Published in Acta Odontol Scand on January 01, 1978
The effect of temperature on compressive and tensile strengths of commonly used luting cements: an in vitro study. J Int Oral Health (2015) 0.77
A castor oil-containing dental luting agent: effects of cyclic loading and storage time on flexural strength. J Appl Oral Sci (2015) 0.75
Effects of polymerization contraction on interface's microTBS of luting material and dentin. Clin Oral Investig (2009) 0.75
The fit of metal-ceramic crowns, a clinical study. Dent Mater (1985) 1.06
Wear resistance of some prosthodontic materials in vivo. Acta Odontol Scand (1993) 0.92
Occlusal contact wear of prosthodontic materials. An in vivo study. Acta Odontol Scand (1988) 0.91
The suitability of a new index for the evaluation of dental wear. Acta Odontol Scand (1989) 0.83
In vivo wear ranking of some restorative materials. Quintessence Int (1994) 0.83
The influence of surface roughness on the retentive ability of two dental luting cements. J Oral Rehabil (1978) 0.83
The effect of early water contact on glass-ionomer cements. Quintessence Int (1992) 0.81
In vitro shear bond strength of two resin composites to dentin with five different dentin adhesives. Quintessence Int (1998) 0.80
Retentive properties of luting cements: an in vitro investigation. Dent Mater (1986) 0.80
A novel miniature bite force recorder and its clinical application. Acta Odontol Scand (1982) 0.79
Bond strength of porcelain to dental alloys - an evaluation of two test methods. Scand J Dent Res (1981) 0.79
Adaption of luting cement to enamel, dentin and restorative material. Acta Odontol Scand (1978) 0.78
Early erosion of dental cements. Scand J Dent Res (1984) 0.78
Dental casting alloys with a low content of noble metals: physical properties. Acta Odontol Scand (1983) 0.78
Characterization of glass ionomer filling materials. Dent Mater (1988) 0.77
Film thickness of dental luting cements. Dent Mater (1986) 0.76
Effect of bevelling on the occurrence of fractures in the enamel surrounding composite resin fillings. J Oral Rehabil (1977) 0.76
Wear of prosthodontic materials--an in vivo study. J Oral Rehabil (1990) 0.76
Oxidation of noble metal alloys for porcelain veneer crowns. Acta Odontol Scand (1979) 0.76
A bend test for measuring cement-dentin bond. Dent Mater (1988) 0.75
Microstructure and chemical composition of noble alloys for porcelain veneering. Swed Dent J (1978) 0.75
[Compressive strength and deformation of dental cements]. Nor Tannlaegeforen Tid (1978) 0.75
The extent of slits at the interfaces between luting cements and enamel, dentin and alloy. Acta Odontol Scand (1978) 0.75
[A new acceptance program for alloys used in metal-ceramic restorations]. Tandlakartidningen (1985) 0.75
Abrasives in snuff? Acta Odontol Scand (1989) 0.75
Assessment of variables in clinical studies of amalgam restorations. J Dent Res (1980) 0.75
[New materials and dental ethics]. Nor Tannlaegeforen Tid (1976) 0.75
Linear dimensional change during setting of a zinc phosphate cement. A methodological study. J Oral Rehabil (1975) 0.75
The temperature of cement specimens and its influence on measured strength. Dent Mater (1985) 0.75
[Precision casting. A comparative study of 17 MK-alloys]. Tandteknikern (1984) 0.75
[Creep and one hour strength of dental amalgams]. Nor Tannlaegeforen Tid (1977) 0.75
[Alloys with low content of precious metals]. Tandlakartidningen (1982) 0.75
[NIOM--news, study of the content of Cd and Ni in dental gold alloys]. Tandlakartidningen (1976) 0.75
In vitro corrosion of dental amalgams with different Cu content. Scand J Dent Res (1977) 0.75
[Microleakage]. Nor Tannlaegeforen Tid (1979) 0.75
Corrosion and creep of dental amalgam. J Dent Res (1978) 0.75
Compressive creep of denture base polymers. Acta Odontol Scand (1980) 0.75
Correlation between strength and hardness of dental casting gold alloys. Scand J Dent Res (1977) 0.75
[Alloys containing low concentration of precious metals]. Tandlaegebladet (1982) 0.75
[Tooth wear among the mentally retarded]. Nor Tannlaegeforen Tid (1986) 0.75
Properties of amalgams made from lathe-cut, high Cu amalgam alloys. Acta Odontol Scand (1980) 0.75
Bond strength of new ionomer cements to dentin. Scand J Dent Res (1981) 0.75
[New dental cements, especially for permanent restorations]. Nor Tannlaegeforen Tid (1970) 0.75
Methods for evaluation of working and setting times of periodontal dressings. Acta Odontol Scand (1979) 0.75
Fracture toughness measurements of some dental core ceramics: a methodologic study. Scand J Dent Res (1991) 0.75
[Leakage and one-hour strength of dental amalgams]. Tandlakartidningen (1978) 0.75
Creep of dental amalgam and its phases. Scand J Dent Res (1977) 0.75
Porosities in a dental silver-palladium casting alloy. Acta Odontol Scand (1985) 0.75
Adhesive properties of periodontal dressings--an in vitro study. J Periodontal Res (1979) 0.75
[Glass ionomer cements: review with regard to quality and clinical use]. Nor Tannlaegeforen Tid (1979) 0.75
[New specifications for alloys used in metal-ceramic restorations]. Tandlaegebladet (1986) 0.75
[Amalgam alloys available to dentists in Sweden]. Tandlakartidningen (1984) 0.75
Adaptation of amalgams to cavity walls. J Oral Rehabil (1976) 0.75
[Polishing of porcelain]. Tandteknikern (1983) 0.75
[Cements for crown--brigdework practice]. Nor Tannlaegeforen Tid (1969) 0.75
One-hour compressive strength of dental amalgam. Scand J Dent Res (1975) 0.75
Clinical study of two luting cements used on student-treated patients: final report. Dent Mater (1986) 0.75
Creep and phase transformation in dental amalgam. J Dent Res (1977) 0.75
Effect of trituration on dimensional changes of dental amalgam. Acta Odontol Scand (1977) 0.75
The effect of asbestos-alternatives on the accuracy of cast veneer crowns. Swed Dent J (1982) 0.75
Wear mechanisms of resin and porcelain denture teeth. Acta Odontol Scand (1989) 0.75
The influence of various admixes on the physical properties of a polycarboxylate cement. J Dent Res (1983) 0.75
Sealing and retentive ability of dental luting cements. Acta Odontol Scand (1978) 0.75
Tensile bond strength of maxillofacial adhesives. J Prosthet Dent (1993) 0.75
[Section impression--a technical evaluation of materials]. Nor Tannlaegeforen Tid (1973) 0.75
Linear dimensional changes during setting of two polycarboxylate cements. J Oral Rehabil (1976) 0.75
[Surface treatment of special hard plaster of Paris models]. Nor Tannlaegeforen Tid (1975) 0.75
Mechanical properties of noble alloys for porcelain veneering. Swed Dent J (1978) 0.75
Corrosion of base metal alloys in vitro. Acta Odontol Scand (1978) 0.75
[Loss of mercury during mechanical mixing of alloy and mercury]. Nor Tannlaegeforen Tid (1973) 0.75
[Polishing of porcelain]. Tandlakartidningen (1983) 0.75
Creep of dental amalgam. Scand J Dent Res (1975) 0.75
Tensile bond strength of dentin adhesives. Dent Mater (1986) 0.75
[Retention of crown-bridge prostheses]. Nor Tannlaegeforen Tid (1972) 0.75
[Benefits and disadvantages of using dental restorations with mercury]. Suom Hammaslaakarilehti (1986) 0.75
The structure of dentin surfaces exposed for bond strength measurements. Scand J Dent Res (1993) 0.75
Flow and creep of dental amalgam. Acta Odontol Scand (1975) 0.75
Stress/strain behavior of dental amalgams. Acta Odontol Scand (1978) 0.75
Clinical study of two luting cements used on student-treated patients: an interim report. J Prosthet Dent (1984) 0.75
[Mercury and amalgam--environmental hazards?]. Nor Tannlaegeforen Tid (1980) 0.75
In vitro corrosion of screwposts and amalgam placed in contact. Swed Dent J (1977) 0.75
Adhesive bonding of dental luting cements; influence of surface treatment. Acta Odontol Scand (1978) 0.75
Retentive strength of dental composite to metal surfaces. Acta Odontol Scand (1989) 0.75
Adhesion of polycarboxylate-based dental cements to enamel: an in vivo study. J Dent Res (1986) 0.75
Replica techniques for in vivo studies of tooth surfaces and prosthetic materials. Scand J Dent Res (1985) 0.75
Compressive strength of dental amalgam. Sven Tandlak Tidskr (1975) 0.75
Creep of dental amalgam as a function of heat treatment. Scand J Dent Res (1975) 0.75
[Casting technic and asbestos as lining material]. Tandlaegebladet (1981) 0.75