Published in J Arthroplasty on October 22, 2013
Last decade in THA: unsettling and disappointing. J Arthroplasty (2013) 2.06
Response to William Harris' editorial: Last decade in THA: unsettling and disappointing. J Arthroplasty (2013) 1.08
The etiology of osteoarthritis of the hip: an integrated mechanical concept. Clin Orthop Relat Res (2008) 4.63
Rates and outcomes of primary and revision total hip replacement in the United States medicare population. J Bone Joint Surg Am (2003) 4.38
Optimal low-density lipoprotein is 50 to 70 mg/dl: lower is better and physiologically normal. J Am Coll Cardiol (2004) 4.07
Incidence rates of dislocation, pulmonary embolism, and deep infection during the first six months after elective total hip replacement. J Bone Joint Surg Am (2003) 3.33
Association of hospital and surgeon volume of total hip replacement with functional status and satisfaction three years following surgery. Arthritis Rheum (2003) 2.98
Range of motion and stability in total hip arthroplasty with 28-, 32-, 38-, and 44-mm femoral head sizes. J Arthroplasty (2005) 1.85
A new paradigm, a follow-up letter to the editor of the journal of arthroplasty. J Arthroplasty (2014) 1.40
Effect of radiation, heat, and aging on in vitro wear resistance of polyethylene. Clin Orthop Relat Res (2003) 1.39
Characterization of irradiated blends of alpha-tocopherol and UHMWPE. Biomaterials (2005) 1.38
Large diameter femoral heads on highly cross-linked polyethylene: minimum 3-year results. Clin Orthop Relat Res (2006) 1.33
Experimental assessment of precision and accuracy of radiostereometric analysis for the determination of polyethylene wear in a total hip replacement model. J Orthop Res (2002) 1.32
In vivo oxidation of retrieved cross-linked ultra-high-molecular-weight polyethylene acetabular components with residual free radicals. J Arthroplasty (2006) 1.30
Radiostereometric analysis comparison of wear of highly cross-linked polyethylene against 36- vs 28-mm femoral heads. J Arthroplasty (2007) 1.29
The next critical role of orthopedic registries. Acta Orthop (2015) 1.23
Analysis of long-term cemented total hip arthroplasty retrievals. Clin Orthop Relat Res (2002) 1.20
Alternative materials to improve total hip replacement tribology. Acta Orthop Scand (2003) 1.18
Femoral head sizes larger than 32 mm against highly cross-linked polyethylene. Clin Orthop Relat Res (2002) 1.15
Third-body wear of highly cross-linked polyethylene in a hip simulator. J Arthroplasty (2003) 1.14
High placement of noncemented acetabular components in revision total hip arthroplasty. A concise follow-up, at a minimum of fifteen years, of a previous report. J Bone Joint Surg Am (2006) 1.14
Comparison of femoral head penetration using RSA and the Martell method. Clin Orthop Relat Res (2006) 1.12
Minimum 6-year followup of highly cross-linked polyethylene in THA. Clin Orthop Relat Res (2007) 1.11
Knee-simulator testing of conventional and cross-linked polyethylene tibial inserts. J Arthroplasty (2004) 1.10
Simulated normal gait wear testing of a highly cross-linked polyethylene tibial insert. J Arthroplasty (2007) 1.10
The effect of real-time aging on the oxidation and wear of highly cross-linked UHMWPE acetabular liners. Biomaterials (2005) 1.06
Surface analysis of early retrieved acetabular polyethylene liners: a comparison of conventional and highly crosslinked polyethylenes. J Arthroplasty (2004) 1.06
Steady-state penetration rates of electron beam-irradiated, highly cross-linked polyethylene at an average 45-month follow-up. J Arthroplasty (2006) 1.03
Optical analysis of surface changes on early retrievals of highly cross-linked and conventional polyethylene tibial inserts. J Arthroplasty (2003) 0.99
Aggressive wear testing of a cross-linked polyethylene in total knee arthroplasty. Clin Orthop Relat Res (2002) 0.96
Stress fracture of the medial wall of the acetabulum adjacent to a cementless acetabular component. J Arthroplasty (2002) 0.95
Isolated acetabular revision through the posterior approach: short-term results after revision of a recalled acetabular component. J Arthroplasty (2005) 0.95
The efficacy of BMP-2 to induce bone ingrowth in a total hip replacement model. Clin Orthop Relat Res (2003) 0.95
Comparison of two digital radiostereometric analysis methods in the determination of femoral head penetration in a total hip replacement phantom. J Orthop Res (2004) 0.94
Metrology to quantify wear and creep of polyethylene tibial knee inserts. Clin Orthop Relat Res (2003) 0.94
Knee simulator wear of polyethylene tibias articulating against explanted rough femoral components. Clin Orthop Relat Res (2004) 0.94
The measurement of creep in ultrahigh molecular weight polyethylene: a comparison of conventional versus highly cross-linked polyethylene. J Arthroplasty (2005) 0.93
Effects of femoral neck length, stem size, and body weight on strains in the proximal cement mantle. J Bone Joint Surg Am (2002) 0.91
Gradient crosslinking of UHMWPE using irradiation in molten state for total joint arthroplasty. Biomaterials (2002) 0.91
Comparison of hip simulator wear of 2 different highly cross-linked ultra high molecular weight polyethylene acetabular components using both 32- and 38-mm femoral heads. J Arthroplasty (2007) 0.90
Third-body wear testing of a highly cross-linked acetabular liner: the effect of large femoral head size in the presence of particulate poly(methyl-methacrylate) debris. J Arthroplasty (2005) 0.90
Standing versus supine radiographs in RSA evaluation of femoral head penetration. Clin Orthop Relat Res (2006) 0.90
Ex vivo wear of conventional and cross-linked polyethylene acetabular liners. Clin Orthop Relat Res (2005) 0.89
Effect of lipid absorption on wear and compressive properties of unirradiated and highly crosslinked UHMWPE: an in vitro experimental model. Biomaterials (2004) 0.89
Polyethylene damage in total knees and use of highly crosslinked polyethylene. J Bone Joint Surg Am (2003) 0.89
The high hip center. Clin Orthop Relat Res (2004) 0.89
Effect of consolidation on adhesive and abrasive wear of ultra high molecular weight polyethylene. Biomaterials (2003) 0.86
Biologic fixation of total hip implants. Insights gained from a series of canine studies. J Bone Joint Surg Am (2004) 0.86
Contact stress assessment of conventional and highly crosslinked ultra high molecular weight polyethylene acetabular liners with finite element analysis and pressure sensitive film. J Biomed Mater Res B Appl Biomater (2007) 0.85
Revision of failed acetabular components with use of so-called jumbo noncemented components. A concise follow-up of a previous report. J Bone Joint Surg Am (2006) 0.85
Cementless acetabular revision with the Harris-Galante porous prosthesis. Results after a minimum of ten years of follow-up. J Bone Joint Surg Am (2004) 0.84
A new approach for the Martell 3-D method of measuring polyethylene wear without requiring the cross-table lateral films. J Orthop Res (2005) 0.82
The effect of surface finish and of vertical ribs on the stability of a cemented femoral stem: an in vitro stair climbing test. J Arthroplasty (2006) 0.82
Binding of radiolabeled porcine motilin and erythromycin lactobionate to smooth muscle membranes in various segments of the equine gastrointestinal tract. Am J Vet Res (2002) 0.82
Effect of oral alendronate on net bone ingrowth into canine cementless total hips. J Arthroplasty (2005) 0.79
Isolated acetabular revision with use of the Harris-Galante Cementless Component. Study with intermediate-term follow-up. J Bone Joint Surg Am (2004) 0.79
Primary cementless acetabular components in hips with severe developmental dysplasia or total dislocation. A concise follow-up, at an average of sixteen years, of a previous report. J Bone Joint Surg Am (2006) 0.78
Mode of loosening of matt-finished femoral stems in primary total hip replacement. Saudi Med J (2002) 0.75
Polished vs rough femoral components in grade A and grade C-2 cement mantles. J Arthroplasty (2006) 0.75
The use of trans-vinylene formation in quantifying the spatial distribution of electron beam penetration in polyethylene. Single-sided, double-sided and shielded irradiation. Biomaterials (2003) 0.75