Published in J Nurse Midwifery on February 24, 1981
The influence of water storage and C-factor on the dentin-resin composite microtensile bond strength and debond pathway utilizing a filled and unfilled adhesive resin. Dent Mater (2001) 1.12
Hardening of dual-cured cements under composite resin inlays. J Prosthet Dent (1991) 1.11
Evaluation of new methods for composite repair. Dent Mater (1992) 1.03
Effect of liners on cusp deflection and gap formation in composite restorations. Oper Dent (2001) 1.01
The contribution of dental amalgam to mercury in blood. J Dent Res (1989) 0.97
The effect of dental amalgams on mercury levels in expired air. J Dent Res (1981) 0.94
Comparative bond strengths of light-cured, heat-cured, and autopolymerizing denture resins to denture teeth. J Prosthet Dent (1989) 0.93
Build-up and repair of light-cured composites: bond strength. J Dent Res (1984) 0.93
Radiopacity of compomers, flowable and conventional resin composites for posterior restorations. Oper Dent (1999) 0.92
Mode of failure in the dentin-adhesive resin-resin composite bonded joint as determined by strength-based (muTBS) and fracture-based (CNSB) mechanical testing. Dent Mater (2001) 0.91
Effect of stepped light intensity on polymerization force and conversion in a photoactivated composite. J Esthet Dent (2000) 0.91
Photo-activation of resin cements through porcelain veneers. J Dent Res (1991) 0.90
Microtensile bond strength testing and failure analysis of two dentin adhesives. Dent Mater (1998) 0.90
Fracture resistance of endodontically prepared teeth using various restorative materials. J Am Dent Assoc (1987) 0.89
Aerobic exercise, maternal self-esteem, and physical discomforts during pregnancy. J Nurse Midwifery (1987) 0.89
Effect of a silane coupling agent on composite repair strengths. Am J Dent (1994) 0.89
Bond strength and failure analysis of light-cured denture resins bonded to denture teeth. J Prosthet Dent (1991) 0.88
Effect of composite type, light intensity, configuration factor and laser polymerization on polymerization contraction forces. Am J Dent (1997) 0.86
Effect of polyethylene fiber reinforcement on the strength of denture base resins polymerized by microwave energy. J Prosthet Dent (1994) 0.85
Cast metal, resin-bonded prostheses: a 10-year retrospective study. J Prosthet Dent (1989) 0.85
Curing light-activated composite cement through porcelain. J Dent Res (1989) 0.84
Auxiliary retention for complete crowns provided by cement keys. J Prosthet Dent (1981) 0.84
Effect of ultrasonic vibration on post removal in extracted human premolar teeth. J Endod (1996) 0.83
Effect of polyaramid fiber reinforcement on the strength of 3 denture base polymethyl methacrylate resins. J Prosthodont (2001) 0.83
Effects of secondary curing on indirect posterior composite resins. Oper Dent (1997) 0.82
Cusp movement in premolars resulting from composite polymerization shrinkage. Dent Mater (1993) 0.81
Dentin desensitizing agents: SEM and X-ray microanalysis assessment. Am J Dent (1997) 0.81
Effect of varying etching times on the bond strength of ceramic brackets. Am J Orthod Dentofacial Orthop (1996) 0.81
Interferometric measurements of cusp deformation of teeth restored with composites. J Dent Res (1993) 0.80
The effect of bonding agents on the interfacial bond strength of repaired composites. Dent Mater (1986) 0.80
Dynamic viscoelastic behavior of resin cements measured by torsional resonance. Dent Mater (2003) 0.80
Creep of conventional and microfilled dental composites. J Biomed Mater Res (1984) 0.80
Auxiliary retention for intracoronal cast gold restorations. J Prosthet Dent (1980) 0.80
Creep of posterior dental composites. J Biomed Mater Res (1985) 0.80
The effect of removal of the smear layer on microleakage of Class V restorations in vitro. Dent Mater (1988) 0.79
Mercury vaporization from corroded dental amalgam. Dent Mater (1988) 0.79
The use of debonding pliers in the removal of ceramic brackets: force levels and enamel cracks. Am J Orthod Dentofacial Orthop (1995) 0.79
Effects of polymerization techniques on uniformity of cure of large-diameter, photo-initiated composite resin restorations. J Am Dent Assoc (1986) 0.78
Repair of conventional and microfilled composite resins. J Prosthet Dent (1983) 0.78
Polymerization shrinkage of composite resins: comparison with tooth deformation. J Prosthet Dent (1994) 0.78
Effects of dentin permeability and hydration on the bond strengths of dentin bonding systems. Am J Dent (1993) 0.78
Prediction of postpartum depression. NAACOGS Clin Issu Perinat Womens Health Nurs (1990) 0.77
Effect of hybrid layer on fracture toughness of adhesively bonded dentin-resin composite joint. Dent Mater (1998) 0.77
Acid-etched, resin bonded cast metal prostheses: a retrospective study of 5- to 15-year-old restorations. Int J Prosthodont (1993) 0.77
Effect of matrix systems and polymerization techniques on microleakage of Class II resin composite restorations. Am J Dent (1992) 0.77
Curing light-activated composite resins through dentin. J Prosthet Dent (1985) 0.77
Debonding forces applied to ceramic brackets simulating clinical conditions. Angle Orthod (1994) 0.77
Correlation between strength of bonding to enamel and mechanical properties of dental composites. J Biomed Mater Res (1982) 0.77
Microleakage of indirect composite inlays. Dent Mater (1989) 0.76
Enhancement of resin bonding to heat-cured composite resin. Oper Dent (1997) 0.76
Rebonding composite resin to enamel at sites of fracture. Oper Dent (1980) 0.76
The effect of rotary instrumentation on the permeability of dentin. J Dent Res (1981) 0.76
The strength of multilayer and repaired composite resin. J Prosthet Dent (1978) 0.75
Shear strengths of ten commercial dentin bonding agents. Dent Mater (1987) 0.75
Serum indirect bilirubin levels and meconium passage in early fed normal newborns. Nurs Res (1987) 0.75
Auxiliary retention for cast gold restorations. Quintessence Dent Technol (1981) 0.75
Effect of metal etching on crown retention. J Prosthet Dent (1986) 0.75
The effect of finishing on the anodic polarization of high-copper amalgams. J Oral Rehabil (1978) 0.75
Microstructure of amalgam surfaces. J Prosthet Dent (1976) 0.75
The effectiveness of pins with complete cast metal crowns. J Prosthet Dent (1984) 0.75
Microleakage of amalgam restorations with high-copper content. J Am Dent Assoc (1979) 0.75
Bond strength of cements to nickel-chromium and silver-palladium alloys. J Prosthet Dent (1985) 0.75
Bonding between acrylic laminates and composite resin. J Dent Res (1982) 0.75
Effects of etching and rinsing times and salivary contamination on etched glass-ionomer cement bonded to resin composites. Dent Mater (1989) 0.75
Remineralization of dentin in vitro. Calcif Tissue Res (1976) 0.75
Acid-etch retained cast metal prostheses: a seven-year retrospective study. J Am Dent Assoc (1984) 0.75
Exhaled mercury following removal and insertion of amalgam restorations. J Prosthet Dent (1983) 0.75
The effect of surface finish on the anodic polarization of a conventional spherical amalgam. J Biomed Mater Res (1978) 0.75
Creep of amalgam at low stresses. J Dent Res (1987) 0.75
Mercury vapor expired after restorative treatment: preliminary study. J Dent Res (1979) 0.75
Bond strength and hardness of light-activated composite resins. J Biomed Mater Res (1984) 0.75
Estimation of the phase distribution in dental amalgam with the electron microprobe. J Dent Res (1978) 0.75
Effect of surface preparation on phase distribution of amalgam surfaces. J Dent Res (1978) 0.75
The effect of burnishing on the mercury vapor emission of amalgam. J Dent Res (1977) 0.75
Composite resin compatibility and bond longevity of a dentin bonding agent. J Dent Res (1985) 0.75
Comparison of the retentive strength of two cast gold pin techniques. J Prosthet Dent (1979) 0.75
Effect of clinical finishing procedures on amalgam microstructure. J Dent Res (1980) 0.75