Published in Acta Odontol Scand on January 01, 1982
Bite force and influential factors on bite force measurements: a literature review. Eur J Dent (2010) 1.06
A three-dimensional finite element analysis of the relationship between masticatory performance and skeletal malocclusion. J Periodontal Implant Sci (2015) 0.78
Efficacy of denture adhesives in maxillary dentures using gnathodynamometry: a comparative study. Odontology (2011) 0.75
The fit of metal-ceramic crowns, a clinical study. Dent Mater (1985) 1.06
In vitro release of nickel and chromium from different types of simulated orthodontic appliances. Angle Orthod (1995) 0.96
Wear resistance of some prosthodontic materials in vivo. Acta Odontol Scand (1993) 0.92
Occlusal contact wear of prosthodontic materials. An in vivo study. Acta Odontol Scand (1988) 0.91
Dimensional stability of elastomeric impression materials in custom-made and stock trays. J Prosthet Dent (1984) 0.87
Assessment of an additive index for plaque accumulation on complete maxillary dentures. Acta Odontol Scand (1982) 0.87
The influence of surface roughness on the retentive ability of two dental luting cements. J Oral Rehabil (1978) 0.83
In vivo wear ranking of some restorative materials. Quintessence Int (1994) 0.83
The suitability of a new index for the evaluation of dental wear. Acta Odontol Scand (1989) 0.83
Stress/strain behavior of some dental luting cements. Acta Odontol Scand (1978) 0.81
The effect of early water contact on glass-ionomer cements. Quintessence Int (1992) 0.81
In vitro shear bond strength of two resin composites to dentin with five different dentin adhesives. Quintessence Int (1998) 0.80
Retentive properties of luting cements: an in vitro investigation. Dent Mater (1986) 0.80
Bond strength of luting materials to ceramic crowns after different surface treatments. Eur J Prosthodont Restor Dent (2008) 0.80
Bond strength of porcelain to dental alloys - an evaluation of two test methods. Scand J Dent Res (1981) 0.79
Adaption of luting cement to enamel, dentin and restorative material. Acta Odontol Scand (1978) 0.78
Early erosion of dental cements. Scand J Dent Res (1984) 0.78
Dental casting alloys with a low content of noble metals: physical properties. Acta Odontol Scand (1983) 0.78
A method for testing denture adhesives. J Prosthet Dent (1995) 0.77
Characterization of glass ionomer filling materials. Dent Mater (1988) 0.77
Effect of bevelling on the occurrence of fractures in the enamel surrounding composite resin fillings. J Oral Rehabil (1977) 0.76
Film thickness of dental luting cements. Dent Mater (1986) 0.76
Wear of prosthodontic materials--an in vivo study. J Oral Rehabil (1990) 0.76
Oxidation of noble metal alloys for porcelain veneer crowns. Acta Odontol Scand (1979) 0.76
[Precision casting. A comparative study of 17 MK-alloys]. Tandteknikern (1984) 0.75
Oral status and acceptance of dental services among some elderly persons in Oslo. Acta Odontol Scand (1982) 0.75
[Alloys with low content of precious metals]. Tandlakartidningen (1982) 0.75
[Microleakage]. Nor Tannlaegeforen Tid (1979) 0.75
[Tooth wear among the mentally retarded]. Nor Tannlaegeforen Tid (1986) 0.75
[Alloys containing low concentration of precious metals]. Tandlaegebladet (1982) 0.75
Retention of complete maxillary dentures as a result of changes in design. Acta Odontol Scand (1984) 0.75
Bond strength of new ionomer cements to dentin. Scand J Dent Res (1981) 0.75
[New dental cements, especially for permanent restorations]. Nor Tannlaegeforen Tid (1970) 0.75
Fracture toughness measurements of some dental core ceramics: a methodologic study. Scand J Dent Res (1991) 0.75
Porosities in a dental silver-palladium casting alloy. Acta Odontol Scand (1985) 0.75
[Glass ionomer cements: review with regard to quality and clinical use]. Nor Tannlaegeforen Tid (1979) 0.75
[New specifications for alloys used in metal-ceramic restorations]. Tandlaegebladet (1986) 0.75
[Amalgam alloys available to dentists in Sweden]. Tandlakartidningen (1984) 0.75
Adaptation of amalgams to cavity walls. J Oral Rehabil (1976) 0.75
[Polishing of porcelain]. Tandteknikern (1983) 0.75
[Cements for crown--brigdework practice]. Nor Tannlaegeforen Tid (1969) 0.75
Clinical study of two luting cements used on student-treated patients: final report. Dent Mater (1986) 0.75
Wear mechanisms of resin and porcelain denture teeth. Acta Odontol Scand (1989) 0.75
The effect of asbestos-alternatives on the accuracy of cast veneer crowns. Swed Dent J (1982) 0.75
The influence of various admixes on the physical properties of a polycarboxylate cement. J Dent Res (1983) 0.75
Sealing and retentive ability of dental luting cements. Acta Odontol Scand (1978) 0.75
Tensile bond strength of maxillofacial adhesives. J Prosthet Dent (1993) 0.75
[Section impression--a technical evaluation of materials]. Nor Tannlaegeforen Tid (1973) 0.75
The masseteric reflex evoked by tooth and denture tapping. J Oral Rehabil (1991) 0.75
Linear dimensional changes during setting of two polycarboxylate cements. J Oral Rehabil (1976) 0.75
Retention of complete maxillary dentures measured as resistance against unilateral occlusal loading. Acta Odontol Scand (1984) 0.75
[Surface treatment of special hard plaster of Paris models]. Nor Tannlaegeforen Tid (1975) 0.75
Vestibular and lingual muscular pressure on complete maxillary dentures. Acta Odontol Scand (1986) 0.75
Retention of complete maxillary dentures related to soft tissue function. Acta Odontol Scand (1984) 0.75
[Loss of mercury during mechanical mixing of alloy and mercury]. Nor Tannlaegeforen Tid (1973) 0.75
[Polishing of porcelain]. Tandlakartidningen (1983) 0.75
Tensile bond strength of dentin adhesives. Dent Mater (1986) 0.75
Bonding capacity in bone of HIP-processed HA-coated titanium: mechanical and histological investigations. J Biomed Mater Res (1995) 0.75
[Retention of crown-bridge prostheses]. Nor Tannlaegeforen Tid (1972) 0.75
[Benefits and disadvantages of using dental restorations with mercury]. Suom Hammaslaakarilehti (1986) 0.75
The structure of dentin surfaces exposed for bond strength measurements. Scand J Dent Res (1993) 0.75
Clinical study of two luting cements used on student-treated patients: an interim report. J Prosthet Dent (1984) 0.75
[Mercury and amalgam--environmental hazards?]. Nor Tannlaegeforen Tid (1980) 0.75
Retentive strength of dental composite to metal surfaces. Acta Odontol Scand (1989) 0.75
Pathologic attrition and maximal bite force. J Oral Rehabil (1985) 0.75
Adhesive bonding of dental luting cements; influence of surface treatment. Acta Odontol Scand (1978) 0.75
Adhesion of polycarboxylate-based dental cements to enamel: an in vivo study. J Dent Res (1986) 0.75
Replica techniques for in vivo studies of tooth surfaces and prosthetic materials. Scand J Dent Res (1985) 0.75
[Casting technic and asbestos as lining material]. Tandlaegebladet (1981) 0.75
A bend test for measuring cement-dentin bond. Dent Mater (1988) 0.75
The extent of slits at the interfaces between luting cements and enamel, dentin and alloy. Acta Odontol Scand (1978) 0.75
[Compressive strength and deformation of dental cements]. Nor Tannlaegeforen Tid (1978) 0.75
[A new acceptance program for alloys used in metal-ceramic restorations]. Tandlakartidningen (1985) 0.75
Effects on retention of reducing the palatal coverage of complete maxillary dentures. Acta Odontol Scand (1986) 0.75
Abrasives in snuff? Acta Odontol Scand (1989) 0.75
Linear dimensional change during setting of a zinc phosphate cement. A methodological study. J Oral Rehabil (1975) 0.75
[New materials and dental ethics]. Nor Tannlaegeforen Tid (1976) 0.75
The temperature of cement specimens and its influence on measured strength. Dent Mater (1985) 0.75