Published in J Biomech on June 17, 2008
Constrained cups appear incapable of meeting the demands of revision THA. Clin Orthop Relat Res (2012) 1.02
2009 Nicolas Andry Award: clinical biomechanics of third body acceleration of total hip wear. Clin Orthop Relat Res (2009) 0.98
Risk of impingement and third-body abrasion with 28-mm metal-on-metal bearings. Clin Orthop Relat Res (2014) 0.79
Impingement and dislocation in total hip arthroplasty: mechanisms and consequences. Iowa Orthop J (2014) 0.76
Scratching vulnerability of conventional vs highly cross-linked polyethylene liners because of large embedded third-body particles. J Arthroplasty (2011) 0.76
A simulator study of adverse wear with metal and cement debris contamination in metal-on-metal hip bearings. Bone Joint Res (2014) 0.75
Anterior subluxation after total hip replacement confirmed by radiographs: report of two cases. Adv Orthop (2011) 0.75
Characterization of long-term femoral-head-penetration rates. Association with and prediction of osteolysis. J Bone Joint Surg Am (2000) 2.02
Wear of polyethylene acetabular components in total hip arthroplasty. An analysis of one hundred and twenty-eight components retrieved at autopsy or revision operations. J Bone Joint Surg Am (1997) 1.91
Impingement in total hip arthroplasty a study of retrieved acetabular components. J Arthroplasty (2005) 1.70
Impingement and loosening of the long posterior wall acetabular implant. J Bone Joint Surg Br (1992) 1.45
Surface roughness of ceramic femoral heads after in vivo transfer of metal: correlation to polyethylene wear. J Bone Joint Surg Am (2005) 1.22
The spatial location of impingement in total hip arthroplasty. J Arthroplasty (2000) 1.19
Mechanisms of failure of total hip replacements: lessons learned from retrieval studies. Clin Orthop Relat Res (2004) 1.18
Third-body wear of highly cross-linked polyethylene in a hip simulator. J Arthroplasty (2003) 1.14
Wear of gamma-crosslinked polyethylene acetabular cups against roughened femoral balls. Clin Orthop Relat Res (1999) 1.12
Complications of trochanteric osteotomy in total hip replacement. J Bone Joint Surg Am (1978) 1.11
Polyethylene and metal debris generated by non-articulating surfaces of modular acetabular components. J Bone Joint Surg Br (1994) 1.09
Abrasive wear of ceramic, metal, and UHMWPE bearing surfaces from third-body bone, PMMA bone cement, and titanium debris. Biomed Mater Eng (1994) 1.05
Rheology of joint fluid in total knee arthroplasty patients. J Orthop Res (2002) 1.02
Telemeterized in vivo hip joint force data: a report on two patients after total hip surgery. J Orthop Res (1991) 1.02
Polyethylene wear in total hip and knee arthroplasties. J Biomed Mater Res (1997) 0.99
Friction and wear properties of polymer, metal, and ceramic prosthetic joint materials evaluated on a multichannel screening device. J Biomed Mater Res (1981) 0.95
Wear of polyethylene cups in total hip arthroplasty. A study of specimens retrieved post mortem. J Bone Joint Surg Am (1996) 0.95
The Frank Stinchfield Award. Contribution of cable debris generation to accelerated polyethylene wear. Clin Orthop Relat Res (1997) 0.95
Effect of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene acetabular cups. J Arthroplasty (1998) 0.95
Features of the synovial fluid film in human joint lubrication. Nature (1970) 0.94
Comparative wear and wear debris under three different counterface conditions of crosslinked and non-crosslinked ultra high molecular weight polyethylene. Biomed Mater Eng (2001) 0.94
A tribological study of retrieved hip prostheses. Clin Orthop Relat Res (1992) 0.93
Analysis of particles in acetabular components from patients with osteolysis. Clin Orthop Relat Res (1997) 0.93
Association of third body embedment with rim damage in retrieved acetabular liners. Clin Orthop Relat Res (2007) 0.92
Polyethylene wear vector in vivo: a three-dimensional analysis using retrieved acetabular components and radiographs. J Orthop Res (1999) 0.92
Direction and rate of socket wear in Charnley low-friction arthroplasty. J Bone Joint Surg Br (1985) 0.91
A hip joint simulator study using new and physiologically scratched femoral heads with ultra-high molecular weight polyethylene acetabular cups. Proc Inst Mech Eng H (2000) 0.90
The wear behavior of ion-implanted Ti-6A1-4V against UHMW polyethylene. J Biomed Mater Res (1990) 0.90
Articular interposition of trochanteric wires in a failed total hip replacement. Clin Orthop Relat Res (1977) 0.90
Prevalence of impingement in explanted Charnley acetabular components. J Orthop Sci (1998) 0.89
Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions. Biomaterials (2005) 0.87
Prediction of lubricating film thickness in UHMWPE hip joint replacements. J Biomech (2001) 0.87
Effects of implant design parameters on fluid convection, potentiating third-body debris ingress into the bearing surface during THA impingement/subluxation. J Biomech (2007) 0.85
Can component and patient factors account for the variance in wear rates among bilateral total hip arthroplasty patients? J Arthroplasty (2003) 0.85
Socket wear in bilateral simultaneous total hip arthroplasty. J Arthroplasty (2001) 0.84
Modeling of damage to articulating surfaces by third body particles in total joint replacements. J Mater Sci Mater Med (2000) 0.83
Third-body wear of cobalt-chromium-molybdenum implant alloys initiated by bone and poly(methyl methacrylate) particles. J Biomed Mater Res (2000) 0.81
An indirect comparison of third-body wear in retrieved hydroxyapatite-coated, porous, and cemented femoral components. Clin Orthop Relat Res (1994) 0.80
Elemental and morphological identification of third-body particulate and calcium stearate inclusions in polyethylene components. J Biomed Mater Res (2000) 0.77
Metallic instrument debris: a source of third-body wear particles? J Arthroplasty (2000) 0.77
Atypical subtrochanteric and diaphyseal femoral fractures: report of a task force of the American Society for Bone and Mineral Research. J Bone Miner Res (2010) 6.00
Atypical subtrochanteric and diaphyseal femoral fractures: second report of a task force of the American Society for Bone and Mineral Research. J Bone Miner Res (2013) 5.76
Joint injury, repair, and remodeling: roles in post-traumatic osteoarthritis. Clin Orthop Relat Res (2004) 2.43
Osteonecrosis of the hip: management in the 21st century. Instr Course Lect (2003) 2.42
Minimally invasive total hip arthroplasty. Development, early results, and a critical analysis. Presented at the Annual Meeting of the American Orthopaedic Association, Charleston, South Carolina, USA, June 14, 2003. J Bone Joint Surg Am (2003) 2.11
Risk factors for intrahepatic and extrahepatic cholangiocarcinoma: a hospital-based case-control study. Am J Gastroenterol (2007) 1.96
Results of Charnley total hip arthroplasty at a minimum of thirty years. A concise follow-up of a previous report. J Bone Joint Surg Am (2004) 1.82
Cementless acetabular fixation at fifteen years. A comparison with the same surgeon's results following acetabular fixation with cement. J Bone Joint Surg Am (2004) 1.82
Quantifying tibial plafond fracture severity: absorbed energy and fragment displacement agree with clinical rank ordering. J Orthop Res (2008) 1.76
Spatial distribution of hip capsule structural and material properties. J Biomech (2002) 1.67
Kinematics, kinetics, and finite element analysis of commonplace maneuvers at risk for total hip dislocation. J Biomech (2003) 1.66
Oral capecitabine for the treatment of hepatocellular carcinoma, cholangiocarcinoma, and gallbladder carcinoma. Cancer (2004) 1.62
Association between hypothyroidism and hepatocellular carcinoma: a case-control study in the United States. Hepatology (2009) 1.62
Prophylaxis for thromboembolic disease: recommendations from the American College of Chest Physicians--are they appropriate for orthopaedic surgery? J Arthroplasty (2005) 1.61
Interfragmentary surface area as an index of comminution severity in cortical bone impact. J Orthop Res (2004) 1.61
Osteolysis associated with a cemented modular posterior-cruciate-substituting total knee design : five to eight-year follow-up. J Bone Joint Surg Am (2002) 1.58
Patient-specific finite element analysis of chronic contact stress exposure after intraarticular fracture of the tibial plafond. J Orthop Res (2008) 1.58
Differences in short-term complications between spinal and general anesthesia for primary total knee arthroplasty. J Bone Joint Surg Am (2013) 1.51
Current etiologies and modes of failure in total knee arthroplasty revision. Clin Orthop Relat Res (2006) 1.47
Orthopaedic crossfire--Larger femoral heads: a triumph of hope over reason! In the affirmative. J Arthroplasty (2003) 1.46
Impact of comorbidities on the measurement of health in patients with ankle osteoarthritis. J Bone Joint Surg Am (2006) 1.43
The Agility total ankle arthroplasty. Seven to sixteen-year follow-up. J Bone Joint Surg Am (2004) 1.41
A risk calculator for short-term morbidity and mortality after hip fracture surgery. J Orthop Trauma (2014) 1.41
Adverse outcomes in hip arthroplasty: long-term trends. J Bone Joint Surg Am (2012) 1.40
Objective CT-based metrics of articular fracture severity to assess risk for posttraumatic osteoarthritis. J Orthop Trauma (2010) 1.39
Case challenges in hip surgery: what would you do? Orthopedics (2002) 1.38
Compliance-dependent load allocation between sensing versus non-sensing portions of a sheet-array contact stress sensor. Iowa Orthop J (2009) 1.37
Oxidant conditioning protects cartilage from mechanically induced damage. J Orthop Res (2010) 1.36
Phase II trial of systemic continuous fluorouracil and subcutaneous recombinant interferon Alfa-2b for treatment of hepatocellular carcinoma. J Clin Oncol (2003) 1.36
Radiographic structural abnormalities associated with premature, natural hip-joint failure. J Bone Joint Surg Am (2011) 1.33
Chondrocyte senescence, joint loading and osteoarthritis. Clin Orthop Relat Res (2004) 1.31
Perspectives on chondrocyte mechanobiology and osteoarthritis. Biorheology (2006) 1.31
The capsule's contribution to total hip construct stability--a finite element analysis. J Orthop Res (2011) 1.28
Distribution and progression of chondrocyte damage in a whole-organ model of human ankle intra-articular fracture. J Bone Joint Surg Am (2011) 1.26
A new animal model of femoral head osteonecrosis: one that progresses to human-like mechanical failure. J Orthop Res (2002) 1.25
Baseline articular contact stress levels predict incident symptomatic knee osteoarthritis development in the MOST cohort. J Orthop Res (2009) 1.25
The John Insall Award: unicompartmental knee replacement: a minimum twenty-one-year followup, end-result study. Clin Orthop Relat Res (2005) 1.23
Long-term function after Charnley total hip arthroplasty. Clin Orthop Relat Res (2003) 1.22
Phase II study of capecitabine (Xeloda) and concomitant boost radiotherapy in patients with locally advanced rectal cancer. Int J Radiat Oncol Biol Phys (2006) 1.21
Cartilage thickness in cadaveric ankles: measurement with double-contrast multi-detector row CT arthrography versus MR imaging. Radiology (2004) 1.20
Contribution of articular surface geometry to ankle stabilization. J Bone Joint Surg Am (2006) 1.19
Twenty-five-year results after Charnley total hip arthroplasty in patients less than fifty years old: a concise follow-up of a previous report. J Bone Joint Surg Am (2003) 1.19
Articular fractures. J Am Acad Orthop Surg (2004) 1.18
Physical validation of a patient-specific contact finite element model of the ankle. J Biomech (2007) 1.17
Is elevated contact stress predictive of post-traumatic osteoarthritis for imprecisely reduced tibial plafond fractures? J Orthop Res (2011) 1.17
Incidence of and risk factors for 30-day readmission following elective primary total joint arthroplasty: analysis from the ACS-NSQIP. J Arthroplasty (2013) 1.17
Effect of different types of smoking and synergism with hepatitis C virus on risk of hepatocellular carcinoma in American men and women: case-control study. Int J Cancer (2008) 1.16
Incongruity versus instability in the etiology of posttraumatic arthritis. Clin Orthop Relat Res (2004) 1.15
Cementless total hip arthroplasty in patients fifty years of age or younger: a minimum ten-year follow-up. J Bone Joint Surg Am (2012) 1.14
Results of porous-coated anatomic total hip arthroplasty without cement at fifteen years: a concise follow-up of a previous report. J Bone Joint Surg Am (2003) 1.12
Quantification of the effect of cross-shear on the wear of conventional and highly cross-linked UHMWPE. J Biomech (2007) 1.12
Salvage of a recurrently dislocating total hip prosthesis with use of a constrained acetabular component. A concise follow-up of a previous report. J Bone Joint Surg Am (2004) 1.12
Use of constrained acetabular components for hip instability: an average 10-year follow-up study. J Arthroplasty (2003) 1.10
Effects of acetabular component orientation on dislocation propensity for small-head-size total hip arthroplasty. Clin Biomech (Bristol, Avon) (2002) 1.10
Intrapelvic migration of the trial femoral head during total hip arthroplasty: is retrieval necessary? A report of four cases. Iowa Orthop J (2006) 1.09
A simulation trainer for complex articular fracture surgery. J Bone Joint Surg Am (2013) 1.09
Thalidomide in the treatment of patients with hepatocellular carcinoma: a phase II trial. Cancer (2005) 1.09
Ankle alignment on lateral radiographs. Part 1: sensitivity of measures to perturbations of ankle positioning. Foot Ankle Int (2006) 1.09
The burden of hip osteoarthritis in the United States: epidemiologic and economic considerations. J Am Acad Orthop Surg (2013) 1.08
Results of Charnley total hip arthroplasty with use of improved femoral cementing techniques. a concise follow-up, at a minimum of twenty-five years, of a previous report. J Bone Joint Surg Am (2006) 1.08
Interfragmentary surface area as an index of comminution energy: proof of concept in a bone fracture surrogate. J Biomech (2002) 1.08
Comorbidities in patients undergoing total knee arthroplasty: do they influence hospital costs and length of stay? Clin Orthop Relat Res (2014) 1.07
Kinematic and contact stress analysis of posterior malleolus fractures of the ankle. J Orthop Trauma (2004) 1.06
Cartilage contact pressure elevations in dysplastic hips: a chronic overload model. J Orthop Surg Res (2006) 1.06
Wear and lysis is the problem in modular TKA in the young OA patient at 10 years. Clin Orthop Relat Res (2011) 1.06
Staggered bilateral total knee arthroplasty performed four to seven days apart during a single hospitalization. J Bone Joint Surg Am (2005) 1.06
Hard-on-hard total hip impingement causes extreme contact stress concentrations. Clin Orthop Relat Res (2011) 1.05
Intra-articular contact stress distributions at the ankle throughout stance phase-patient-specific finite element analysis as a metric of degeneration propensity. Biomech Model Mechanobiol (2006) 1.04
Morbid obesity may increase dislocation in total hip patients: a biomechanical analysis. Clin Orthop Relat Res (2012) 1.04
Incongruity-dependent changes of contact stress rates in human cadaveric ankles. J Orthop Trauma (2006) 1.02
Function and fixation of total hip arthroplasty in patients 25 years of age or younger. Clin Orthop Relat Res (2010) 1.01
Variation of Medicare payments for total knee arthroplasty. J Arthroplasty (2013) 1.01
Functional outcome after revision hip arthroplasty: a metaanalysis. Clin Orthop Relat Res (2003) 1.00
A method for the estimation of normative bone surface area to aid in objective CT-based fracture severity assessment. Iowa Orthop J (2008) 1.00
The pathomechanical etiology of post-traumatic osteoarthritis following intraarticular fractures. Iowa Orthop J (2011) 1.00
Instability dependency of osteoarthritis development in a rabbit model of graded anterior cruciate ligament transection. J Bone Joint Surg Am (2011) 1.00
Automated objective scoring of histologically apparent cartilage degeneration using a custom image analysis program. J Orthop Res (2009) 0.99
Local head roughening as a factor contributing to variability of total hip wear: a finite element analysis. J Biomech Eng (2002) 0.98