Published in Bone Joint Res on March 01, 2014
Early failure of metal-on-metal bearings in hip resurfacing and large-diameter total hip replacement: A consequence of excess wear. J Bone Joint Surg Br (2010) 4.04
Accelerating failure rate of the ASR total hip replacement. J Bone Joint Surg Br (2011) 3.47
Adverse reaction to metal debris following hip resurfacing: the influence of component type, orientation and volumetric wear. J Bone Joint Surg Br (2011) 2.47
Metal wear particle characterization from metal on metal total hip replacements: transmission electron microscopy study of periprosthetic tissues and isolated particles. J Biomed Mater Res (1998) 1.75
The painful metal-on-metal hip resurfacing. J Bone Joint Surg Br (2009) 1.72
Cobalt toxicity after McKee hip arthroplasty. J Bone Joint Surg Br (1975) 1.68
Modes of implant failure after hip resurfacing: morphological and wear analysis of 267 retrieval specimens. J Bone Joint Surg Am (2008) 1.57
In vivo wear of three types of metal on metal hip prostheses during two decades of use. Clin Orthop Relat Res (1996) 1.29
Long-duration metal-on-metal total hip arthroplasties with low wear of the articulating surfaces. J Arthroplasty (1996) 1.27
Transfer of metallic debris after dislocation of ceramic femoral heads in hip prostheses. Arch Orthop Trauma Surg (2006) 1.21
Third-body wear of highly cross-linked polyethylene in a hip simulator. J Arthroplasty (2003) 1.14
Factors correlating with long term survival of McKee-Farrar total hip prostheses. Clin Orthop Relat Res (1996) 1.10
Effect of bearing size on the long-term wear, wear debris, and ion levels of large diameter metal-on-metal hip replacements-An in vitro study. J Biomed Mater Res B Appl Biomater (2008) 1.09
Abrasive wear of ceramic, metal, and UHMWPE bearing surfaces from third-body bone, PMMA bone cement, and titanium debris. Biomed Mater Eng (1994) 1.05
Edge loading in metal-on-metal hips: low clearance is a new risk factor. Proc Inst Mech Eng H (2012) 1.03
The influence of bone and bone cement debris on counterface roughness in sliding wear tests of ultra-high molecular weight polyethylene on stainless steel. Proc Inst Mech Eng H (1990) 0.96
The significance of metal staining on alumina femoral heads in total hip arthroplasty. J Arthroplasty (2007) 0.95
Cracking and impingement in ultra-high-molecular-weight polyethylene acetabular liners. J Arthroplasty (2005) 0.94
Surface damage after multiple dislocations of a 38-mm-diameter, metal-on-metal hip prosthesis. J Arthroplasty (2008) 0.93
Impingement contributes to backside wear and screw-metallic shell fretting in modular acetabular cups. J Arthroplasty (2007) 0.92
Surface Roughness of CoCr and ZrO(2) Femoral Heads with Metal Transfer: A Retrieval and Wear Simulator Study. Int J Biomater (2009) 0.91
Current concepts of metal-on-metal hip resurfacing. Orthop Clin North Am (2005) 0.90
Third-body wear testing of a highly cross-linked acetabular liner: the effect of large femoral head size in the presence of particulate poly(methyl-methacrylate) debris. J Arthroplasty (2005) 0.90
Effects of episodic subluxation events on third body ingress and embedment in the THA bearing surface. J Biomech (2008) 0.88
Cup-neck impingement due to the malposition of the implant as a possible mechanism for metallosis in metal-on-metal total hip arthroplasty. Orthopedics (2008) 0.88
In vivo wear rate of the Birmingham Hip Resurfacing arthroplasty. A review of 10 retrieved components. J Arthroplasty (2008) 0.88
Autopsy analysis thirty years after metal-on-metal total hip replacement. A case report. J Bone Joint Surg Am (2003) 0.86
The long-term wear of retrieved McKee-Farrar metal-on-metal total hip prostheses. J Arthroplasty (2005) 0.86
In vivo evaluation of edge-loading in metal-on-metal hip resurfacing patients with pseudotumours. Bone Joint Res (2012) 0.85
Third-body wear of cobalt-chromium-molybdenum implant alloys initiated by bone and poly(methyl methacrylate) particles. J Biomed Mater Res (2000) 0.81
Risk of impingement and third-body abrasion with 28-mm metal-on-metal bearings. Clin Orthop Relat Res (2014) 0.79
What is a "normal" wear pattern for metal-on-metal hip bearings? J Biomed Mater Res B Appl Biomater (2009) 0.79
Profiling the third-body wear damage produced in CoCr surfaces by bone cement, CoCr, and Ti6Al4V debris: a 10-cycle metal-on-metal simulator test. Proc Inst Mech Eng H (2014) 0.77