework design on the load-bearing capacity of laboratory-made inlay-retained fibre-reinforced composite fixed dental prostheses. J Biomech (2009) 0.78
Influence of a nanoporous zirconia implant surface of on cell viability of human osteoblasts. J Prosthodont (2013) 0.78
The influence of dynamic fatigue loading on the separate components of the bracket-cement-enamel system. Am J Dent (2008) 0.78
Modeling of the viscoelastic behavior of dental light-activated resin composites during curing. Dent Mater (2003) 0.78
In vitro adherence of oral streptococci to zirconia core and veneering glass-ceramics. J Biomed Mater Res B Appl Biomater (2009) 0.77
Relations in color among maxillary incisors and canines. Dent Mater (2005) 0.77