Published in J Appl Oral Sci on February 01, 2007
Titanium for prosthodontic applications: a review of the literature. Quintessence Int (1996) 1.27
Layered structure of cast titanium surface. Dent Mater J (1989) 1.17
Dental implant materials. I. Some effects of preparative procedures on surface topography. J Biomed Mater Res (1991) 1.07
A simple method for inspection of porosity in titanium castings. J Prosthet Dent (1993) 1.00
Studies of Ti alloys for dental castings. Dent Mater (1989) 0.90
The effect of investment type on the fit of cast titanium crowns. Aust Dent J (1994) 0.84
The use of implant-supported ceramometal titanium prostheses following sinus lift and augmentation procedures: a clinical report. Int J Oral Maxillofac Implants (1998) 0.83
Evaluation of an improved centrifugal casting machine. J Prosthet Dent (1985) 0.82
Effect of magnesia investments in the dental casting of pure titanium or titanium alloys. Dent Mater J (1982) 0.82
Castability and surface hardness of titanium cast plates obtained from experimental phosphate-bonded silica investment molds. Dent Mater J (1993) 0.80
[High temperature reactivity between titanium and refractory oxides in dental casting procedure. Fundamental study on refractoriness of investments and ceramo-metal bonding by analytical SEM and oxide single crystals]. Shika Zairyo Kikai (1989) 0.80
Shear bond strength of metal-ceramic repair systems. J Prosthet Dent (2006) 0.97
Fracture resistance of weakened roots restored with composite resin and glass fiber post. Braz Dent J (2008) 0.94
Influence of the remaining coronal structure on the resistance of teeth with intraradicular retainer. Braz Dent J (2006) 0.94
Accuracy of stone casts obtained by different impression materials. Braz Oral Res (2009) 0.92
Microleakage into and from two-stage implants: an in vitro comparative study. Int J Oral Maxillofac Implants (2011) 0.92
Effect of metal primers on bond strength of resin cements to base metals. J Prosthet Dent (2009) 0.91
Fracture resistance of the implant-abutment connection in implants with internal hex and internal conical connections under oblique compressive loading: an in vitro study. Int J Prosthodont (2009) 0.91
Implant/abutment vertical misfit of one-piece cast frameworks made with different materials. Braz Dent J (2010) 0.89
Retention and stress distribution in distal extension removable partial dentures with and without implant association. J Prosthodont Res (2012) 0.89
Comparative study of circumferential clasp retention force for titanium and cobalt-chromium removable partial dentures. J Prosthet Dent (2002) 0.89
In vitro comparative analysis of the fit of gold alloy or commercially pure titanium implant-supported prostheses before and after electroerosion. J Prosthet Dent (2004) 0.87
Bacterial adhesion on the titanium and zirconia abutment surfaces. Clin Oral Implants Res (2013) 0.87
Tensile bond strength of glass fiber posts luted with different cements. Braz Oral Res (2007) 0.87
Fracture strength of teeth with flared root canals restored with glass fibre posts. Int Dent J (2007) 0.86
Endodontically treated teeth: characteristics and considerations to restore them. J Prosthodont Res (2010) 0.86
Effect of whitening toothpaste on titanium and titanium alloy surfaces. Braz Oral Res (2012) 0.85
Leakage of saliva through the implant-abutment interface: in vitro evaluation of three different implant connections under unloaded and loaded conditions. Int J Oral Maxillofac Implants (2012) 0.84
Torque removal evaluation of prosthetic screws after tightening and loosening cycles: an in vitro study. Clin Oral Implants Res (2011) 0.84
Compressive strength and compressive fatigue limit of conventional and high viscosity posterior resin composites. Braz Oral Res (2006) 0.84
An alternative section method for casting and posterior laser welding of metallic frameworks for an implant-supported prosthesis. J Prosthodont (2008) 0.83
Comparative analysis of the fit of 3-unit implant-supported frameworks cast in nickel-chromium and cobalt-chromium alloys and commercially pure titanium after casting, laser welding, and simulated porcelain firings. Int J Prosthodont (2008) 0.83
Clinical evaluation of interocclusal recording materials in bilateral free end cases. Braz Dent J (2005) 0.82
Three-dimensional image contribution for evaluation of operative procedural errors in endodontic therapy and dental implants. Braz Dent J (2012) 0.82
Effect of temperature variation on the cytotoxicity of cast dental alloys and commercially pure titanium. J Appl Oral Sci (2009) 0.81
Abrasion wear resistance of different artificial teeth opposed to metal and composite antagonists. J Appl Oral Sci (2009) 0.81
Diametral tensile strength of dual-curing resin cements submitted exclusively to autopolymerization. Quintessence Int (2007) 0.81
Retention force of T-bar clasps for titanium and cobalt-chromium removable partial dentures. Braz Dent J (2008) 0.80
Wear resistance of experimental titanium alloys for dental applications. J Mech Behav Biomed Mater (2011) 0.80
The influence of chemical activation on hardness of dual-curing resin cements. Braz Oral Res (2004) 0.80
Comparative study of two commercially pure titanium casting methods. J Appl Oral Sci (2010) 0.80
The effects of different loading times on the bone response around dental implants: a histomorphometric study in dogs. Int J Oral Maxillofac Implants (2010) 0.79
Vickers hardness of cast commercially pure titanium and Ti-6Al-4V alloy submitted to heat treatments. Braz Dent J (2006) 0.79
Thermo and mechanical cycling and veneering method do not influence Y-TZP core/veneer interface bond strength. J Dent (2012) 0.79
Shear bond strength of metal-ceramic repair systems. Gen Dent (2009) 0.79
Influence of microwave sterilization on the cutting capacity of carbide burs. J Appl Oral Sci (2009) 0.79
Influence of activation modes on diametral tensile strength of dual-curing resin cements. Braz Oral Res (2006) 0.79
Effect of fluoride-containing solutions on the surface of cast commercially pure titanium. Braz Dent J (2009) 0.79
Efficacy of air-abrasion technique and additional surface treatment at titanium/resin cement interface. J Adhes Dent (2012) 0.79
Tensile bond strength of cast commercially pure titanium and cast gold-alloy posts and cores cemented with two luting agents. J Prosthet Dent (2008) 0.79
Internal adaptation of cast titanium crowns. J Appl Oral Sci (2007) 0.79
The effect of commercially pure titanium and alternative dental alloys on the marginal fit of one-piece cast implant frameworks. J Dent (2007) 0.79
Surgical crown lengthening: a 12-month study - radiographic results. J Appl Oral Sci (2007) 0.78
Digital image correlation analysis on the influence of crown material in implant-supported prostheses on bone strain distribution. J Prosthodont Res (2012) 0.78
Effect of cyclic compressive loading on the bond strength of an adhesive system to dentin after collagen removal. J Adhes Dent (2005) 0.78
Comparative study of ceramic-to-metal bonding. Braz Dent J (2007) 0.78
Analysis of the relationship between the surface hardness and wear resistance of indirect composites used as veneer materials. Braz Dent J (2007) 0.78
An in vitro study of non-axial forces upon the retention of an O-ring attachment. Clin Oral Implants Res (2009) 0.78
Relation between implant/abutment vertical misfit and torque loss of abutment screws. Braz Dent J (2008) 0.78
Evaluation of the adaptation interface of one-piece implant-supported superstructures obtained in Ni-Cr-Ti and Pd-Ag alloys. Braz Dent J (2004) 0.78
Photoelastic stress analysis of different designs of cement-retained fixed partial dentures on Morse taper oral implants. J Craniofac Surg (2011) 0.78
Effect of laser welding on the titanium composite tensile bond strength. Braz Dent J (2009) 0.78
Comparative study of chemical and mechanical retentive systems for bonding of indirect composite resin to commercially pure titanium. Braz Dent J (2008) 0.78
Fracture resistance and failure pattern of teeth submitted to internal bleaching with 37% carbamide peroxide, with application of different restorative procedures. J Appl Oral Sci (2006) 0.77
Three-dimensional finite element analysis of stress distribution on different bony ridges with different lengths of morse taper implants and prosthesis dimensions. J Craniofac Surg (2012) 0.77
Effect of different investments and mold temperatures on titanium mechanical properties. J Prosthodont Res (2011) 0.77
The influence of short-heating-cycle investments on the quality of commercially pure titanium castings. J Prosthet Dent (2010) 0.77
The effect of different surface treatments on the shear bond strength of luting cements to titanium. J Prosthet Dent (2012) 0.77
Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique. Braz Dent J (2005) 0.77
Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study. Clin Oral Implants Res (2009) 0.77
Gingival recession in individuals with cleft lip and palate: prevalence and severity. Cleft Palate Craniofac J (2011) 0.77
Effect of surface treatments on the bond strength of a resin cement to commercially pure titanium. Braz Dent J (2010) 0.76
Oral biofilm formation on the titanium and zirconia substrates. Microsc Res Tech (2012) 0.76
Mechanical analysis of conventional and small diameter conical implant abutments. J Adv Prosthodont (2012) 0.75
Importance of a distal proximal contact on load transfer by implant-supported single adjacent crowns in posterior region of the mandible: a photoelastic study. J Appl Oral Sci (2013) 0.75
Prosthetic misfit of implant-supported prosthesis obtained by an alternative section method. J Adv Prosthodont (2012) 0.75
In vivo evaluation of Candida spp. adhesion on titanium or zirconia abutment surfaces. Arch Oral Biol (2013) 0.75
Assessment of the prevalence index on signs of combination syndrome in patients treated at Bauru School of Dentistry, University of Sao Paulo. J Appl Oral Sci (2007) 0.75
Effect of laser welding on the titanium ceramic tensile bond strength. J Appl Oral Sci (2011) 0.75
Torque loss under mechanical cycling of long-span zirconia and titanium-cemented and screw-retained implant-supported CAD/CAM frameworks. Clin Oral Implants Res (2014) 0.75
Correlation between vertical misfits and stresses over implants from castable frameworks made of different alloys. J Craniofac Surg (2014) 0.75
Effects of chemical composition on the corrosion of dental alloys. Braz Dent J (2012) 0.75
Effect of thermal treatments on tensile strength of commercially cast pure titanium and Ti-6Al-4V alloys. J Mater Sci Mater Med (2005) 0.75
Effect of phosphate-bonded investments on titanium reaction layer and crown fit. Braz Oral Res (2010) 0.75
Improvement to the marginal coping fit of commercially pure titanium cast in phosphate-bonded investment by using a simple pattern coating technique. J Prosthet Dent (2012) 0.75
Shear bond strength of different repair systems to titanium after water aging. Oper Dent (2012) 0.75
Loss of preload in screwed implant joints as a function of time and tightening/untightening sequences. Int J Oral Maxillofac Implants (2014) 0.75
Correlation between vertical misfits and stresses transmitted to implants from metal frameworks. J Biomech (2011) 0.75
Clinical fractures of veneered zirconia single crowns. Gen Dent (2013) 0.75
A Three-Dimensional Finite Element Analysis of the Stress Distribution Generated by Splinted and Nonsplinted Prostheses in the Rehabilitation of Various Bony Ridges with Regular or Short Morse Taper Implants. Int J Oral Maxillofac Implants (2017) 0.75
Three-dimensional finite element analysis of the stress distribution on morse taper implants surface. J Prosthodont Res (2013) 0.75
Microleakage at Different Implant-Abutment Connections Under Unloaded and Loaded Conditions. Implant Dent (2017) 0.75
Torque Loss of Different Abutment Sizes Before and After Cyclic Loading. Int J Oral Maxillofac Implants (2015) 0.75
Mechanical comparison of experimental conical-head abutment screws with conventional flat-head abutment screws for external-hex and internal tri-channel implant connections: an in vitro evaluation of loosening torque. Int J Oral Maxillofac Implants (2013) 0.75
Tensile bond strength of cast commercially pure titanium dowel and cores cemented with three luting agents. J Prosthodont Res (2010) 0.75
Tensile resistance of mineralized and demineralized rat bones in different regions (calvarial and femur). J Oral Implantol (2011) 0.75
The effect of coating patterns with spinel-based investment on the castability and porosity of titanium cast into three phosphate-bonded investments. J Prosthodont (2010) 0.75
Stress Over Implants of One-Piece Cast Frameworks Made With Different Materials. J Craniofac Surg (2016) 0.75
Effect of acetyl resin retentive arms on the retentive force of circumferential clasps: an in vitro study. J Prosthodont Res (2011) 0.75
The effect of mold temperature on castability of CP Ti and Ti-6Al-4V castings into phosphate bonded investment materials. Dent Mater (2006) 0.75
Effect of fluoride sodium mouthwash solutions on cpTI: evaluation of physicochemical properties. Braz Dent J (2012) 0.75
Photoelastic analysis of stresses transmitted by universal cast to long abutment on implant-supported single restorations under static occlusal loads. J Craniofac Surg (2012) 0.75
Effect of metal conditioners on the adhesive bonding of resin cements to cast titanium. Quintessence Int (2007) 0.75
Evaluation of screw loosening on new abutment screws and after successive tightening. Braz Dent J (2011) 0.75
Impact of temperature and time storage on the microbial detection of oral samples by Checkerboard DNA-DNA hybridization method. Arch Oral Biol (2013) 0.75
An alternative and simplified technique for the impression of completely edentulous ridges. Gen Dent (2008) 0.75