Published in J Biomed Mater Res on September 01, 1984
The influence of water storage and C-factor on the dentin-resin composite microtensile bond strength and debond pathway utilizing a filled and unfilled adhesive resin. Dent Mater (2001) 1.12
Hardening of dual-cured cements under composite resin inlays. J Prosthet Dent (1991) 1.11
Evaluation of new methods for composite repair. Dent Mater (1992) 1.03
Effect of liners on cusp deflection and gap formation in composite restorations. Oper Dent (2001) 1.01
The contribution of dental amalgam to mercury in blood. J Dent Res (1989) 0.97
The effect of dental amalgams on mercury levels in expired air. J Dent Res (1981) 0.94
Comparative bond strengths of light-cured, heat-cured, and autopolymerizing denture resins to denture teeth. J Prosthet Dent (1989) 0.93
Build-up and repair of light-cured composites: bond strength. J Dent Res (1984) 0.93
Radiopacity of compomers, flowable and conventional resin composites for posterior restorations. Oper Dent (1999) 0.92
Mode of failure in the dentin-adhesive resin-resin composite bonded joint as determined by strength-based (muTBS) and fracture-based (CNSB) mechanical testing. Dent Mater (2001) 0.91
Effect of stepped light intensity on polymerization force and conversion in a photoactivated composite. J Esthet Dent (2000) 0.91
Microtensile bond strength testing and failure analysis of two dentin adhesives. Dent Mater (1998) 0.90
Photo-activation of resin cements through porcelain veneers. J Dent Res (1991) 0.90
Fracture resistance of endodontically prepared teeth using various restorative materials. J Am Dent Assoc (1987) 0.89
Aerobic exercise, maternal self-esteem, and physical discomforts during pregnancy. J Nurse Midwifery (1987) 0.89
Effect of a silane coupling agent on composite repair strengths. Am J Dent (1994) 0.89
Bond strength and failure analysis of light-cured denture resins bonded to denture teeth. J Prosthet Dent (1991) 0.88
Effect of composite type, light intensity, configuration factor and laser polymerization on polymerization contraction forces. Am J Dent (1997) 0.86
Effect of polyethylene fiber reinforcement on the strength of denture base resins polymerized by microwave energy. J Prosthet Dent (1994) 0.85
Cast metal, resin-bonded prostheses: a 10-year retrospective study. J Prosthet Dent (1989) 0.85
Curing light-activated composite cement through porcelain. J Dent Res (1989) 0.84
Auxiliary retention for complete crowns provided by cement keys. J Prosthet Dent (1981) 0.84
Effect of ultrasonic vibration on post removal in extracted human premolar teeth. J Endod (1996) 0.83
Effect of polyaramid fiber reinforcement on the strength of 3 denture base polymethyl methacrylate resins. J Prosthodont (2001) 0.83
Effects of secondary curing on indirect posterior composite resins. Oper Dent (1997) 0.82
Effect of varying etching times on the bond strength of ceramic brackets. Am J Orthod Dentofacial Orthop (1996) 0.81
Cusp movement in premolars resulting from composite polymerization shrinkage. Dent Mater (1993) 0.81
Dentin desensitizing agents: SEM and X-ray microanalysis assessment. Am J Dent (1997) 0.81
Auxiliary retention for intracoronal cast gold restorations. J Prosthet Dent (1980) 0.80
Creep of conventional and microfilled dental composites. J Biomed Mater Res (1984) 0.80
Dynamic viscoelastic behavior of resin cements measured by torsional resonance. Dent Mater (2003) 0.80
The effect of bonding agents on the interfacial bond strength of repaired composites. Dent Mater (1986) 0.80
Interferometric measurements of cusp deformation of teeth restored with composites. J Dent Res (1993) 0.80
Creep of posterior dental composites. J Biomed Mater Res (1985) 0.80
The effect of removal of the smear layer on microleakage of Class V restorations in vitro. Dent Mater (1988) 0.79
Mercury vaporization from corroded dental amalgam. Dent Mater (1988) 0.79
The use of debonding pliers in the removal of ceramic brackets: force levels and enamel cracks. Am J Orthod Dentofacial Orthop (1995) 0.79
Effects of polymerization techniques on uniformity of cure of large-diameter, photo-initiated composite resin restorations. J Am Dent Assoc (1986) 0.78
Repair of conventional and microfilled composite resins. J Prosthet Dent (1983) 0.78
Polymerization shrinkage of composite resins: comparison with tooth deformation. J Prosthet Dent (1994) 0.78
Effects of dentin permeability and hydration on the bond strengths of dentin bonding systems. Am J Dent (1993) 0.78
Debonding forces applied to ceramic brackets simulating clinical conditions. Angle Orthod (1994) 0.77
Softening effects of bases on composite resins. Clin Prev Dent (1983) 0.77
Effect of matrix systems and polymerization techniques on microleakage of Class II resin composite restorations. Am J Dent (1992) 0.77
Prediction of postpartum depression. NAACOGS Clin Issu Perinat Womens Health Nurs (1990) 0.77
Acid-etched, resin bonded cast metal prostheses: a retrospective study of 5- to 15-year-old restorations. Int J Prosthodont (1993) 0.77
Correlation between strength of bonding to enamel and mechanical properties of dental composites. J Biomed Mater Res (1982) 0.77
Curing light-activated composite resins through dentin. J Prosthet Dent (1985) 0.77
Effect of hybrid layer on fracture toughness of adhesively bonded dentin-resin composite joint. Dent Mater (1998) 0.77
Mercury vaporization during amalgam removal. J Prosthet Dent (1983) 0.77
The effect of rotary instrumentation on the permeability of dentin. J Dent Res (1981) 0.76
Rebonding composite resin to enamel at sites of fracture. Oper Dent (1980) 0.76
Enhancement of resin bonding to heat-cured composite resin. Oper Dent (1997) 0.76
Microleakage of indirect composite inlays. Dent Mater (1989) 0.76
The strength of multilayer and repaired composite resin. J Prosthet Dent (1978) 0.75
The effect of surface finish on the anodic polarization of a conventional spherical amalgam. J Biomed Mater Res (1978) 0.75
Effect of metal etching on crown retention. J Prosthet Dent (1986) 0.75
Serum indirect bilirubin levels and meconium passage in early fed normal newborns. Nurs Res (1987) 0.75
Rinsing times for a gel etchant related to enamel/composite bond strength. Gen Dent (1986) 0.75
Survey of high-speed cutting procedures used by general practitioners in the United States. Gen Dent (1989) 0.75
Effects of etching and rinsing times and salivary contamination on etched glass-ionomer cement bonded to resin composites. Dent Mater (1989) 0.75
Matrix systems for posterior composite restorations. Compendium (1987) 0.75
Bonding between acrylic laminates and composite resin. J Dent Res (1982) 0.75
Treatment of a single stained anterior tooth utilizing visible-light-cured opaquer resin and microfil composite resin. Iowa Dent J (1984) 0.75
The effect of finishing on the anodic polarization of high-copper amalgams. J Oral Rehabil (1978) 0.75
Detection of interproximal caries by transillumination. Gen Dent (1984) 0.75
Microleakage between light-cured composites and repairs. J Prosthet Dent (1986) 0.75
Shear strengths of ten commercial dentin bonding agents. Dent Mater (1987) 0.75
Survey of Des Moines area dental offices for mercury vapor. Iowa Dent J (1984) 0.75
The effect of burnishing on the mercury vapor emission of amalgam. J Dent Res (1977) 0.75
Mercury vapor expired after restorative treatment: preliminary study. J Dent Res (1979) 0.75
Effect of surface preparation on phase distribution of amalgam surfaces. J Dent Res (1978) 0.75
A computer program to aid in visual concept development in dentistry. Comput Methods Programs Biomed (1997) 0.75
The smear layer on dentin. A status report for the American Journal of Dentistry. Am J Dent (1988) 0.75
Bond strength of cements to nickel-chromium and silver-palladium alloys. J Prosthet Dent (1985) 0.75
A survey of Iowa dentist perceptions concerning the shortage of dental assistants. Iowa Dent J (1992) 0.75
Clinical use of anterior laminates--construction and placement. J Am Dent Assoc (1980) 0.75
Acid-etch retained cast metal prostheses: a seven-year retrospective study. J Am Dent Assoc (1984) 0.75
Teaching dental anatomy with light-activated resins. J Dent Educ (1984) 0.75
Comparison of the retentive strength of two cast gold pin techniques. J Prosthet Dent (1979) 0.75
Microstructure of amalgam surfaces. J Prosthet Dent (1976) 0.75
Composite resin compatibility and bond longevity of a dentin bonding agent. J Dent Res (1985) 0.75
Auxiliary retention for cast gold restorations. Quintessence Dent Technol (1981) 0.75
Estimation of the phase distribution in dental amalgam with the electron microprobe. J Dent Res (1978) 0.75
A comparison of two dentin bonding agents in primary and permanent teeth. Pediatr Dent (1986) 0.75
Creep of amalgam at low stresses. J Dent Res (1987) 0.75
The rubber dam--better than ever. Iowa Dent J (1988) 0.75
Microleakage of amalgam restorations with high-copper content. J Am Dent Assoc (1979) 0.75
Bond strengths of restorative materials to dentin. Gen Dent (1985) 0.75
Effect of clinical finishing procedures on amalgam microstructure. J Dent Res (1980) 0.75
Composite-resin restoration of a posterior tooth. Gen Dent (1985) 0.75
Marginal ridge strength of restored teeth with modified Class II cavity preparations. J Am Dent Assoc (1989) 0.75
The effectiveness of pins with complete cast metal crowns. J Prosthet Dent (1984) 0.75
Wet and dry high-speed cutting procedures used by recent Iowa graduates. Comparison of dental school and post-dental school practices. Iowa Dent J (1987) 0.75
Exhaled mercury following removal and insertion of amalgam restorations. J Prosthet Dent (1983) 0.75
Routine circumcision of the newborn: reasonable precaution or unnecessary risk? J Nurse Midwifery (1981) 0.75