Published in Dent Mater on April 01, 1988
The fit of metal-ceramic crowns, a clinical study. Dent Mater (1985) 1.06
Wear resistance of some prosthodontic materials in vivo. Acta Odontol Scand (1993) 0.92
Occlusal contact wear of prosthodontic materials. An in vivo study. Acta Odontol Scand (1988) 0.91
In vivo wear ranking of some restorative materials. Quintessence Int (1994) 0.83
The influence of surface roughness on the retentive ability of two dental luting cements. J Oral Rehabil (1978) 0.83
The suitability of a new index for the evaluation of dental wear. Acta Odontol Scand (1989) 0.83
The effect of early water contact on glass-ionomer cements. Quintessence Int (1992) 0.81
Stress/strain behavior of some dental luting cements. Acta Odontol Scand (1978) 0.81
Retentive properties of luting cements: an in vitro investigation. Dent Mater (1986) 0.80
In vitro shear bond strength of two resin composites to dentin with five different dentin adhesives. Quintessence Int (1998) 0.80
Surface degradation of amalgams in vitro during static and cyclic loading. Scand J Dent Res (1983) 0.80
Bond strength of porcelain to dental alloys - an evaluation of two test methods. Scand J Dent Res (1981) 0.79
A novel miniature bite force recorder and its clinical application. Acta Odontol Scand (1982) 0.79
Adaption of luting cement to enamel, dentin and restorative material. Acta Odontol Scand (1978) 0.78
Early erosion of dental cements. Scand J Dent Res (1984) 0.78
Dental casting alloys with a low content of noble metals: physical properties. Acta Odontol Scand (1983) 0.78
Characterization of glass ionomer filling materials. Dent Mater (1988) 0.77
Effect of bevelling on the occurrence of fractures in the enamel surrounding composite resin fillings. J Oral Rehabil (1977) 0.76
Film thickness of dental luting cements. Dent Mater (1986) 0.76
Wear of prosthodontic materials--an in vivo study. J Oral Rehabil (1990) 0.76
Oxidation of noble metal alloys for porcelain veneer crowns. Acta Odontol Scand (1979) 0.76
[Alloys with low content of precious metals]. Tandlakartidningen (1982) 0.75
[Microleakage]. Nor Tannlaegeforen Tid (1979) 0.75
[Tooth wear among the mentally retarded]. Nor Tannlaegeforen Tid (1986) 0.75
[Alloys containing low concentration of precious metals]. Tandlaegebladet (1982) 0.75
Bond strength of new ionomer cements to dentin. Scand J Dent Res (1981) 0.75
[New dental cements, especially for permanent restorations]. Nor Tannlaegeforen Tid (1970) 0.75
Fracture toughness measurements of some dental core ceramics: a methodologic study. Scand J Dent Res (1991) 0.75
Porosities in a dental silver-palladium casting alloy. Acta Odontol Scand (1985) 0.75
[Glass ionomer cements: review with regard to quality and clinical use]. Nor Tannlaegeforen Tid (1979) 0.75
Initial corrosion of amalgams in vitro. Scand J Dent Res (1984) 0.75
[New specifications for alloys used in metal-ceramic restorations]. Tandlaegebladet (1986) 0.75
[Amalgam alloys available to dentists in Sweden]. Tandlakartidningen (1984) 0.75
Adaptation of amalgams to cavity walls. J Oral Rehabil (1976) 0.75
[Polishing of porcelain]. Tandteknikern (1983) 0.75
[Cements for crown--brigdework practice]. Nor Tannlaegeforen Tid (1969) 0.75
Clinical study of two luting cements used on student-treated patients: final report. Dent Mater (1986) 0.75
Wear mechanisms of resin and porcelain denture teeth. Acta Odontol Scand (1989) 0.75
The effect of asbestos-alternatives on the accuracy of cast veneer crowns. Swed Dent J (1982) 0.75
The influence of various admixes on the physical properties of a polycarboxylate cement. J Dent Res (1983) 0.75
Sealing and retentive ability of dental luting cements. Acta Odontol Scand (1978) 0.75
Tensile bond strength of maxillofacial adhesives. J Prosthet Dent (1993) 0.75
[Section impression--a technical evaluation of materials]. Nor Tannlaegeforen Tid (1973) 0.75
Initial acidity of dental cements. Scand J Dent Res (1984) 0.75
Linear dimensional changes during setting of two polycarboxylate cements. J Oral Rehabil (1976) 0.75
[Surface treatment of special hard plaster of Paris models]. Nor Tannlaegeforen Tid (1975) 0.75
Man's mercury loading from a dental amalgam. Sci Total Environ (1985) 0.75
[Loss of mercury during mechanical mixing of alloy and mercury]. Nor Tannlaegeforen Tid (1973) 0.75
[Polishing of porcelain]. Tandlakartidningen (1983) 0.75
Tensile bond strength of dentin adhesives. Dent Mater (1986) 0.75
[Retention of crown-bridge prostheses]. Nor Tannlaegeforen Tid (1972) 0.75
[Benefits and disadvantages of using dental restorations with mercury]. Suom Hammaslaakarilehti (1986) 0.75
The structure of dentin surfaces exposed for bond strength measurements. Scand J Dent Res (1993) 0.75
Clinical study of two luting cements used on student-treated patients: an interim report. J Prosthet Dent (1984) 0.75
[Mercury and amalgam--environmental hazards?]. Nor Tannlaegeforen Tid (1980) 0.75
Retentive strength of dental composite to metal surfaces. Acta Odontol Scand (1989) 0.75
Adhesive bonding of dental luting cements; influence of surface treatment. Acta Odontol Scand (1978) 0.75
Adhesion of polycarboxylate-based dental cements to enamel: an in vivo study. J Dent Res (1986) 0.75
Replica techniques for in vivo studies of tooth surfaces and prosthetic materials. Scand J Dent Res (1985) 0.75
[Casting technic and asbestos as lining material]. Tandlaegebladet (1981) 0.75
The extent of slits at the interfaces between luting cements and enamel, dentin and alloy. Acta Odontol Scand (1978) 0.75
[Compressive strength and deformation of dental cements]. Nor Tannlaegeforen Tid (1978) 0.75
[A new acceptance program for alloys used in metal-ceramic restorations]. Tandlakartidningen (1985) 0.75
Abrasives in snuff? Acta Odontol Scand (1989) 0.75
Linear dimensional change during setting of a zinc phosphate cement. A methodological study. J Oral Rehabil (1975) 0.75
[New materials and dental ethics]. Nor Tannlaegeforen Tid (1976) 0.75
The temperature of cement specimens and its influence on measured strength. Dent Mater (1985) 0.75
[Precision casting. A comparative study of 17 MK-alloys]. Tandteknikern (1984) 0.75